Eraser Co. to Display Products at the MD&M West Expo: Booth #1745
Handling Equipment

Eraser Co. to Display Products at the MD&M West Expo: Booth #1745

(Syracuse, NY): The Eraser Company, Inc., manufacturers of wire, cable and tube processing equipment, will display their top quality industrial processing equipment at the 2011 Medical Device Manufacturing West Expo (MD&M West) from February 8th through the 10th in Anaheim, CA. This exciting show provides Eraser with the perfect venue for hands-on demonstration of their world-class medical...

Read More »
Replace Your Paper Towel Dispenser with the X-Changer Hand Dryer Kit
Hand Dryers

Replace Your Paper Towel Dispenser with the X-Changer Hand Dryer Kit

The newly developed X-CHANGER kit allows you to convert your existing paper towel dispenser and waste receptacle to an XLERATOR® hand dryer station. The X-CHANGER is designed to match the dimensions of the former paper toweldispenser and waste receptacle, thus there is little or no wall repair required. The finished product leaves your restroom modern, clean and beneficial to the environment....

Read More »
Heaters

CCI Thermal Technologies Inc. is proud to Introduce the Cata-Dyne(TM) LS, Liquid Start Catalytic Heater

Edmonton - CCI Thermal Technologies Inc is proud to announce the release of the Cata-Dyne(TM) LS. With the same reliability, versatility and ingenuity of the Cata-Dyne(TM) family of heaters the Cata-Dyne(TM) LS has been coupled with an evolution in technology improving start-uptimes from 15 minutes to less than 5 minutes, while simplifying the installation and lowering costs. CCI Thermal centered...

Read More »
Sleeves

Koat-A-Roll Makes Prime Time

Alsip, IL-As a leading polyurethane manufacturer in the Material Handling industry, Kastalon has had the opportunity to work with a wide variety of conveyor manufacturers on an abundance of projects. In fact, it is hard to believe that Koat-A-Roll conveyor roller sleeves and its family of products were introduced to the market more than 30 years ago. Koat-A-Roll has become a standard tool in an...

Read More »
Miscellaneous Seals

Tubular Heating Elements use high-temperature end seal.

Designed and built to meet requirements of both UL499 and UL1030, epoxy-based High Temperature End Seal is rated up to 392°F and is suited for Caloritech(TM) tubular heating elements used in demanding applications such as industrial process heating equipment and commercial heating and cooking appliances. Heating elements using end seal are protected from effects of moisture absorption...

Read More »
Rolling Bed Dryer handles Green and organic waste.
Air / Hot Air Dryers

Rolling Bed Dryer handles Green and organic waste.

Using low-temperature waste heat for drying, Rolling Bed Dryer steadily and homogenously mixes non-uniform bulk material. System can convey very irregular shredded organic waste or unwieldy bulk like branches and tree cuttings, bark, and leaves, as well as unevenly cut wood chips. With dryer, users can produce new and alternative fuels from preparation and drying of organic wastes such as wood...

Read More »
Fire Stop Insulation comes in convenient contractor package.
Insulation

Fire Stop Insulation comes in convenient contractor package.

Designed for plumbers, electricians, HVAC, and telecommunication installers, SafingPaks are precut pieces of UL and Intertek listed/tested Safing Insulation, packaged in bag with resealable opening and handle. Mineral wool insulation offers up to 90% recycled content and contributes to 33 LEED® credits across 4 categories. Product provides fire protection in floor/ceiling and wall...

Read More »
Heaters

Engine Oil Preheater Kits target air-cooled engines.

Available in sizes based on 120 or 240 V energy needed for capacity of housing, Universal Low Watt Density Preheater(TM) Kits feature flexible silicone/fiberglass heating pad that mounts to outside of housing using permanent adhesive. Flexible ceramic insulation is mounted on top of preheater to keep electrical energy draw low. Preheater converts metal of housing into heat transfer element,...

Read More »
Heat Treatment Equipment

Laser Spike Anneal System supports leading-edge logic devices.

Suited for front-end-of-line and middle-of-line applications, dual-beam Model LSA100L supports low-temperature processes such as nickel silicide formation. Single narrow CO2 laser beam heats wafer surface from substrate temperature of 400°C to peak annealing temperature in range of 1,100-1,350°C, while second laser beam is used to locally preheat wafer. Built on customizable Unity...

Read More »
Digital Stirring Hot Plate provides 5 stirring positions.
Stirrers

Digital Stirring Hot Plate provides 5 stirring positions.

Suited for laboratories where reproducible, hands-off sample preparation and experimentation are required, EchoTherm(TM) Model HS65 features 12 x 12 in. solid ceramic glass heater plates that can be heated from ambient to 400°C. Stirring speed is 100-1,500 rpm and controlled by optical coupler to 10 rpm. With Model HS65, programming is done through front panel membrane switch and...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers