Temperature Transmitters

Transmitter supports batch controller capabilities.
Temperature Transmitters

Transmitter supports batch controller capabilities.

Signet 9900 Transmitter (Generation II) supports multiple parameters, including flow, pH/ORP, conductivity/resistivity, salinity, temperature, pressure, level, and 4–20 mA signals, and batch systems. In addition to saving up to 10 batch sizes, capabilities include customizable batch names, entry of K-factors for each batch,Â- confirmation for preventing accidental batch...

Read More »
Low-Cost Temperature Transmitters Receive ATEX Certification for Use in Zone 2 Hazardous Locations
Temperature Transmitters

Low-Cost Temperature Transmitters Receive ATEX Certification for Use in Zone 2 Hazardous Locations

ST130 series head-mount transmitters with thermocouple or RTD inputs are now ATEX-approved for use in potentially explosive atmospheres with flammable gases present. Wixom, MI: Acromag's ST130 Series temperature transmitters recently received ATEX approval for use in explosive atmospheres. These thermocouple and RTD transmitters are USB-configured, loop-powered and provide a proportional 4-20mA...

Read More »
Air Quality Transmitters measure CO2, RH, and temperature.
Temperature Transmitters

Air Quality Transmitters measure CO2, RH, and temperature.

Combining CO2, RH, and temperature in one device, Series CDTR minimizes number of sensors mounted on wall or in duct. Transmitters use single-beam, dual-wavelength NDIR sensor to automatically correct measurement in both occupied and unoccupied buildings against light source aging effects. Universal outputs for both carbon dioxide and relative humidity allow users to select transmitter output to...

Read More »
Humidity/Temperature Transmitter operates in hazardous areas.
Temperature Transmitters

Humidity/Temperature Transmitter operates in hazardous areas.

Compliant with ATEX Directives for intrinsically safe equipment, Model EE300Ex can be employed in both hazardous and explosive gas and dust areas in zones 0/20. Sensor element ensures precise measurements in 0–100% RH and -40 to 180°C ranges, whileÂ- 2-part stainless steel housing facilitates installation and permits rapid replacement of measurement unit. Designed using 2-conductor...

Read More »
Temperature Transmitters

Humidity and Temperature Transmitters suit HVAC applications.

Operating with minimal maintenance, INTERCAP® Series HMDW80 includes basic transmitters for walls and ventilation ducts as well as IP65-classified transmitters for wash-down areas and other humid spaces. Series also contains transmitters that measure temperature only as well as transmitters with optional display. In addition to direct output parameters, units provide calculated humidity...

Read More »
Temperature Transmitters support head- and DIN rail-mounting.
Temperature Transmitters

Temperature Transmitters support head- and DIN rail-mounting.

Available for thermocouple Types J, K, or T and 3-wire RTD type Pt100, ProSense non-programmable transmittersÂ- provide linearized 2-wire 4–20 mA current loop output. Programmable models, compatible with variety of thermocouple and RTD types, feature linear resistance of 10–400 Ω and 10–2,000 Ω. Head-mount models are powered by 8–35 Vdc, while DIN rail-mount models are...

Read More »
Temperature Transmitters

Continuous Monitoring System connects to any existing network.

Using external or internal sensors, HUMICAP® HMT140 Wireless Humidity and Temperature TransmitterÂ- allows secure monitoring, alarming, and reporting of temperature, RH, CO2, differential pressure, contacts, and other critical parameters in Life Science applications. Two-channel IP65-rated system has temperature range of -20 to +60°C with display and -40°C to +60°C...

Read More »
Thermal Mass Flow Meter includes calibration validation feature.
Temperature Transmitters

Thermal Mass Flow Meter includes calibration validation feature.

Available on Model FT3 Thermal Mass Flow MeterÂ- and Temperature Transmitter, Zero CAL-CHECK™ Calibration Validation feature checks for build-up on sensor that could affect calibration, further validates zero stability of meter, and checks thermal conductivity repeatability of sensor. Zero CAL-CHECK™ must be performed at zero flow to ensure valid test result, and if it is initiated by...

Read More »
Temperature Transmitters offer DIN rail or head mounting.
Temperature Transmitters

Temperature Transmitters offer DIN rail or head mounting.

Available in configurations for RTD Pt100 or J, K, T, or E thermocouple inputs, Analog Temperature Transmitters provide linear loop powered 4–20 mA output.Â- Fixed range units can be DIN rail mounted or mounted into industry standard connection heads. Equipped with 20-turn potentiometers for fine adjustment of zero and span, transmitters are suited for industrial and sanitary markets...

Read More »
Temperature Transmitter has modular, programmable design.
Temperature Transmitters

Temperature Transmitter has modular, programmable design.

SIL2 safety-certified Rosemount® 644 has modular design that enables customized functionality at each process point to accommodate application requirements. Hot Backup™ and Sensor Drift Alert, included,Â- ensure seamless performance in case of sensor failure and advance notification of potential issues. Local Operator Interface (LOI) option facilitates on-the-spot commissioning and...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers