Terminal Blocks

Plug Connectors offer choice of connection technologies.
Terminal Blocks

Plug Connectors offer choice of connection technologies.

Available in screw, spring, or IDC (insulation displacement connection) technologies, COMBI plug connectors plug into DIN-mounted pluggable terminal blocks, and use same plug-in zones for all basic blocks. Standard plugs (UP, SP, QP) feature wire exit on top, while plugs with screw and spring-cage technology (UPBV, SPV) have side wire exit. Units are available in pre-assembled position sizes or...

Read More »
Terminal Blocks accept 4 plug-in connectors.
Terminal Blocks

Terminal Blocks accept 4 plug-in connectors.

Included in WeiCoS (Weidmuller Connection System) terminal block series, ZT4/2AN/1 and ZTPE4/2AN/1 are 4 mmÂ-² models that carry 600 V/32 A electrical rating and handle up to 10 AWG conductors. They combine terminal block and plug-in connection technology, resulting in modular, functionally flexible, and manufacturer-independent wiring system. Externally-tensioned contact and locking element...

Read More »
Terminal Blocks suit standard wire termination applications.
Terminal Blocks

Terminal Blocks suit standard wire termination applications.

Ring-lug terminal blocks offer hinged shroud for safe wiring, and finger-safe design to eliminate need for standard/customized dust cover. Used together, WTL 6/4 FF (slide link terminal) and WTD 6/4 FF (standard feed-through) terminal can be configured to create multiple phase testing configurations for current transformer applications. Disconnect test terminals feature combi foot design for...

Read More »
Distribution Blocks are IP 20 UL® finger safe.
Terminal Blocks

Distribution Blocks are IP 20 UL® finger safe.

Available with hinged/removable screw-retaining transparent covers that allow visual inspection of wire and confirmation of connection, single-pole ERIFLEX® distribution blocks have more than 95% fill ratio. Tinned copper blocks clip onto DIN Rail or mount to panels with screws. By keeping only one input, blocks can be supplied in parallel using jumper wire. They can be ganged for unlimited...

Read More »
Terminal Blocks

Terminal Blocks increase wiring density.

Featuring 4 conductor connection, UTTB 4 and UTTB 2.5 Double-Level Terminal Blocks connect conductor cross-section ranges of 26-10 AWG and 26-12 AWG, respectively. Universal FBS plug-in bridge system allows cross connection of neighboring feed-through terminal blocks. Same shape ground blocks feature snap-on foot, while double bridge shaft allows individual chain bridging by means of plug-in...

Read More »
High Current Terminal Blocks accept aluminum and copper wire.
Terminal Blocks

High Current Terminal Blocks accept aluminum and copper wire.

ERTB Terminal Blocks offer secure points of connection and transmission for incoming power line service to electrical equipment. Post-to-clamp style unitized blocks mount to any cabinet/housing attachment point. Single row, 3-wire pole design accommodates line voltage on 1 or 2 poles, handling neutral and ground wires on remaining poles. Blocks are made of impact-resistant polycarbonate with...

Read More »
Terminal Blocks feature snap-on plastic safety covers.
Terminal Blocks

Terminal Blocks feature snap-on plastic safety covers.

Accepting wire sizes from 10-22 AWG, ST Series consists of several sub series with pole pitches from 7.62-13.0 mm and voltage range of 250-600 V at 10-25 A. Safety covers assure users of additional protection against shorts while preventing accidental terminal contact by assemblers and repairmen. Housing is polyamide 66 UL 94V-O with black as standard color. Wide variety of terminal mounting...

Read More »
Terminal Blocks

RoHS Compliant Filtered Terminal Blocks

Fairview, PA - March 20, 2006 - Spectrum Control, Inc. now offers it's complete line of Filtered Terminal Blocks in RoHS compliant models. Spectrum's RoHS compliant terminal blocks are available in Barrier Strip or PCB models. The rugged construction of these blocks protects the filter element from damage that is common during changes in field wiring. Every part is 100% tested for key parameters....

Read More »
Push-In Terminal Blocks utilize spring pressure.
Terminal Blocks

Push-In Terminal Blocks utilize spring pressure.

Covering cross section of 2.5-16 mmÂ-², Models PDU 2.5/4, PDU 6/10, and PDU 16 have wiring ranges of 20-10, 14-8, and 14-4 AWG, respectively. Solid core wires, once stripped of insulation, are inserted into terminal point until they hit stop; no tools are required to make connection. Push-in direct connection technology ensures vibration-resistant and gas-tight fit. Made from Wemid...

Read More »
Terminal Blocks facilitate installation and wiring.
Terminal Blocks

Terminal Blocks facilitate installation and wiring.

Offering complete range of connections, Alpha Fix Terminal Blocks are designed for installation in switching cabinets or control cabinets on 35 mm rail in accordance with DIN EN 60715. Series includes integrated screwless terminal system with spring-loaded terminals, combi-connector terminals, and plug-in or insulation displacement terminals. It also provides necessary links, accessories, and...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers