Terminal Blocks

Opto-Isolated Digital I/O Signal Conditioning Boards for Small Form Factor Embedded Computer Systems
Terminal Blocks

Opto-Isolated Digital I/O Signal Conditioning Boards for Small Form Factor Embedded Computer Systems

Arlington, TX - WinSystems announced two new optically isolated signal conditioning and termination boards for OEM computer system designers. The ISM-TRM-ISO-IN provides 24 lines of optically isolated and digitally debounced inputs to provide easy connections and signal conditioning from field wiring. The ISM-TRM-ISO-OUT provides 24 lines of optically isolated outputs. To interface with field...

Read More »
Opto-Isolated Digital I/O Signal Conditioning Boards for Small Form Factor Embedded Computer Systems
Terminal Blocks

Opto-Isolated Digital I/O Signal Conditioning Boards for Small Form Factor Embedded Computer Systems

Arlington, TX - WinSystems announced two new optically isolated signal conditioning and termination boards for OEM computer system designers. The ISM-TRM-ISO-IN provides 24 lines of optically isolated and digitally debounced inputs to provide easy connections and signal conditioning from field wiring. The ISM-TRM-ISO-OUT provides 24 lines of optically isolated outputs. To interface with field...

Read More »
Knife Disconnect Terminal Blocks enable safe circuit testing.
Terminal Blocks

Knife Disconnect Terminal Blocks enable safe circuit testing.

Used to open up circuit while inserting meter for testing, UL-approved ASI knife disconnect terminal blocks allow control loops and current transformer circuits to be inspected under zero voltage conditions. Knife disconnect is color-coded orange to provide visual indication of position. Suited for use in measurement, regulation, and control systems, models ASIUK5MTPP and ASIUDK4MTKPP are rated...

Read More »
Knife Disconnect Terminal Blocks enable safe circuit testing.
Terminal Blocks

Knife Disconnect Terminal Blocks enable safe circuit testing.

Used to open up circuit while inserting meter for testing, UL-approved ASI knife disconnect terminal blocks allow control loops and current transformer circuits to be inspected under zero voltage conditions. Knife disconnect is color-coded orange to provide visual indication of position. Suited for use in measurement, regulation, and control systems, models ASIUK5MTPP and ASIUDK4MTKPP are rated...

Read More »
WAGO TOPJOB®S Terminal Fuse Blocks with 3 Jumper Slots
Terminal Blocks

WAGO TOPJOB®S Terminal Fuse Blocks with 3 Jumper Slots

GERMANTOWN, WI - Select WAGO Corporation 2002 Series TOPJOB-® S Terminal Blocks now carry three jumper slots for greater control cabinet flexibility. New DIN-rail Disconnect/Test with Mechanical Interlock, Mini-Automotive Blade-style Fuse and Fuse Disconnect with Pivoting Holder (5x20mm) accommodate one output and two input potential commoning. This provides convenient in-circuit current testing...

Read More »
WAGO TOPJOB-®S Terminal Fuse Blocks with 3 Jumper Slots
Terminal Blocks

WAGO TOPJOB-®S Terminal Fuse Blocks with 3 Jumper Slots

GERMANTOWN, WI - Select WAGO Corporation 2002 Series TOPJOBÂ-® S Terminal Blocks now carry three jumper slots for greater control cabinet flexibility. New DIN-rail Disconnect/Test with Mechanical Interlock, Mini-Automotive Blade-style Fuse and Fuse Disconnect with Pivoting Holder (5x20mm) accommodate one output and two input potential commoning. This provides convenient in-circuit current...

Read More »
Terminal Blocks isolate internal circuits from interference.
Terminal Blocks

Terminal Blocks isolate internal circuits from interference.

With MPT Panel Feed Through Terminal Blocks, field wiring is outside enclosure and product circuits are inside shielded cabinet or box, enabling designers to isolate circuits from interference. Ten modules are available with ratings from 24 A/450 V to 150 A/1,000 V and pitches from 7.5-18.8 mm. Variety of push-on tab, solder, and screw terminations are offered. Mounting to panels is accomplished...

Read More »
Terminal Blocks isolate internal circuits from interference.
Terminal Blocks

Terminal Blocks isolate internal circuits from interference.

With MPT Panel Feed Through Terminal Blocks, field wiring is outside enclosure and product circuits are inside shielded cabinet or box, enabling designers to isolate circuits from interference. Ten modules are available with ratings from 24 A/450 V to 150 A/1,000 V and pitches from 7.5-18.8 mm. Variety of push-on tab, solder, and screw terminations are offered. Mounting to panels is accomplished...

Read More »
Terminal Blocks available with optional shorting kits.
Terminal Blocks

Terminal Blocks available with optional shorting kits.

Available for RBO 5/RSC 5 modular feed-through terminals, Carrier 35-13 Kit and Carrier F-13 Kit provide short circuit capability for current transformer applications. Carrier 35-13 supports DIN rail-mounted terminals, while Carrier F-13 suits panel-mounted terminals. Both include 4 shorting screws, 1 bridging bar, 4 isolators, and 1 carrier to hold 4 screws when not in use. Offered in 9 and 13...

Read More »
Terminal Blocks available with optional shorting kits.
Terminal Blocks

Terminal Blocks available with optional shorting kits.

Available for RBO 5/RSC 5 modular feed-through terminals, Carrier 35-13 Kit and Carrier F-13 Kit provide short circuit capability for current transformer applications. Carrier 35-13 supports DIN rail-mounted terminals, while Carrier F-13 suits panel-mounted terminals. Both include 4 shorting screws, 1 bridging bar, 4 isolators, and 1 carrier to hold 4 screws when not in use. Offered in 9 and 13...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics