Terminal Blocks

Terminal Blocks

Plug and Header Terminal Blocks feature 3.5 mm pin pitch.

Rated at 10 A at 300 V, DGPB series 2-piece terminal blocks feature DGPBH120V8 mounting header and DGBPP108 modular mating plug, each offered in 2-24 positions. DGPBP108 plugs accept wire range of 16-28 AWG. With operating temperature range of -30 to +120Â-ºC, RoHS compliant blocks feature brass contact material, polyamide 6.6 (UL94V-0) housing, and are available in blue or black as standard...

Read More »
Terminal Blocks

Snap Cover Terminal Blocks promote electrical safety.

Featuring integrated, permanently attached, snap-on terminal safety covers, series C34/C44 avoid loss or misplacement of covers and provide finger tip safety in high-power situations. Modular products, offered in 2-24 pole configurations, feature tin-plated brass terminals in 6 pin-out configurations. While C-34 Series is current rated at 10 A @ 300 Vac with 7.62 mm pitch, C-44 Series is rated at...

Read More »
Terminal Blocks

I/O Accessories withstand harsh, industrial environments.

Series ZK1020 IP-Link Bridge Connectors and Series ZS5300 I/O Mounting Rails are suited for applications that require IP67-rated I/O terminals mounted outside of cabinet and directly on machines. Connectors are used for high-density, side-by-side Fieldbus Box I/O mounting where modules are 0-5 mm apart. Made of 1.5 mm thick stainless steel with pre-cut M3 threads to attach I/O modules, Mounting...

Read More »
Terminal Blocks

Terminal Blocks suit wire gauges up to 14 AWG.

Measuring 6.2 mm wide, quick connection IDC Series QTC 2.5 accepts 20-14 AWG conductors and offers current carrying capacity of 15 A at 600 V. When cable is inserted into contact, soft pivot is actuated and gas-tight, vibration-proof termination is made. Wiring installation requires only standard screwdriver.

Read More »
Terminal Blocks

Terminal Block suits space-restricted PCBs.

Offering voltage ratings up to 300 V and current ratings up to 8 A, double-level Model MRT 33 allows for diverse wiring options. Miniature unit accepts either 3.81 or 3.5 mm plugs, which can be loaded vertically or horizontally on block. UL recognized device is made from UL 94 V0 plastic with tin-plated solder pin that ensures optimal connection to board.

Read More »
I/O Distributors offer class IP 68 protection.
Terminal Blocks

I/O Distributors offer class IP 68 protection.

Available with 4, 6, or 8 M12 ports, ECO SAI Blocks are designed with pluggable connection hood for bus lines. In case of defective cable, only cable needs to be exchanged, not entire distributor. Screw connection technology connects bus line across terminal range of 0.1-1.5 mmÂ-². Captive fixing screws are steel with slotted and cross-recessed heads. Housings are plastic Pocan, a...

Read More »
Terminal Blocks feature spring loaded connections.
Terminal Blocks

Terminal Blocks feature spring loaded connections.

With housing made of Polyamide PA 6.6 UL94V-O, CCF Side Stackable Female Terminal Blocks are offered with pole pitches of 5.0, 5.08, 10.0 and 10.16 mm at 300 and 600 V, respectively, at 12 A. They come with 2-18 pole positions and accept wire size of 12-24 AWG. Furnished in green as standard color, CCF Series is designed to mate with CIM series male connectors. Spring loaded connections negate...

Read More »
Pluggable Terminal Blocks provide 85 A/circuit at 600 V.
Terminal Blocks

Pluggable Terminal Blocks provide 85 A/circuit at 600 V.

Available in horizontal plug and right-angle header versions, EuroMax(TM) interconnect system offers redundant parallel contact system. All hardware components are copper-based alloys to optimize thermal compatibility. Manufactured with high-temperature housing material, system withstands lengthy solder pre-heat conditions. EuroMax is available in 2-10 circuits, and up to 8 circuits for versions...

Read More »
Terminal Blocks utilize pressure spring connection system.
Terminal Blocks

Terminal Blocks utilize pressure spring connection system.

Utilizing stainless steel leaf spring clamp connection, FRK Series includes Feed Through and Ground Terminal Blocks in 2-, 3-, and 4-clamp configurations. System requires no tools and allows fingertip wire installation. Able to terminate solid wire or stranded wire with ferrule, vibration- and corrosion-resistant system employs copper alloy conducting element. Block widths of 4, 5, and 6 mm...

Read More »
Terminal Blocks

Terminal Blocks facilitate power distribution.

Series POLM consists of single or multiple busbars with wire screw connections. Current handling capacity ranges from 63-100, 125, and 160 A. Each busbar accepts 7-15 wires, depending on model. Made from UL 94V0 polycarbonate, fully insulated housing covers can be removed for access to wiring. Modules can be mounted onto standard DIN rails or directly onto panel. Individual busbars can be removed...

Read More »

All Topics