Environmental Chambers

Environmental Chamber suits aerospace, automotive assemblies.

Air Houses accommodate aerospace and other highly controlled manufacturing processes that require large volumes of filtered, temperature- and humidified-controlled air. Able to maintain temperatures at ±3°F with ±5% RH, products sustain consistent air quality in extreme climate conditions. Air volume for these units ranges from 10,000-150,000 cfm, and construction features...

Read More »
Controls and Controllers

Specialty Igniters accommodate heavy fuel oil applications.

CoronaArc Power Pack is available in 3 models - 12 JOULE, RAPID FIRE; 12 JOULE, STANDARD-FIRE; and 12 JOULE - respectively suited for heavy fuel oil, relatively volatile heavy fuel oil applications, and ignition of No. 2 oil main nurners or gas/oil fuel igniters. While RAPID FIRE produces 12-15 pulses/sec at 600 W, STANDARD-FIRE produces 4-6 pulses/sec at 300 W, and 12 JOULE produces 4-6...

Read More »
Kennametal Launches Beyond BLAST(TM) at IMTS 2010, Booth W-1522
Coolant Systems

Kennametal Launches Beyond BLAST(TM) at IMTS 2010, Booth W-1522

Game-changing interface of tooling and coolant delivers outstanding tool life and productivity improvements (LATROBE, PA ) - With its introduction at IMTS 2008, Kennametal's innovative Beyond(TM) platform of high-performance turning products have garnered exceptional reviews from Kennametal customers worldwide. Due to higher metal-removal rates and extended tool life, these products are resulting...

Read More »
Condensers (Heat Transfer)

Siemens Receives Order for Largest Turbine-Generator Set Produced to Date in Gorlitz

Erlangen, Germany, 2010-06-07 - Siemens Energy has received an order for the largest three-cylinder steam turbinegenerator produced to date within the Industrial Power Business Unit. This condensing steam turbine-generator will in the future supply the Latvian capital Riga with district heat and electrical energy in the Riga TPP-2 Combined Cycle Co-Generating Facility (Riga TPP-2 Reconstruction...

Read More »
Insulation

Insulating Fiber Modules meet heat processing vessel needs.

Designed to meet application requirements in various types of heat processing vessels, Anchor-Loc® 3 Insulating Fiber Modules are constructed from inorganic spun fiber blankets and manufactured from either ceramic fiber or soluble fiber chemistries. Module features continuous fold of spun blanket, stainless steel alloy hardware, and center mount attachment. Production method used for...

Read More »
Hall-Effect Bipolar Switch provides low-jitter output.
Switches

Hall-Effect Bipolar Switch provides low-jitter output.

Suited for use in ring magnet-based speed and direction systems, A1230 monolithic IC contains 2 independent Hall-effect bipolar switches located 1 mm apart. Digital outputs are out of phase so that they are in quadrature when interfaced with proper ring magnet design. On-chip low dropout regulator facilitates use over wide operating voltage range. Device is available in lead free, plastic 8-pin...

Read More »
Direct Steam Injection Water Heaters are custom-engineered for operating conditions.
Heaters

Direct Steam Injection Water Heaters are custom-engineered for operating conditions.

Nominally available in 1.5-6 in. sizes, direct steam injection water heaters raise temperature of water and water-based slurries by injecting steam directly into fluid. They accommodate various industrial processing applications and are custom-engineered based on operating conditions to ensure optimal performance and efficiency. Absence of moving parts, with exception of actuator and modulating...

Read More »
Handling Equipment

Can-Eng Furnaces International Ltd to Supply a Complete OCTG Quench and Temper Line for Welded Tube of Canada

CAN-ENG FURNACES INTERNATIONAL LTD., (can-eng.com) has entered into a contract to supply a complete OCTG (Oil Country Tubular Goods) Quench and Temper line for Welded Tube of Canada. The state of the art facility will have the capability of heat treating tubing and casing in API 5CT grades L80/N80 and P110, with future considerations for Q125, in sizes 2.375" OD to 10.750" OD in lengths of 28' to...

Read More »
E-Switch Announces a Full Line of Anti-Vandal Switch Products
Switches

E-Switch Announces a Full Line of Anti-Vandal Switch Products

MINNEAPOLIS, MN - E-Switch's anti-vandal switch series are now available at your major distributor. The anti-vandal switch line consists of 8 series that vary in panel cut-out size and actuator options. Switch specifications include: o 2A 48VDC electrical ratings o Between 12 to 25mm panel cutout diameter o IP65 water resistance ratings o Screw or solder termination options o Domed, flat,...

Read More »
Face Mill Inserts work with aluminum, non-ferrous materials.
Inserts

Face Mill Inserts work with aluminum, non-ferrous materials.

WIDIA(TM) inserts for WIDIA Victory M1200(TM) face mill series are designed to provide optimal results in aluminum for milling operations. Also applicable to other non-ferrous materials, inserts come in 2 separate geometries - LDJ and LDJ3W - that both exhibit toughness and wear resistance and feature 12 cutting edges. LDJ geometry features optimized rake angles and is designed to be...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics