Frequency Synthesizers, Rate Converters boost design reliability.
Able to create complete clock tree, miClockSynth™ ZL30260–ZL30267 devices include 4 independent frequency families, up to 10 differential or 20 single-ended configurable outputs, and 2 fractional-N APLLs with fractional and integer divider. Output jitter is 170 fs RMS, and any-rate frequency conversion supports input from 10 MHz to 1.2 GHz and output frequency from < 1 Hz...
Read More »
X-band Direct Synthesizer/Upconverter SYN152 features LVTTL switching of 50 ns.
Suitable for airborne environments, SSMP- and SMP-connected lightweight SYN152 operates from -40o C to +85o C. Featuring four x2, x3, x4, and x17 multiplied output ports with various powers in either the L-, S-, or X-bands as well as a X-band BIT detector, unit comes with UHF input power at -6 dBm. Synthesizer can output 0 dBm in the S-band, 2 dBm in the X3 L-band, 4 dBm in the X2 L-band, and 10...
Read More »
Microwave Peptide Synthesizer supports Liberty Blue upgrade.
Featuring efficient solvent usage and in-situ temperature control, Liberty Lite™Ã‚- uses microwave irradiation during both deprotection and coupling steps (15 min cycle times). Flex-Add™ delivery system eliminates need for sample loops and allows infinitely variable volume delivery options. Liberty Blue system upgrade reduces cycle time for complete amino acid addition to 4 min,...
Read More »
Frequency Synthesizer suits complex timing networks.
With 8 fractional and 2 integer output dividers, IDT® 8T49N1012 FemtoClock® NG offers single-chip solution that helps resolve complex timing requirements. Device features 12 configurable clock outputs and phase jitter performance of less than 500 fs RMS (12 kHz to 20 MHz). Output frequencies range from 8 kHz to 1 GHz differential, 250 MHz LVCMOS. Programmable through I2C interface,...
Read More »
Industrywide Applications for Deep Drawn Metal Stamping
Deep-drawn metal stamping applies a significant punching force to radically draw metal sheets into a die cavity. Finished components produced by this process tend to have a depth that exceeds their diameter, which is why manufacturers refer to it as "deep-drawn" metal stamping.
Read More »
Fixed Frequency Synthesizer features integrated reference.
Housed in PLL-V12N package measuring 0.6 x 0.6 x 0.16 in., Model RFS5900A-LF operates at 5,900 MHz which is phase locked to 10 MHz reference with stability of ±2.5 ppm. PPL features typical phase noise of -80 dBc/H, -85 dBc/Hz, and -103 dBc/Hz at 1 kHz, 10 kHz, and 100 kHz offsets, respectively. RoHS-compliant device delivers output power of 3±2 dBm while operating off VCO voltage...
Read More »
Wideband RF Phase-locked Loops feature integrated VCOs.
Available in 40-pin, 6 x 6 mm QFN package, Models LMX2582 and LMX2592 support output frequencies up to 5.5 GHz and 9.8 GHz, respectively.Â- Devices provide 1.8 GHz carrier open-loop VCO phase noise of -144.5 dBc/Hz at 1 MHz offset. Featuring normalized PLL noise floor at -231 dBc/Hz and phase-detector frequency of 400 MHz, products enable very low integrated noise of 47 fs RMS...
Read More »
Fixed Frequency Synthesizer features ultra low phase noise.
Operating at 6,265 MHz with external 100 MHz reference oscillator, Model SFS6265A-LF features typical phase noise of -89 and -90 dBc/Hz atÂ- 1 kHz and 10 kHz offsets, respectively. Device delivers typical output power of +3 dBm while operating off VCO voltage supply of 5 Vdc and drawing 35 mA, and phase locked loop voltage of 3 Vdc while drawing 11 mA. Housed in 0.6 x 0.6 x 0.13 in. PLL-V12N...
Read More »Universal Quad Clock (800 MHz) suits complex timing solutions.
Utilizing flexible delta-sigma modulator andÂ- 2–3 GHz VCO, XR81411 quad-output LVCMOS/LVDS/LVPECL configurable clock synthesizer generates 10–800 MHz frequencies with 4 independent PLLs. Clock outputs have phase noise jitter down to
Read More »
Frequency Synthesizer offers low-noise signal source in Ku Band.
Operating at 13.05 GHz with external 100 MHz reference oscillator, 1.0 x 1.0 x 0.22 in. SFS13050H-LF features typical phase noise of -88 dBc/Hz @ 10 kHz offset. This RoHS-compliant, single-frequency synthesizer delivers output power of 0±3 dBm while operating from -40 to +85°C. Powered by VCO voltage supply of 5 Vdc while drawing 90 mA (typ) and PLL voltage of 3 Vdc while drawing 45...
Read More »
Fixed Frequency Synthesizer features ultra-low phase noise.
Designed to generate output signal at 11.6 GHz while being fixed to external 100 MHz reference oscillator, Model SFS11600H-LF delivers phase noise performance of -98 dBc/Hz at 1 kHz and -103 dBc/Hz at 10 kHz offset. RoHS-compliant device provides nominal output power of 0 dBm into 50 Ω load. Housed in 1.0 x 1.0 x 0.22 in. SFS-L1 package, synthesizer operates with VCO voltage supply of 5 Vdc...
Read More »
Increase Workplace Safety, Manage Heavy Loads with Equipment from A-Plus Warehouse
A-Plus Warehouse carries a wide selection of commercial and industrial material handling equipment at affordable prices. Check out the video to learn more.
Read More »
