Test Kits

Test Kits

Electrical Troubleshooting Kit aids in preventive maintenance.

Fluke 1587/ET Advanced Electrical Troubleshooting Kit includes insulation multimeter, current clamp, and infrared thermometer. Model 1587 true-rms digital multimeter provides insulation resistance testing up to 2 GW with 5 output voltages ranging from 50-1,000 V. Current Clamp Model i400 measures current from 1-400 A ac without breaking circuit, and Fluke 62 mini non-contact thermometer finds hot...

Read More »
Multimeter Kit provides automotive diagnostic package.
Test Kits

Multimeter Kit provides automotive diagnostic package.

Combining 88V Automotive Multimeter and Raytek MiniTemp MT6 Infrared Thermometer, dust- and splash-resistant 88V-IR Kit includes accessories for troubleshooting and diagnosing problems on conventional or hybrid vehicles. Multimeter includes magnetic hanger, and functions such as peak min/max recording, conductance, duty cycle, frequency, and pulse width. Infrared thermometer spots cooling faults,...

Read More »
Test Kits

Test Kit assures fieldbus device interoperability.

Interoperability Test Kit v4.61 verifies functionality of device with FOUNDATION fieldbus Function Block specifications. Suited for troubleshooting and debugging devices, kit includes test engine, communication stack, and Function Block interface card. Test engine executes over 400 test cases that exercise device implementation. Tester also includes conformance test procedure for physical layer,...

Read More »
Electrical Kit meets contractor's everyday needs.
Test Kits

Electrical Kit meets contractor's everyday needs.

Electrical Kit TK-30 is comprised of DM-20 manual ranging multimeter, GT-11 voltage detector, and GT-10 polarity cube. Model DM-20 measures current of small electronic circuits, ac/dc voltage, dc amperage, resistance, and also checks 9 V batteries. Offering non-contact voltage detection, Model GT-11 provides LED and audible alarm if voltage is present. Model GT-10 troubleshoots 120 Vac grounded...

Read More »
Test Kits

Starter Kit aids in MCU development and programming.

To facilitate development of and experimentation with PICÂ-® microcontrollers, PICkit(TM) 2 Starter Kit connects to PC via full-speed USB 2.0 and allows for firmware upgradeability. It requires no additional power supply for programmer or target application board, and included set of tutorials lets users learn at their own pace. Form factor requires minimal workbench space and can plug into...

Read More »
CANopen Starter Kit offers educational motion control tool.
Test Kits

CANopen Starter Kit offers educational motion control tool.

CAN-STEPCON (CANopen) starter kit enables PC users to gain experience with CANopen motion control in stepper motor applications. It contains CANopen stepper motor controller, CAN-STEPCON-1H; I/O wiring; 100-240 Vac/47-62 Hz power supply; and CAN network. Included CAN-USB-Mini interface module, with bit rate up to 1 Mbps, acts as CANopen Manager, while CAN-STEPCON-1H acts as slave. Provided with...

Read More »
Test Kits

Development Kits aid Nios II, DSP, and PCI design process.

Based on Cyclone(TM) II FPGAs, development kits facilitate prototyping of NiosÂ-® II embedded processor, DSP, and PCI designs. Each kit includes Cyclone II development board, CD with documentation and reference designs, and power supply as well as necessary cables, QuartusÂ-® II design software, and suite of interface IP cores. Nios II Development Kit provides everything needed for...

Read More »
Sealant Detection Kit prevents damage to recovery equipment.
Test Kits

Sealant Detection Kit prevents damage to recovery equipment.

Suited for both R134A and R12 systems, QuickDetect A/C Sealant Detection Kit includes A/C coupler, hose, test cartridge, and flow meter. When connected to mobile A/C system, it mimics A/C leak. If sealant is present in system, it will quickly solidify in disposable test cartridge and cause flow meter to show no-flow. Except for test cartridges, all Quick Detect components are reusable. Additional...

Read More »
Multi-Parameter Test Kit is fiber-optic based.
Test Kits

Multi-Parameter Test Kit is fiber-optic based.

Dynamic Multi-Parameter Test Kit comes with BUS Commander Software and variety of Fabry-Perot fiber optic sensors, including temperature, pressure, strain, and refractive index sensors. BUS signal conditioner and acquisition system is configured with 2 channels, offering simultaneous reading with sampling rate to 1,000 Hz. System is upgradeable to up 8 channels per chassis, can be cascaded, and...

Read More »
Development Kit works with high-voltage DACs.
Test Kits

Development Kit works with high-voltage DACs.

HVDAC DevKit, model UVK-HVDAC200-4, provides plug-and-play platform for evaluation and prototype development using HVDAC200-4 quad, 9-bit, serially configurable voltage/current DAC with outputs of up to 200 V. Kit comes with WindowsÂ-®-based demo program and consists of Goal VERSA MIX 8051 MCU, onboard voltage reference, and 2 adjustment potentiometers. Kit also offers over-temperature and...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics