Thermal & Heating Equipment

Thermal & Heating Equipment

Modular Heater provides concentrated, high power.

Sep 03, 2002

High Power Reflector, a 40 kW fiber-insulated, modular heater, for use in foundry and metal processing industries, is designed for power up to 10 kW/ft² at 1650°C. Each module consists of heating elements set into ceramic fiber and contained in sheet-steel casing. Standard unit is 24 x 24 in. and multiple units can be joined together in rows or squares. Heater is suitable for single billet... Read More

Thermal & Heating Equipment

Heaters conform to curved cylindrical and 3D surfaces.

Aug 30, 2002

Custom designed for each application, Molded-To-Shape® heaters are designed with single and multi-layer etched or wire wound circuits. Single, multiple, and variable watt densities can be designed into heaters. Available dielectric substrate materials include silicone, polyimide, neoprene, and polyester. Used to prolong battery life in cold environments, heaters suit aerospace electronics, copy... Read More

Thermal & Heating Equipment

Induction Heating Systems provide continous heating.

Aug 28, 2002

Induction Heating Systems provide non-contact, continuous heating with accurate temperature control in compact coil designs. For wire and cable applications, systems can provide normalizing, stress relieving, annealing, hardening, curing, and coating. Processes can be completed while wire or cable is moving through coil. Induction heating provides high temperatures (4000°F) necessary to melt... Read More

Thermal & Heating Equipment

Invisible Heat Source keeps displays working in the cold.

Aug 27, 2002

Thin, optically clear CLEARVIEW film contains micro resistance heating element that maintains legibility of electronically generated text on instrument screens used outdoors or in cold environments. It allows undistorted high definition viewing of information on hand-held instrument screens and displays. Embedded temperature sensor covers specified area over heater element close proximity of... Read More

Thermal & Heating Equipment

Portable Heater keeps workers and equipment warm.

Aug 14, 2002

Maxi-Heat features indirect fired design, which eliminates problem-causing moisture. Unit draws in and heats outside air, delivering contaminant-free, warm, dry air. Enclosed twin heater units are rated at total output of 1,000,000 BTUs per hour delivering maximum of 5600 cfm, with as much as 180°F temperature rise above ambient. Maxi-Heat uses Isuzu power unit and 191 gal fuel tank, permitting... Read More

Thermal & Heating Equipment

Heaters prevent pipes from freezing.

Aug 13, 2002

Able to heat pipes in high altitudes and cold climates, Spiral heaters are available with different heating element designs, including single and multi-layer etched circuits and single and multi-layer wire wound circuits. Single, multiple, and variable watt densities can be designed into spiral heaters to suit specific application needs. Dielectric substrate materials available include silicone,... Read More

Thermal & Heating Equipment

Induction Heating Equipment also quenches and cools parts.

Aug 13, 2002

IHScanner vertical scanning system has solid state power supply, dual spindle heat treating system, and part quenching and recirculating components. It is capable of heat treating cylindrical parts from 0.38 to 1.00 in. dia and up to 17 in. in length. It is available in power ratings from 25 to 100 kW and frequencies from 25 to 200 kHz. System is shipped ready to operate, requiring only 3-phase,... Read More

Chemicals & Chemical Processing, Thermal & Heating Equipment

Dryers/Ovens maintain peak operating efficiencies.

Jul 12, 2002

Custom product line includes arched or flat roll support dryers, vertical tower dryers, and high velocity jet tube impingement ovens. Drying uniformity is achieved with air nozzles and/or impingement hardware. To accommodate future production volume increases, equipment can be designed and manufactured in modular style. Read More

Thermal & Heating Equipment

Insertion Heaters are split along length of cartridge sheath.

Jun 24, 2002

Model SST has single split sheath, with 2 sections that expand outward. QST, or Quad model has additional sections that expand outward in 4 directions. Both have single-circuit design, provide sheath temperatures up to 1400°F, and watt densities up to 100 W/sq in. Heaters have Incoloy® sheath and ceramic bushing under potting cap providing isolation of connector. SST ranges from 3/8 to 3/4 in... Read More

Thermal & Heating Equipment

Vaporizer keeps fluids at high temperature.

Jun 20, 2002

Vaporizer maintains recirculating fluids such as Dowtherm® A, Dowtherm® J, and Therminol® VP-1 at temperatures as high as 750°F. It uses vapor phase of heat-transfer fluids to promote high heat transfer rates and control temperature. Other liquids that can be vaporized include ammonia and liquified gases. Read More

Materials & Material Processing, Thermal & Heating Equipment

Muffle Furnace is offered in basic and programmable models.

