Telemetry Systems

Telemetry Systems

Radio Telemetry System supports temperature profiling.

Using RF technology, Model TM21 allows temperature data transmission from datalogger in real time. As system travels through process in oven, furnace, or kiln, temperature data can be viewed, analyzed, and reported instantaneously. Model TM21 operates with multiple loggers running at same frequency and collects data with one installation of Datapaq Insight(TM) software. On-screen, real-time...

Read More »
Telemetry Systems

Wireless Telemetry System is suited for strain gauge sensors.

Collecting data over multiple channels simultaneously, T24 system wirelessly connects any strain gauge-based sensor for measurement of load, pressure, torque, and displacement as well as standard 0-10 V and 4-20 mA sensors. Products include acquisition, relay output, and printer modules; handheld displays; analog output; and USB base station. Acquisition module uses secure transmission network...

Read More »
Wireless Telemetry System performs multiple real-time DAQ.
Telemetry Systems

Wireless Telemetry System performs multiple real-time DAQ.

Modular T24 series is based on DAQ devices that can be mixed and matched to provide remote readings for critical applications. One acquisition module can provide data to multiple output devices, and output devices can accept data from multiple acquisition modules. Any strain bridge, voltage, or current output sensor can be integrated to create wireless instrumentation monitoring systems with 120...

Read More »
Electrochem Powers Iditarod GPS Devices for Third Year
Lithium Batteries

Electrochem Powers Iditarod GPS Devices for Third Year

Electrochem will once again power satellite tracking technology for the racing teams in the famous Iditarod Trail Sled Dog Race®. Chosen for its unparalleled performance in extreme environmental conditions, Electrochem's High Rate Lithium Batteries will ensure reliable power to the Satellite Race Telemetry (SRT) unit through low temperatures, severe weather conditions and pounding shock and...

Read More »
Telemetry System offers non-contact operation.
Telemetry Systems

Telemetry System offers non-contact operation.

Designed to transmit strain torque, thermocouple, or voltage signals on rotating or moving machinery while operating in contactless mode, Series 8179 Universal Single-Channel Telemetry System provides maintenance-free continuous operation. Power is transferred inductively and signal is RF-transferred between moving and static component - no brushes or wires required. Remote shunt-calibration...

Read More »
Ruggedized Telematics Platform survives harsh environments.
Global Positioning Systems (GPS)

Ruggedized Telematics Platform survives harsh environments.

Integrating antennas into waterproof enclosure, programmable A1091 integrates SiRFstarIV GPS receiver, quad-band GSM/GPRS modem, and Cortex-M3(TM) ARM MCU. Digital and analog I/O, serial port, Dallas 1-wire®, and CAN interfaces foster connectivity, while SiRFstarIV technology can detect, attenuate, and remove jamming signals. Set in SiRFaware(TM) mode, which draws 50-400 Â-µA, GPS...

Read More »
Telemetry Collar features ultra-thin design.
Telemetry Systems

Telemetry Collar features ultra-thin design.

Housing all electronics needed to provide RF link from sensors mounted on rotating shafts, reciprocating rods, or other moving machinery to stationary DAQ/display instruments, Series 2010iUT is capable of transmitting data with signal content from DC up to 1,100 Hz. Embedded rotating loop antenna and induction power converter to provide continuous, non-interrupted measurements. Receiver...

Read More »
Wireless Telemetry System provides high speed data transfer.
Telemetry Systems

Wireless Telemetry System provides high speed data transfer.

Capable of transmitting data with dynamic signal content from DC up to 5 kHz, 2100H Series is suited for use with accelerometers, RTDs, strain gages, thermocouples, thermistors or any other current or voltage type transducer or sensor. Transmitter frequencies can be staggered, allowing multiple transmitters to be operated in close proximity with no interference. Receivers can remotely control...

Read More »
Telemetry Systems

Semaphore Releases Cyber Security Enhancements for SCADA RTU Product Line

LAKE MARY, FLORIDA - August 25, 2009 - Semaphore, a CSE Global company, has introduced significant cyber security enhancements for its T-BOX line of SCADA system RTU products. HTTPS and IEEE 802.1X are now available with a T-BOX MS Modular System, when equipped with a 32-bit CPU. HTTPS, or HTTP Secure," is the hypertext transfer protocol with encryption using the SSL or TLS protocol. It is now...

Read More »
Telemetry Systems

Semaphore Releases SMS Database Uploading for SCADA RTU Product Line

LAKE MARY, FLORIDA - September 10, 2009 - Semaphore, a CSE Global company, has introduced a significant data logging enhancement for its T-BOX line of SCADA system RTU products. Available in the T-BOX Wireless Monitor, T-BOX LT, and T-BOX MS RTU products, this new feature allows data archives and sampling tables to be transmitted via SMS messaging. Commonly employed for short text messages, such...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers