Tanks

Tanks

Hot Water Storage Tanks offer 200 to 3,000 gal capacities.

Vertical Glass Lined Jacketed and Insulated or Bare ASME Storage Tanks provide supply of hot water at constant outlet temperature. Cobalt-rich, TRU-Blue glass lining and internal stratification baffle create more usable hot water, while magnesium anode rods eliminate shadowing of protected surfaces. Two-inch R-16 insulation surrounds tank, exceeding ASHRAE standards for standby heat losses....

Read More »
Portable Process/Transfer Tanks are designed for fluids.
Tanks

Portable Process/Transfer Tanks are designed for fluids.

Custom-fabricated vessels, including agitators and mixers for product transfer or portable processing, can be manufactured in sizes up to 500 gal. Furnished with casters and push handles for mobility, products may be designed as single shell or jacketed with pressure/vacuum rating if required. Quick disconnect fittings can also be furnished to facilitate relocation. Products can be designed with...

Read More »
Recycled Water Tank has heating/cooling capabilities.
Tanks

Recycled Water Tank has heating/cooling capabilities.

Offered in capacities from 10,000-30,000 gal, Pearson RW Storage Tank Series preheats, pre-cools, and stores recycled water before it is introduced into mix. Self-contained system has vertical tank design with external steel jacketing and holding vessels with no internal parts. Available with optional pH control, it uses combination stainless steel supply and re-circulating pump as well as...

Read More »
Vacuum Degassing Chamber offers rotary motion feed-thru.
Vacuum Chambers

Vacuum Degassing Chamber offers rotary motion feed-thru.

Featuring 304 stainless steel vessel, Model MV has 1Â-½ in. thick clear acrylic top, which accepts optional rotary motion feed-thru for stirring or manipulating batch contents from outside. Suitable for epoxies, urethanes, resins, and other viscous fluids, feed-thru has ¼ in. dia shaft supported by 2 ball bearings for friction-free operation, and is sealed with preloaded Viton...

Read More »
Double Wall Tank comes in 20-165 gal capacities.
Tanks

Double Wall Tank comes in 20-165 gal capacities.

Suited for indoor or outdoor storage of hazardous and corrosive chemicals, IMT system consists of primary inner tank and secondary outer tank with 120% capacity of inner tank. Inner tank dome overlaps outer tank's sidewall, preventing rain, snow and debris from entering secondary containment tank. Available in 20, 40, 65, 85, 120, and 165 gal units, product is equipped with molded-in sump and...

Read More »
Neutralization Tank features seamless design.
Tanks

Neutralization Tank features seamless design.

Rotationally-molded from polypropylene, Neutralization Tank receives, dilutes, and neutralizes corrosive and harmful chemical wastes such as those produced in manufacturing processes. Clean-out cap is located on top of tank, facilitating routine maintenance. Tank features uniform wall thickness and is available in blue-colored resin, which makes it visible in under-counter applications.

Read More »
Roto-Mold Tanks offer custom shapes and colors.
Tanks

Roto-Mold Tanks offer custom shapes and colors.

Made from polypropylene, polyethylene, PVDF, and Halar, impact-resistant Roto Mold Tanks are available with or without insulation in .25 or .50 in. gage. Standard tanks come in vertical, horizontal, open top, domed, and rectangular shapes with up to 10,000 gal capacity. They are suited for chemical storage, wastewater storage, marine applications, and high-temperature uses. Tanks using...

Read More »
Tanks

Pressure Tanks are ASME certified.

Stainless Steel and Zinc Tank is suitable for waterborne coatings when used with disposable tank liner. Lid and all wetted parts in lid assembly, including fluid tube, outlet elbow and fitting, and agitator shaft are 300 grade stainless steel. Zinc-Plated Tank features all zinc-plated parts and is intended for solvent-based coatings. Both feature 2.8 gal capacity and meet NFPA33 and OSHA...

Read More »
RTM Molded Tanks are available in 4 materials.
Tanks

RTM Molded Tanks are available in 4 materials.

Offered in polypropylene, polyethylene, PVDF, and Halar, RTM (Resin Transfer Molding) molded tanks are seamless, one-piece units with smooth interior and exterior. Impact-resistant products can be manufactured in vertical, horizontal, open top, domed, and rectangular shapes, with capacities to 10,000 gal. They are offered with or without insulation, in .25 or .50 in. gage. Inserts can be used to...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers