New Converters Products

Converter provides serial-ID functionality.

Small Form-Factor Pluggable (SFP) to HSSDC-2 Converter transmits and receives data between HSSDC-2 copper interface and SFP port. It provides bi-directional serial communications up to 2.5 Gbps. Hot-swappable converter features nickel-plated, die-cast housing with pull-to-release bail latch actuator. Spring-loaded clips ensure proper grounding when used with EMI Cage.

USB Serial Converters suit scientific laboratory research.

Serial converter models NI USB-232 and NI USB-485 allow engineers and scientists to connect to existing serial instruments using USB technology. NI USB-232 converters use RS-232 Serial protocol, while NI USB-485 models use RS-485 or RS-422 serial protocols. Both converters are available in 2- or 4-port configurations. Data throughput rates are rated to 230.4 kb/s (NI USB-232) and 460.8 kb/s (NI...

Analog-to-Digital Converter employs SAR architecture.

Model MCP3221, 12-bit converter offers I2C(TM) interface in SOT-23 package. Its design permits operation with typical standby and active currents of 5 nA and 175 micro-amps respectively. Fast mode (400 kHz clock rate) enables sampling rates to 22.3 kilo-samples per second (ksps). Suited for remote applications, unit has single supply operation and operates over range of 2.7 to 5.5 V and offers...

Frequency Converter provides clean power.

Model P1352 with direct digital synthesizer delivers 1,350 VA of regulated ac power. Voltage fold back during overloads maintains undistorted waveforms. Converter is housed in 3.5 in. high bench top chassis that converts to rack mount. Unit provides adjustable output voltage of 0-135 or 0-270 Vrms over frequency range of 45-500 Hz with vacuum fluorescent display and RS232 port. Push button...

Commercial Kitchen Ventilation Systems

If you can't stand the heat, don't get out of the kitchen! Download this white paper and see how you can improve your commercial kitchen ventilation system.

Frequency Converter features SERCOS interface.

System200 REFUdrive comprises modular construction kit of drive and control components that use universal, open standards. SERCOS interface expands existing options for connection to Profibus DP, Interbus S, and CANopen. Output ratings from 1.5 to 600 kW allow decentralized drive structures with servo drives and frequency converters. REFUdrive meets class A standards for compatibility. Drive...

Synchro to DC Converter operates at 400 conversions/sec.

Miniature (1.5 cu. in) solid-state Series SD109 converts 3-phase synchro or 2-phase resolver inputs into sine and cosine outputs. Peak angular error is rated at Ã-

Converters require no external transformers.

PC104 Series consists of 3- and 4-channel PC/104 and compatible Synchro, Resolver, and LVDT/RVDT to digital converters employing type 2 ratiometric tracking converters. They accept any group of up to 4 individual, 3-wire Synchro, or 4-wire Resolver inputs, or 2-4 wire LVDT/RVDT inputs; over frequency range of 50 Hz to 10 kHz, and convert them into 10-16 bit words of natural binary data...

Catalytic Mufflers suit Nissan LPG-powered forklifts.

Built from corrosion resistant materials, NettÃ-® catalytic mufflers are direct-fit units. Their built-in, three-way emission control catalyst eliminates emissions of carbon monoxide (CO), nitrogen oxides (NOx), and propane exhaust gas odors. Incorporated emission control and noise attenuation components are included in one shell. Electronic air-to-fuel ratio controller is also available,...

PCI A/D Board captures data at 600 kHz per channel.

Series PCI-417 handles 16 analog input channels in parallel, with 12-bit A/D resolution. Non-stop streaming design collects gigabytes to memory or disk. Board has 32-bit wide on-board DMA PCI bus master that offloads host CPU. Features include 2 streaming 16-bit analog output D/A channels, 24 bit digital I/O, and local A/D FIFO memory up to 256 Ks to avoid WindowsÃ-® delays. Models available...

Converters offer 16-bit resolution and +/-.005 deg accuracy.

Synchro to Digital Converters are designed to convert 2-speed Synchro or Resolver inputs of 11.8 V, 26 V, 90 V 400 Hz, or 90 V 60 Hz into 16-bit parallel binary outputs respresenting angle. Speed ratios of 1 x 10, 1 x 18, 1 x 36, 1 x 8, 1 x 16, 1 x 64, and 1 x 128 are available. Converters track rates up to 1000 deg/sec. They have DC velocity output and built in test (BITE) with digital...

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.