Textile Cutters and Cutting Machinery

Sonobond Ultrasonics Will Exhibit Its Environmentally-Friendly, Cost-Effective Assembly Machines at Techtextil North America 2009 in Las Vegas
Textile Cutters and Cutting Machinery

Sonobond Ultrasonics Will Exhibit Its Environmentally-Friendly, Cost-Effective Assembly Machines at Techtextil North America 2009 in Las Vegas

The SeamMaster(TM) High Profile Ultrasonic Bonder and the handheld SureCut(TM) HC35 Cutter/Sealer are ideal for nonwoven and synthetic fabric applications. Both units will be on display at Booth #347 in the Sands Expo and Convention Center, April 21-23. WEST CHESTER, Pennsylvania, March 19, 2009-Sonobond Ultrasonics announced today that it will be demonstrating some of its ultrasonic assembly...

Read More »
Sonobond Ultrasonics Will Exhibit Its Environmentally-Friendly, Cost-Effective Assembly Machines at Techtextil North America 2009 in Las Vegas
Textile Cutters and Cutting Machinery

Sonobond Ultrasonics Will Exhibit Its Environmentally-Friendly, Cost-Effective Assembly Machines at Techtextil North America 2009 in Las Vegas

The SeamMaster(TM) High Profile Ultrasonic Bonder and the handheld SureCut(TM) HC35 Cutter/Sealer are ideal for nonwoven and synthetic fabric applications. Both units will be on display at Booth #347 in the Sands Expo and Convention Center, April 21-23. WEST CHESTER, Pennsylvania, March 19, 2009-Sonobond Ultrasonics announced today that it will be demonstrating some of its ultrasonic assembly...

Read More »
Textile Cutters and Cutting Machinery

Kuris Spreading And Cutting Technology News

The Exclusive North American Distributor QUEST CAD/CAM announces the release of two new KURIS system for the cutting room". The TexCut C 3030 compact cutter and the MS 100 MULTI-SPREADING MACHINE. According to KURIS, the TexCut C 3030 multi-ply cutter is developed for fine cutting of textile wovens, warp knitted and circular knitted fabrics, technical textile and special materials, and is...

Read More »
Textile Cutters and Cutting Machinery

Kuris Spreading And Cutting Technology News

The Exclusive North American Distributor QUEST CAD/CAM announces the release of two new KURIS system for the cutting room". The TexCut C 3030 compact cutter and the MS 100 MULTI-SPREADING MACHINE. According to KURIS, the TexCut C 3030 multi-ply cutter is developed for fine cutting of textile wovens, warp knitted and circular knitted fabrics, technical textile and special materials, and is...

Read More »
Textile Cutters and Cutting Machinery

Electronic Thermocutter weighs 11-½ oz.

With transformer replaced by high-tech electronics, AZTC-20 electronic thermocutter cuts synthetic fabrics, plastic tubes, fiber optics, foam and similar materials that tend to crimp, serrate or unravel when cold cutters are used. Temperature in unit is controlled from zero to 1050-ºF, while electrical current control switch allows selection of large blades. Cutting foot accessory lifts...

Read More »
Textile Cutters and Cutting Machinery

Electronic Thermocutter weighs 11--½ oz.

With transformer replaced by high-tech electronics, AZTC-20 electronic thermocutter cuts synthetic fabrics, plastic tubes, fiber optics, foam and similar materials that tend to crimp, serrate or unravel when cold cutters are used. Temperature in unit is controlled from zero to 1050Â-ºF, while electrical current control switch allows selection of large blades. Cutting foot accessory lifts...

Read More »
Multi Material Cutter delivers 600 lb of cutting force.
Textile Cutters and Cutting Machinery

Multi Material Cutter delivers 600 lb of cutting force.

Microprocessor-controlled MMC200 cuts round or flat material up to 3.94 in. wide and 5/8 in. thick and can be programmed to cut any length (in. or mm), with 1% or better tolerance. It is also programmable for up to 99 batches and 10 fixed feed rates. MMC200 is rated to cut up to 7,592, 2-in. pieces/hr through makerials such as copper wire and cable, silver solder, power cords, cellophane,...

Read More »
Multi Material Cutter delivers 600 lb of cutting force.
Textile Cutters and Cutting Machinery

Multi Material Cutter delivers 600 lb of cutting force.

Microprocessor-controlled MMC200 cuts round or flat material up to 3.94 in. wide and 5/8 in. thick and can be programmed to cut any length (in. or mm), with 1% or better tolerance. It is also programmable for up to 99 batches and 10 fixed feed rates. MMC200 is rated to cut up to 7,592, 2-in. pieces/hr through makerials such as copper wire and cable, silver solder, power cords, cellophane,...

Read More »
Textile Cutters and Cutting Machinery

Conveyorized Cutters target apparel and flexible materials.

Supplied with CutWorks-® software for full automation, single-ply GERBERcutter® Models DCS3600/3600L include TargetVision digital camera technology for capturing detailed images of materials placed on cutting table. AutoMat System, which addresses requirements of specialized mat industry, uses scanner technology that recognizes where mat's carpet and rubber border meet. With longer cut...

Read More »
Textile Cutters and Cutting Machinery

Conveyorized Cutters target apparel and flexible materials.

Supplied with CutWorksÂ-® software for full automation, single-ply GERBERcutter® Models DCS3600/3600L include TargetVision digital camera technology for capturing detailed images of materials placed on cutting table. AutoMat System, which addresses requirements of specialized mat industry, uses scanner technology that recognizes where mat's carpet and rubber border meet. With longer...

Read More »

All Topics