A Red Hot Connection
Shafts

A Red Hot Connection

The composite camshaft is still gaining ground in the marketplace. The main reason for this is the considerable weight reduction it brings, compared to its one-piece rival. The composite version is by now also widely used in the HGV sector. However, the main disadvantage of many current assembly processes is the high joining force applied, which creates unacceptable tolerances in positioning and...

Read More »
Furnaces

The Ipsen Standard of Excellence Reaches Globally

CHERRY VALLEY, IL – Within the next eight weeks, Ipsen Group will be shipping 27 vacuum furnaces to diverse customers and regions all over the world. These shipments represent a comprehensive overview of the Ipsen product line. The furnaces, shipping out of the USA and Europe manufacturing sites, are for the Raw Materials, Energy, Aerospace, Medical, Mint (Currency), Commercial Heat Treating...

Read More »
Switches

New Protective Cover for Pressure & Temperature Transmitter/Switches

Berea, Ohio - NOSHOK is now offering a new protective cover option for our electronic indicating pressure and temperature transmitter/switches, which protects the sensor while maintaining clear viewing and rotation of the display. Constructed from a thermoplastic polyurethane (TPU) material which is resistant to oil, grease and abrasion The elastic properties of the material allows set point...

Read More »
Boilers

Iggesund Creates New Energy Market

WorldPressOnline First Call - Iggesund Paperboard's new biofuel boiler is ready for operation in Workington, England at a cost of 108 million pounds. The purpose is to supply the mill's entire energy requirements with self-produced energy in the form of steam and electricity. This is a radical change of energy source," comments Ola Schultz-Eklund, managing director of the mill. "At one fell swoop...

Read More »
MIL-STD is Standard in KCB Booth at IMS 2013
Switches

MIL-STD is Standard in KCB Booth at IMS 2013

Shirley, MA – KCB Solutions, (www.kcbsolutions.com), an ITAR and AS9100 accredited microwave design and manufacturing center, is pleased to announce a suite of MIL-STD certified products and services for the military, aerospace, and defense market. They’ll be exhibiting in booth #1610 at the International Microwave Symposium in Seattle, WA June 4-6th. Senior staff will be on-hand to answer...

Read More »
Welders

Mi-T-M Announces New Compressor/Generator/Welder Model.

Powered by- 688cc Honda OHV engine with electric start, Model AGW-SH22-20M combines cast iron 2-stage compressor, with 29.0 cfm rating; industrial 5,000 W generator, with AC output of 4,500 W and alternator wattage of 4,500 W; and 220 A arc welder. Frame features powder-coated, ASME-coded, 20 gal receiver tank; ¼ in. base plate; and 14 gauge, powder-coated, 4-piece belt guard. Other...

Read More »
Turbines

GE's ORegen Waste Heat Recovery System to Boost Brunei Power Station Output with No Additional Emissions

GE Supplying ORegen System with Consortium Partner Boustead International Heaters Project to Increase Berakas Power Station's Output, without Additional Fuel or Water Augmentation Project Supports Sultanate' Green Brunei Initiative BANDAR SERI BEGAWAN, BRUNEI — Berakas Power Company (BPC), Brunei's national energy company, plans to install GE Oil Gas' (NYSE: GE) innovative ORegen™ waste-heat...

Read More »
Clean Up Your Test Bench with a Little Help from Vaunix's Lab Bricks at IMS 2013
Switches

Clean Up Your Test Bench with a Little Help from Vaunix's Lab Bricks at IMS 2013

Haverhill, MA – Vaunix Technology Corporation, (www.vaunix.com), a manufacturer of USB controlled and powered test equipment, is pleased to announce they’ll be displaying their latest models of USB powered Lab Bricks at the International Microwave Symposium (IMS) in Seattle, WA June 4-6th in booth #2042. Controlled and powered through the USB interface of a computer, these signal generation,...

Read More »
Carpet Dryers deliver max air velocity of 3,400 fpm.
Fans

Carpet Dryers deliver max air velocity of 3,400 fpm.

Measuring 11.5 in. high and weighing about 18 lb, Hybrid 3-Speed Air Dryers combine squirrel cage design with drying power of axial fan. Portable, stackable units are built with heavy-duty, co-polymer polypropylene housing to withstand everyday use of contract cleaners and restoration professionals. Drawing maximum of 2.8 A, dryers help to prevent brownouts and circuit blowouts. In addition, up...

Read More »
Insulation

Spray Foam Insulation increases building energy effiency.

Helping reduce- energy needed to heat and cool building, DuraTite™ 2.0 closed cell spray polyurethane foam insulation is formulated so that it can be applied on substrates with wide temperature range. This 245fa-blown spray foam insulation, suited for specific applications where vapor drive is of concern, seals and insulates in one step, providing installed R-value of 6.3 at 1...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics