Ovens

Continuous Conveyor Oven optimizes curing cycle efficiency.

Featuring overall dimensions of 14 ft 4 in.Â- x 6 ft 6 in. x 30 ft 4 in. and operation from 200–662°F, Model DTI-390 incorporates conveyor belt that accommodates parts across its entire width, ensuring that each part receives equal amount of airflow. System includes curing chamber, cooling chamber, and 5 individual zones of control, each utilizing its own full...

Read More »
Infratrol Ships Refrigerator Preheat Ovens to World-Wide Appliance Manufacturer
Ovens

Infratrol Ships Refrigerator Preheat Ovens to World-Wide Appliance Manufacturer

• Electrically heated preheat conveyor oven • For preheating refrigerator cases • 135Â-º normal temperature, 150º maximum temperature • Maximum product size 68” W x 36” H, 100 lb each • 30” high conveyor SPECIAL FEATURES • Non-Contact Temperature Sensor – Senses the temperature of the case at the last position inside the oven. • Closed-Loop Temperature Control...

Read More »
Innovision Co. Brings BTU's DYNAMO(TM) 10A to NEPCON Korea
Ovens

Innovision Co. Brings BTU's DYNAMO(TM) 10A to NEPCON Korea

NORTH BILLERICAÂ- – BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing and alternative energy markets, announces that its representative Innovision Co. will exhibit its DYNAMO™ in Booth T113 at SMT/PCB & NEPCON Korea, scheduled to take place April 2-4, 2014, at the Coex Convention & Exhibition Center in Seoul, South...

Read More »
5ME Named Partner in THINC
Software

5ME Named Partner in THINC

Leading developer of cryogenic machining and advanced manufacturing software joins Okuma's network of industry leaders dedicated to improving manufacturing efficiency. 5ME has been named a Partner in THINC by Okuma America, joining more than 40 technology leaders focused on developing specialized manufacturing systems to increase the competitiveness of Okuma's customers. The consortium works to...

Read More »
Boilers

Indeck Introduces Program to Help Plants Meet Boiler MACT Electric Power Expo 2014 in New Orleans

Wheeling, Illinois –Â- Indeck has been a leader in providing power steam generation equipment to power plants, refineries, steel mills, processing plants, pulp industry, food processors and utilities nationwide.  Indeck understands that the Boiler MACT compliance is of key concern to plant operators.  To assist, plant managers, engineers and owners meet MACT compliance,...

Read More »
Ipsen Sees Increase in Demand for Hot Zones and Retrofits
Maintenance and Repair Services

Ipsen Sees Increase in Demand for Hot Zones and Retrofits

CHERRY VALLEY, IL – In the first quarter of 2014, Ipsen's Engineered Components Group has seen a large increase in vacuum and atmosphere furnace hot zone and retrofit orders compared to the same period in 2013. Orders include 27 hot zones, 37 controls upgrades and 23 mechanical retrofits for several Ipsen customers, both domestically and internationally, in Steel Brazing, Tool & Die, Medical...

Read More »
Furnaces

Linde "flameless" REBOX® oxyfuel and other Combustion Technologies Help Steel Producers and Mills Balance Profitability and Production Demands

MURRAY HILL, N.J. and NEW PROVIDENCE, N.J.Â- – Linde LLC ( Linde"), a global leader in technologies and industrial gases for all steps in the steel mill process chain, will feature proven solutions at AISTech 2014 to help mills strike the right balance between profitability and production objectives through improved process reliability, cost efficiency, productivity and product...

Read More »
Retrofit Packages prevent engine under- and over-cooling.
Assemblies

Retrofit Packages prevent engine under- and over-cooling.

Effective in all climates, Modulator® Fully Variable Retrofit Packages deliver optimized engine cooling. Packages replace on/off fan drives for heavy-duty, line-haul and severe-duty, vocational trucks where pneumatically actuated fan clutches over-cycle or do not provide optimum performance. Functionality promotes accelerated cab warm-up, efficient air-conditioning, and quiet operation...

Read More »
University of Washington Brings Their Heat Treating In-house with a Lucifer Furnace
Furnaces

University of Washington Brings Their Heat Treating In-house with a Lucifer Furnace

Lucifer Furnaces was the equipment choice for University of Washington students who petitioned the Dean of Engineering for a model HL7-P36 for their Engineering Instructional Shop as a replacement for an antiquated, unreliable, smaller unit. The new furnace, with a work chamber of 18”x24”x36” will allow the students to heat treat more parts in-house. According to one testimonial “Key to...

Read More »
Condensers (Heat Transfer)

World Premiere: BITZER Ammonia Compressor Pack

The specialist for refrigeration compressors showcases its newly developed modular ammonia compressor units for industrial applications at IIAR • New: oil separator and controller • The BITZER ammonia compressor pack (ACP) is reliable, durable and efficient • Comprehensive service and training concept Nashville - For the first time, BITZER now offers a new range of compressor units for use...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics