Boilers

E. H. Wachs at HRSG User's Group

E. H. Wachs will be exhibiting at the HRSG User's Group (Heat-Recovery Steam Generators) conference in Orlando, FL at the Caribe Royale Hotel March 9-11, 2015.Â-  Heat recovery steam generators utilize gas and steam turbines to create more power from the same fuel than a simple-plant cycle.  The excess heat from the gas turbine is directed to the nearby steam turbine, which...

Read More »
Heaters

Energy Savings on Process Heating Units

A leading supplier of performance polymers with products used in a wide range of applications, including adhesives, coatings, sealants, lubricants, etc. was increasing the production capabilities of one of its four polymer process lines.Â-  The increase in production capabilities would come from the upgrade of several process heating sources such as heat exchangers and dryers as well as...

Read More »
Hydraulic Oil Cooler Attachment enhances skid steer performance.
Oil Coolers

Hydraulic Oil Cooler Attachment enhances skid steer performance.

Attached to skid steer cab roof for minimal susceptibility to vibration, back pressure, debris, and impact damage, Cool Flow reduces risk of overheating in skid steers and hydraulically powered attachments in demanding applications and hot work environments. Thermostat-controlled fan automatically provides adequate cooling to system when needed. With 40 gpm max flow capacity, unit allows full...

Read More »
Vacuum Dryer uses load cells to optimize efficiency.
Air / Hot Air Dryers

Vacuum Dryer uses load cells to optimize efficiency.

By incorporating load cell technology, VBD™ Vacuum Resin Dryer provides plastics processors with capabilities for controlling and documenting use of material. Controlling resin level in vacuum chamber and retention hopper, load cells operate on loss-in-weight basis, achieving ±0.5% accuracy and providing real-time data on material throughput that is unaffected by variations in bulk...

Read More »
Slat Type Conveyor Oven for Drying Steel Parts
Ovens

Slat Type Conveyor Oven for Drying Steel Parts

•Ã‚- Ã‚ Â  Parts: pipe nipples •Ã‚ Â Â  Process: cure adhesive •Ã‚ Â Â  Electrically heated slat type conveyor drying oven •Ã‚ Â Â  Maximum Operating Temperature: 200º F SPECIAL FEATURES •Ã‚ Â Â  Air Flow: Top-down airflow using high velocity engineered air nozzles...

Read More »
BTU Sells Two PYRAMAX(TM) 100A Units at IPC APEX EXPO Trade Show
Ovens

BTU Sells Two PYRAMAX(TM) 100A Units at IPC APEX EXPO Trade Show

NORTH BILLERICA, Mass.,Â- – BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing and alternative energy markets, has sold both of the PYRAMAX™ show units on display at the IPC APEX EXPO in San Diego. The units were sold to ULTIMACHINE in South Pittsburg, TN, and Progressive Dynamics, Inc. in Marshall, MI. Paul Lancaster,...

Read More »
Ovens

Two-Compartment 850°F Universal Style Oven from Grieve

No. 979 is a 850ºF (454ºC), electrically-heated, universal style oven from Grieve, currently used for various machine shop heat treating operations  at the customer's facility.  Workspace dimensions of this oven measure 36" W x 36" D x 36" H in each of the two compartments.  24 kW (12kW per zone) are installed in Incoloy-sheathed tubular elements to heat the dual oven chambers, while a...

Read More »
Heaters

UL 508A Compliant Heaters Being Offered from DBK USA

Safety is a critical feature for electrical components, and in the past, there were no written guidelines from the NEC to the electrical inspector that ensured electrical safety for control panels. The NEC came up with a new installation code, Article 409, which became effective January 1, 2005. In this new article, it requires that industrial control panels must be marked with a short circuit...

Read More »
Centorr Vaccum Industries Sells Two High-Temperature Furnaces for Aluminum Nitride Production
Furnaces

Centorr Vaccum Industries Sells Two High-Temperature Furnaces for Aluminum Nitride Production

Nashua, NH – Centorr Vacuum Industries announced it has shipped orders for two high-temperature sintering furnaces for 2015 delivery to a leading firm in the production of AlN substrates for the LED market in China. The designs include CVI’s 2 cu ft graphite furnace for AlN sintering and a refractory metal furnace rated to 1850C for a secondary heating process. These new furnaces build on the...

Read More »
5ME and Okuma Join Forces to Demonstrate the Advantages of Aerospace Part Processing via Cryogenic Machining
CMM Machinery

5ME and Okuma Join Forces to Demonstrate the Advantages of Aerospace Part Processing via Cryogenic Machining

Two test facilities – in Michigan and North Carolina – invite aerospace manufacturers to present real-world challenges and leverage the advantages of cryogenic machining technology for production applications. 5ME and Okuma America have joined forces to demonstrate the advantages of cryogenic machining, including faster processing, longer tool life, increased part quality and lower...

Read More »

All Topics