New T5MV Coaxial Termination with 0.5 Watts Maximum Power
Operating temperature range is -85°C to +125°C and impedance is 50 ±1 Ohm. Measure 0.82 inches in length and 0.36 inches in diameter and connector is 1.85mm male. Designed for radio, antenna and many types of RF components .
Read More »
New TL10/NEX10M/LP Termination Load is Suitable for Small Cell Wireless Applications
Designed to fit in tight spaces for testing or terminating ports on Nokia radio unit head units. Offers 10 W load terminating with NEX10 male connector. Meets Nokia standard ITE-7523 standards and compliant to test radio head or terminating unused ports.
Read More »
Pasternack's New Quick Connect RF Loads Support Frequency Ranging from DC to 40 GHz
Quick Connect RF Loads from Pasternack are available with QMA, QN, 4.3-10, SMP, SMP-M and BMA connectors. Units offer VSWR as low as 1.1:1 and input power up to 2W maximum and are suitable for applications DAS systems, base stations, antennas and test instrumentation. QMA model is made from tri-metal-plated brass, SMP with gold-plated brass, SMP-M from gold-plated beryllium copper and 4.3-10...
Read More »
Ultra Broadband Chip Termination suits microwave applications.
Measuring 1.016 x 1.016 mm, Model TV0404FA-50R0JN-91 features typical return loss of 18.5 dB or better over DC to 60 GHz bandwidth. Chip is constructed of thick film on alumina with wire-bondable input pad and epoxy or solderable ground. Rated at 250 mW on 100-
Read More »Are Starrco Modular Systems Right for Your Application?
Prefabricated construction is a type of construction method that involves manufacturing building components off-site or in a controlled environment
Read More »
RF Termination (500 W) has DC to 4.5 GHz bandwidth range.
Occupying 1.25 x 1.00 in. footprint, flange mount T50R0-500-15X dissipates 500 W with- return loss of 20 dB or better return loss from DC to 2.5 GHz and 17 dB to 4.5 GHz. This RoHS-compliant thick film on Beryllium Oxide (BeO) termination, which- has internally matched circuit architecture, features- silver-plated copper flange and input tab. Along with 500W power rating, features include...
Read More »
RF Termination incorporates 50 ohm resistor element.
Featuring overall footprint of 2.25 x 1.25 in., flange-mount Model T50R0-1750-1X dissipates 1,750 W with return loss of 20 dB or better over DC to 1 GHz bandwidth. Thick film on Beryllium Oxide termination has silver-plated copper flange and input tabs. RoHS-compliant device is suited for critical applications, including mobile radio base stations, broadcast, and phased-array radar.
Read More »
RF Termination (1 kW) serves basestation, radar applications.
With internally matched circuit architecture, T50R0-1000-6X thick film on Beryllium Oxide (BeO)- termination offers 20 dB or better return loss from DC to 2.5 GHz (17 dB to 4.5 GHz). This RoHS-compliant RF termination features silver-plated copper flange and input tab and overall footprint- of 2.25 x 1 in. Along with 1,000 W rating, features include stable 50 Ω resistor elements. Applications...
Read More »
Electronic Load features 300 W power rating.
With input rating of 0–15 A and 0–500 V, Model EL9712B offers 6 modes of operation and dual range 16-bit resolution measurements. Any current carrying component may be tested and wide range of dynamic load conditions may be simulated including solar cell and fuel cell loading, and LED testing. Fully protected against OP, OC, OV, OT, and reverse polarity, electronic load offers 999...
Read More »
Medium and High Power RF Loads operate to 18 GHz.
Offered in 25, 50, and 100 W models, RF Loads are available with many connector configurations, including male and female versions of SMA, N, TNC, and 7/16 DIN. Models rated to 25 and 50 W operate to 18 GHz, with exception of 7/16 DIN version, which is rated to 8 GHz. All 100 W loads also operate to 8 GHz. Manufactured with black anodized aluminum cooling fins for convection cooling, coaxial...
Read More »
Kepco Offers Enhancements to Its Electronic Loads
Kepco is pleased to announce several product enhancements to its popular EL series of 1 to 5 Kilowatt single and dual channel electronic loads: CE MARK for LVD and EMC directives Increased current capability of all low voltage models up to 800 Amps at 5 Kilowatts Transient capability, 50 microseconds to 10 seconds Repeating transients, repeating every 100 microseconds to 10 seconds from 2 to...
Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.
Read More »
