New THZ3 and TDZ3 Temperature Transmitters Offer Backup and Fail-over Protection
Delivers an isolated and linear 4-20mA output proportional to the input. Configured and interrogated on the 4-20mA loop via any HART handheld communicator or HART compatible host. Provides input to output analog accuracy of up to ±0.014°C (±0.025°F).
Read More »
New STZ Temperature Transmitter Offers Dual Sensor Input to Reduce Process Interruptions
Smart range alarms with four HART alarms that detect when the variable is within or outside of user preset limits. Sensor drift and corrosion detection checks and alerts user when the sensor is drifting out of a preset range. Configured and interrogated on the 4-20mA loop via HART handheld communicator or HART compatible host.
Read More »
New QVT Multivariable Transmitter Measures Up To Four Separate Process Variables
Designed for high accuracy at very low DP ranges and can be scaled anywhere from 8 in WC down to 0.1 in WC. Operating range from 10 down to .001 in WC and flow measurement accuracies as high as +/-0.50%. Works for applications in which air and/or gas is travelling through duct work at atmospheric pressure.
Read More »
New Three New Duct-mounted Product Models Based on Thin-film Capacitive Humidity Sensor Technology, HUMICAP
HMD60 measures humidity and temperature and TMD60 is dedicated to temperature measurements only. Features latest HUMICAP® R2 sensor for improved stability, accuracy and long-term reliability. Provides improved measurement accuracy up to ±1.5 %RH and ±0.1 °C (±0.18 °F).
Read More »
Comparing Casting Processes
This white paper compares and contrasts common casting processes.
Read More »
New EE23 Series Transmitters are Offered with Corrosion Resistant Coating
The EE23 Series Humidity and Temperature Transmitters are available for wall or duct mount versions with a IP65 / NEMA 4 rated polycarbonate or metal enclosure. The units come in three part design that includes back cover with terminals for wiring, pluggable active part with electronics and probe and a front cover. They offer the measured data in two current or voltage outputs. The transmitter...
Read More »
Vaisala Presents HMD62 and TMD62 Transmitters with IP66/NEMA 4-Rated Metal Bodies
The HUMICAP® HMD62 Transmitter is used for monitoring humidity and temperature whereas the TMD62 for temperature measurements. The HMD62 unit calculates dew point, wet bulb, enthalpy, absolute humidity, and mixing ratio and delivers measurement accuracy of up to ±1.5 % RH and ±0.1 °C (±0.18 °F). It is resistant to chemicals and dust and can be configured using via Insight PC software.
Read More »
New HART Temperature Transmitters Use Callendar-van Dusen Method
HART Temperature Transmitters are designed to SIL 2/3 certification for applications such as chemical, marine, oil and gas. The 60-point-curve helps in detecting and monitoring deviations via drift detection. The transmitters come with automatic redundancy switching and dual sensor operation with 4 wire sensor connections and can be operated in up to -50°C temperature condition. Units feature...
Read More »
THZ3 HART® Temperature Transmitter comes in DIN rail mount housing.
THZ3 compact Dual Input Smart HART® Temperature Transmitter comes with associated IS sensor connections. The unit features universal mounting brackets and internal safe barrier in the front end. Product is equipped with standard relay tracks and is suitable for non-hazardous or Class I, Division 2/Zone 2 hazardous locations. Transmitter offers 20 bit resolution, sensor drift, corrosion detection...
Read More »
TMZ MODBUS Temperature Transmitter provides increased sensor density.
Helping users to increase density, TMZ Dual (2TPRG) PC-Programmable MODBUS Temperature Transmitter comes with dual RTD, thermocouple, mV, resistance or potentiometer inputs. MODBUS output displays data from both sensors, allowing host to use data for averaging, differential or sensor backup. TMZ Dual features two independent sensor inputs, 20-bit input resolution, isolation and RFI/EMI protection.
Read More »
Pressure and Temperature Transmitters offer 4-20 mA output.
Integrated with PT1000 measuring element, ATM.1ST/T Pressure and Temperature Transmitters provide up to 15,000psi of pressure range with accuracy of <±0.1% FS or <±0.25% FS. Operated from -58° to 300°F temperature range, units come with piezoresistive silicon sensor technology. Product is suitable for machine installations, industrial process monitoring and control, heating and ventilation...
Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »
