Thermal & Heating Equipment

HVAC, Thermal & Heating Equipment

Seginus Inc. is Pleased to Introduce Immersion Heater 200-0368-01EH and Heater Assembly 3575-1251-05EH

Nov 02, 2015

The replacement Immersion Heater and Heater Assembly are eligible for installation in Aircraft Coffee Makers Bombardier, Inc. Airbus Model Eligibility: Various For more specific model eligibility details, please see the supplements section of our website. For sales information, please contact your regional distributor or our USA offices. OEM Part Numbers: 200-0368-01 3575-1251-05 PMA Part... Read More

Green & Clean, Thermal & Heating Equipment

Smart and Flat Flame Oxy-Fuel Burners meet glass industry needs.

Nov 02, 2015

Targeting glass industry applications, Cleanfire® HRe™ smart burner includes sensors that monitor key burner conditions. Data enables glass manufacturers to optimize burner performance in furnace as well as monitor conditions that may require operator attention. Also available, oxy-fuel flat flame burner offers independent control of flame length and luminosity, furnace atmosphere control at... Read More

Thermal & Heating Equipment

Cast Metal Heat Sinks Cool Large Scale Outdoor Lighting Systems

Oct 30, 2015

Norwood, MA – Advanced Thermal Solutions, Inc. ATS, now uses advanced die casting technology to produce heat sinks that cool stadium lighting and other large scale outdoor lighting systems. At the site of the 2015 Super Bowl (XLIX) in Glendale, Arizona, cast metal heat sinks from ATS helped cool the high output LED lighting around the University of Phoenix Stadium. The University of Phoenix... Read More

Chemicals & Chemical Processing, Controls & Controllers, Fluid & Gas Flow Equipment, Laboratory and Research Supplies and Equipment, Test & Measuring Instruments, Thermal & Heating Equipment

Reaction Systems offer trouble-free reproducibility.

Oct 30, 2015

In addition to fully or partially automated reaction solutions known as JULABO AutoReactors™, Reaction Solutions Portfolio includes glassware, stirrers, vacuum pumps, hot plates, and controllers. Systems ensure accurate temperatures as well as exact dosing of components, proper stirring or mixing, continuous monitoring and analysis, and reliable control of parameters. Read More

Material Handling & Storage, Thermal & Heating Equipment, Transportation Industry Products

Seginus Inc. is Pleased to Introduce Replacement Heater Cartridges: 440-0150-3EH, 3520-0551-01EH, 3575-1251- 07EH, 3575-1252-05EH, 6001-99-0538EH, 11056-1EH, 240233EH, 609604EH, and 611765EH

Oct 30, 2015

Seginus Inc. is pleased to introduce Replacement Heater Cartridges: 440-0150-3EH, 3520-0551-01EH, 3575-1251-07EH, 3575-1252-05EH, 6001-99-0538EH, 11056-1EH, 240233EH, 609604EH, 611765EH These replacement heater cartridges are eligible for installation in Galley coffee makers and water boilers on various Boeing and Airbus aircraft. Boeing and Airbus Model Eligibility: Various For more specific... Read More

HVAC, Thermal & Heating Equipment, Transportation Industry Products

Seginus Inc. is Pleased to Introduce the RGS3179-EH Water Boiler Heater Element

Oct 29, 2015

The RGS3179-EH Water Boiler Heater Elements are eligible for installation on Rumbold/Britax Sell GmbH aircraft Water Boilers. Heater Elements are eligible for installation Rumbold/Britax Sell GmbH Water Boilers P/N 62197-001-001 Model Eligibility: Boeing Company: 717, 737, 757, 767, and 777 For more specific model eligibility details, please see the supplements section of our website. For sales... Read More

HVAC, Thermal & Heating Equipment, Transportation Industry Products

Seginus Inc. is Pleased to Introduce the 24D507239P02EH Heater Cartridge

Oct 29, 2015

The 24D507239P02EH heater cartridge is eligible for installation on various Airbus aircraft lavatory water heaters. The lavatory water heater heats a small amount of water for hand and face washing. Airbus Model Eligibility: A310 A320 A330 A340 For more specific model eligibility details, please see the supplements section of our website. For sales information, please contact your regional... Read More

Thermal & Heating Equipment

Aluminum Melting and Holding Furnace has 13,700 lb max capacity.

Oct 27, 2015

Along with steel plate construction and steel member-reinforced shell, aluminum melting and holding furnace (gas fired) features roof-mounted, nozzle-mix radiant burner; pneumatic flue damper; drain tap; and UL-listed control panel. Holding capacity is 13,700 lb, and melting rate is 1,500 lb/hr. While preheat hearth with full width door is used for loading ingot, clamshell door... Read More

HVAC, Thermal & Heating Equipment, Transportation Industry Products

Seginus Inc. is Pleased to Introduce 439009071EH Heater Element Kit

Oct 27, 2015

The Heater is used in the B/E Aerospace Model DR4180 Series Water Heater and is installed on various Airbus and Boeing Aircraft. The water heater is used in the aircraft galley to heat water for catering purposes. Seginus Inc. has released the following FAA PMA replacement parts to aid in your cost reduction programs when maintaining your B/E Water Heaters Heater Element Kit 439009071EH For... Read More

Materials & Material Processing, Thermal & Heating Equipment

Walk-In Preheating Oven reaches temperatures up to 900°F.

Oct 26, 2015

Along with 50 x 96 x 96 in. workspace, No. 846 features 8 in. thick insulated walls, 6 in. insulated floor, aluminized steel interior and exterior, and removable, top-mounted heat chamber. One 7,800 cfm, 5 hp, recirculating blower provides combination airflow to workload, and access to Type 304, 2B finish stainless steel heat chamber interior is facilitated by 2 independent doors... Read More

Materials & Material Processing, Thermal & Heating Equipment

Cold Car Batch Oven is used for stress relieving of weldments.

Oct 26, 2015

With 15 x 10 x 10 ft work chamber and powered load/unload cold car, gas-fired cold car industrial batch oven can be used for stress relieving steel assemblies weighing up to 20,000 lb. Oven features Expandable Surface® design and operating temperature range of 250°F above ambient to 1,250°F max. To provide even heating and temperature uniformity, recirculation system utilizes... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment, HVAC, Materials & Material Processing, Thermal & Heating Equipment

Belleville Wire Cloth Co., Inc. to Show Off Latest Wire Mesh Products at 2016 AHR Expo

Oct 26, 2015

Belleville Wire Cloth Co., Inc. is proud to announce, that they will be taking part in the 2016 AHR Expo (International Air-Conditioning, Heating, and Refrigerating Exposition). This year Belleville Wire Cloth will be showing off some of their latest products, including samples, in BOOTH # 3867. The show itself will be taking place between January 25th and 27th, 2015 at the Orange County... Read More

Thermal & Heating Equipment

LEWCO Designs Oven for Curing Edge Sealants on Structural Composite Beams

Oct 23, 2015

SANDUSKY, OH - When a leading aerospace company approached LEWCO Application Engineer's with a rather unique curing application, you can bet they figured out the preeminent solution.  The application?  Curing edge sealants on structural composite beams up to 20 ft. long, while maintaining a continuous process to meet production requirements. The solution?  One cost-effective,... Read More

Thermal & Heating Equipment

Heat-Exchanger Unit Heaters suit rugged applications.

Oct 20, 2015

Comprising 16 models, HHP2 Hydronic High Performance Series is suited for rugged industrial applications in steam, hot water, glycol, or other fluid circulating heating systems. Units are designed for pressures and temperatures to 450 psi and 550°F, respectively, in single-pass and multi-pass core configurations. Series includes 30 in. fan size model, which integrates single multi-wing fan... Read More

Mechanical Components and Assemblies, Thermal & Heating Equipment, Transportation Industry Products

Seginus Inc. is Pleased to Introduce FAA PMA Approved Replacement Parts for Hamilton Sundstrand Propeller De-Ice Brush Block Assemblies

Oct 20, 2015

The Seginus Inc. Teflon pad EH789285-1 and carbon brush EH738466-6 are applicable for installation on Hamilton Sundstrand 782689-X de-ice brush blocks. The 782689-X brush block is installed on various aircraft. Model Eligibility: DHC-8-100, -200, -300 ATR 42, ATR 72 CL215T, CL415 XIAN Y7-200A For more specific model eligibility details, please see the supplements section of our website. For sales... Read More

Thermal & Heating Equipment

Exhaust Gas Heating System maximizes engine performance.

Oct 19, 2015

Functioning as internal load bank in medium stationary and mobile diesel generator applications, ECO-HEAT® helps eliminate problems encountered under low generator load conditions, such as increased engine back pressure. System is installed in exhaust pipe and provides heat directly where it is needed within aftertreatment system. Using electricity from generator, unit has dual effect of... Read More

Thermal & Heating Equipment

Heat Exchanger Unit Heaters serve rig-based steam applications.

Oct 19, 2015

Steam Rig Heater (SRH2) series serve steam applications on drilling rigs where boiler failure or system neglect can lead to freeze-up conditions. During accidental freeze-up, SafeDeform™ core headers accommodate ice expansion. Products accept operating steam pressures up to 150 psig in single-pass configurations and meet ASME requirements with National CRN to conform to Safety Codes Act. Also... Read More

Thermal & Heating Equipment

Heat-Exchanger Unit Heaters meet ASME requirements.

Oct 19, 2015

Suited for rugged industrial applications in steam, hot water, glycol, or other fluid circulating heating systems, HUH2 Hydronic Unit Heater Series is designed for pressures and temperatures up to 400 psi and 500°F, respectively, in single-pass and multi-pass core configurations. Series includes 36 in. fan size model which integrates speed reducer instead of pulleys and fan belts. HUH2... Read More

Green & Clean, Thermal & Heating Equipment

Residential Gas Furnaces combine 2-stage heating, ECM motor.

Oct 19, 2015

York LX Series TM8Y and ENERGY STAR®-rated TM9Y respectively deliver efficiencies up to 80% and 96% AFUE. Factory-shipped for upflow or horizontal applications, furnaces can be converted for downflow applications. Accessible controls and lack of knockouts aid installation, and 33 in. cabinets fit in space-restricted areas. Other features include self-diagnostics with fault code... Read More

Materials & Material Processing, Thermal & Heating Equipment

Lindberg/MPH Announces Exclusive Three-Year Warranty on New Equipment Purchases

Oct 19, 2015

Lindberg/MPH, a leading manufacturer of melting and holding furnaces for non-ferrous alloys and standard and custom industrial heat-treating furnaces for both ferrous and non-ferrous markets, today announced it has begun offering a three-year warranty on all new equipment purchases. This exclusive warranty covers all materials for all components (with the exception of wear items), including, but... Read More