Jun 17, 2002

StableTemp muffle furnace (33858-Series) is available in three sizes with three controller options. Maximum temperatures can be reached in 25 minutes. Its autotune feature eliminates temperature overshoot, while embedded heating elements maintain temperature uniformity. Other features include insulation and auto power cutoff. Unit includes LED display that toggles between actual and set point... Read More

Thermal & Heating Equipment

Immersion Heaters warm up liquids in tanks and drums.

Jun 12, 2002

Over-the-Side heaters are suitable for heating clear, opaque, or hard-to-heat liquids ranging from water to raw crude. Heaters are available in many configurations with capacities from 8 to 120 kW and lengths from 21 to 124 in. They have welded incoloy heating elements that resist corrosion, sealed terminals, and welded spacers. Heaters may be removed for cleaning or repairs. Read More

HVAC, Thermal & Heating Equipment

Heat Exchangers and Chillers have non-ferrous water circuits.

May 30, 2002

CLIMET-HE(TM) regenerative turbine-pump and CLIMET-HE-200 brazed-plate heat exchangers operate from 380-460 and 200-240 Vac, respectively. Thermal capacity of 44kW handles all plasma guns. CLIMET-RC(TM) Refrigerated Chiller works in tandem with CLIMET-HE, supplying chilled water to cool heat exchanger at up to 98 l/min and at temperatures as low as 7°C. CLIMET-RC-HV(TM), rated at 16.4 kW, has... Read More

Thermal & Heating Equipment

Dual Furnace saves space.

May 30, 2002

Model AY Controlled Atmosphere Hardening Furnace can be combined with Model HT Recirculating Air Tempering Furnace in dual furnace configuration. Model AY furnace can be used with Diamond Block system of atmosphere control, a carbonaceous box that automatically provides protective atmosphere for tool steel hardening. Model HT offers recirculating air system providing efficient heat transfer and... Read More

Laboratory and Research Supplies and Equipment, Thermal & Heating Equipment

Clean Process Oven for semiconductor industry.

May 29, 2002

LCC2-14 has chamber volume of 14 cu ft, large enough to handle thermal processing of 200 and 300 mm semiconductor wafers. It has stainless steel interior with continuously welded seams to protect work chamber from contamination. Oven is SEMI S2 and CE compliant, can be configured for multiple voltages and 50/60 Hz, and has UL and C-UL listed open control panel with lockable disconnect switch.... Read More

Construction Equipment and Supplies, Thermal & Heating Equipment

Platform is suitable for use as server and render farm.

May 16, 2002

Fully PICMG 2.16 PSB-compliant nFUZION-8U/CHP CompactPCI(R) NEBS Compute Farm Platform measures 8U high and offers Red Hat Linux and Windows operating system support, 8+8+2-slot split backplane, 4-16 IBP Dual Pentium(R) III Single Board Computers, and 2 PICMG 2.16 Layer 3 managed switches. Additional features include optional IBP fully IPMI compliant System Management Controller with SNMP... Read More

Thermal & Heating Equipment

Photoresist Oven allows automated handling of 300 mm wafers.

May 02, 2002

Company's 300mm Automated Photoresist Bake Oven offers 2 Front-Opening Unified Pod (FOUP) loadport stations with atmospheric Class 1 clean room-compatible robots and optically based Class 1 laser cassette mapping sensors. Its 2 heat treatment chambers hold 25 wafers each during photoresist bake cycle. Temperature uniformity is +/-1.5 deg C at 95 deg C operating temperature (150 deg C max). It... Read More

Thermal & Heating Equipment

Walk-In Oven provides 500 deg gas heat.

Apr 30, 2002

No. 884 offers workspace dimensions of 52 in. wide, 48 in. deep, and 72 in. high. It is heated by modulating natural gas burner, which provides 350,000 Btu/hr, while 4200 cfm, 3 hp recirculating blower provides horizontal airflow across workload. Oven has stainless steel exterior with #4 brushed finish, Type 430 stainless steel interior, 4 in. thick insulated walls, and 2 in. thick insulated... Read More

Thermal & Heating Equipment

Reflow Oven has flux management system and touch-screen.

Apr 29, 2002

SMT 1.7TC solders most paste at set temperature up to 40 deg C while consuming only 3 kW per hour. Slot nozzles are installed perpendicular to conveyor at top and bottom of oven's peak zone and act like curtain of hot air that boards must pass through. After heat is transferred to board, air is sucked back into channels beside nozzles for reheating. Short travel distance allows for fan capacity... Read More

Thermal & Heating Equipment

Heat Trace Cables work in hazardous applications.

Apr 26, 2002

HSRM and SRM/E heat trace cables are Factory Mutual approved at upgraded temperature ratings for use in Class I - Division 1, Class II - Division 1, and Class III hazardous environments. Approval ratings are for temperature ranges up to 302 deg F for process temperature maintenance and 420 deg F for maximum continuous exposure. SRM/E cable has been rated for high-pressure steam cleaning... Read More