Watt Hour Meters feature DIN rail-mount design.
Offered in single-, 2-, or 3-phase format, DIN Rail Mounted kWh Meters have fully electronic design. Maintenance- and calibration-free meters have terminal covers that provide tamper-resistant solution for sub-metering applications. With operational voltage ranges of 120/240 V, 208/120 V, and 480/277 V, products can withstand overvoltage of 600 V for 48 hr and have max rated current of 60 A....
Read More »
X-Ray Metrology Tool measures thickness from 1 nm to 10 -µm.
BedeMetrix(TM)-F delivers non-destructive film thickness measurement on patterned wafers through combined x-ray reflectivity and x-ray fluorescence. Small spot x-ray optics enable measurement on test pads and in scribe lines down to 100 Ã-µm for XRR and 30 Ã-µm for XRF. BedeMetrix(TM)-F is available in 3 primary configurations for strained silicon, metal film structure determination, and...
Read More »
Waterproof Meter measures pH and conductivity.
Equipped with non-glass pH probe and solid-state conductivity electrode, NEMA 4X-rated Model IQ170 measures pH, mV, temperature, ORP, conductivity, TDS, and salinity. It includes LCD display with LED backlight, automatic temperature compensation, automatic pH buffer recognition, automatic conductivity cell constant recognition with auto-ranging, and up to 3-point pH calibration. Stainless steel...
Read More »
Laser Meter includes PC host interface.
Featuring analog output, FieldMaxII(TM) is available in power-only, energy-only, or power and energy configurations. Thermopile, pyroelectric, and semiconductor sensors enable unit to measure UV, visible, and IR laser output from nW to kW range, and to work with CW and pulsed lasers with repetition rates up to 300 Hz. LabVIEW Instrument driver and ActiveX DLL Server component facilitate...
Read More »
A Definitive Guide to Air Gaps in Magnetic Separation Equipment
This guide discusses how air gaps affect magnetic separation applications.
Read More »
Pocket-Sized Meter indicates resistance and resistivity.
Ohm-Stat(TM) RT-500 features built-in parallel electrodes on bottom of case to measure resistance to ground and surface resistivity. External banana jacks accept two 5 lb, 2.5 in. electrodes, which measure RTT, RTG, and volume resistance. RTT probes test small, difficult-to-reach surfaces, chairs, and smocks. With press of button, unit automatically measures 10 V or 100 constant V, depending on...
Read More »
Hour Meter displays readings with no tenths.
DC Hour Meter, Model EK-200-10SS-NT allows user to monitor hours of operation to nearest hour, with no tenths, eliminating potential for errors caused by misreading tenths as whole hours. Standard unit reads to 99,999 hours and has non-reset security. Operating from 8-32 Vdc, meter includes all steel SAE bezel bracket mount, stainless steel bezel, and spade terminals.
Read More »Portable WLAN Power Analyzer has handheld design.
Able to take 802.11b/a/g Wi-Fi frequency and power measurements, Caterpillar(TM) sweeping analyzer features built-in backlit display and keypad menu navigation. Receiver attaches directly to Access Point, bridger, or Network Interface Card via included SMA antenna connection kit. Triggering capability enables unit to measure 2.4 and 5 GHz frequency bands to verify and analyze output power levels,...
Read More »
Revenue Meter includes 10 Mb on-board memory.
Socket-mount IONÃ-® 8600 energy and power quality meter captures and stores transient disturbances, sags, swells, waveforms, and load trends. Providing up to 5 simultaneous communication ports, including web-ready Ethernet ports, unit offers industry-standard protocols for data sharing between utilities, customers, and network operators. It can interface to standard SCADA and billing systems,...
Read More »
Energy Detectors work with high rep rate lasers.
Compatible with handheld displays, PD10-pJ and PD10 Photodiode Energy Heads measure up to 10,000 Hz on low energy, high rep rate lasers. Former has pulse energy measurements of 10 pJ to 200 nJ and energy scales of 200 nJ to 200 pJ, while latter has pulse energy measurements of 1 nJ to 20 Ã-µJ and energy scales of 20 Ã-µJ to 20 nJ. Both feature spectral response from 0.19-1.1 Ã-µm,...
Read More »
Wireless Energy Meter helps control energy costs.
Providing means to sub-meter tenants, departments, or loads, socket-mount IONÃ-® 6300 forms wireless network that reports energy consumption for individual and aggregate billing purposes. Each tenant is equipped with wireless meter, and ION Wireless Gateway, installed nearby, receives radio signals from up to 100 m. Building managers can monitor energy usage in real-time or logged data for...
Read More »
More performance and functionality for Sinumerik 828D CNC
Siemens new SINUMERIK 828D ADVANCED, SINUMERIK 828D and SINUMERIK 828D BASIC sets the standard for productivity enhancements of turning and milling operations on standardized machines and simplify the automation of grinding machines. See our video to learn all about it.
Read More »
