Fixed Frequency Synthesizer operates at 1,685 MHz.
Measuring 0.60 x 0.60 x 0.13 in., Model SFS1685A-LF features typical phase noise of -106 dBc/Hz at 10 kHz offset and typical sideband spurs of -80 dBc. Unit delivers output power of 6 dBm with VCO voltage supply of 5 Vdc while drawing 31 mA and phased locked loop voltage of 3 Vdc while drawing 9 mA over temperature range of -40 to 85°C. Featuring typical 2nd harmonic suppression of -25 dBc,...
Read More »Communication Analyzer features smart post processing.
Addressing requirements of optical transceiver manufacturers, PXIT N2100B DCA is available with PXIT 10G Digital Communication Analyzer (DCA), Passive Optical Network (PON) filter rate options, and smart post processing. It supports data acquisition rates to 160 MS/s and also enables transceiver manufacturers to capture multiple sets of eye diagrams under different test conditions and then...
Read More »
Fixed Frequency Synthesizer offers low phase noise.
Operating in S-band at 3263.31 MHz, RoHS-compliant SFS3263A-LF features typical phase noise of -95 dBc/Hz @ 10 kHz offset and typical sideband spurs of -70 dBc. It delivers typical output power of 9 dBm with VCO voltage supply of 5 Vdc while drawing 33 mA (typ) over -40 to +85Â-ºC range. Additional characteristics include typical phase locked loop voltage and current of 3 Vdc and 13 mA,...
Read More »
5 Reasons Why Laser Welding is the Optimal Choice For Your Next Welding Project
This white paper outlines the advantages of laser welding.
Read More »Clock Synthesizer ICs break 100 femtosecond jitter barrier.
Comprised of 25 sole source and second source clock synthesizers, QuietClock(TM) Series typically limits RMS jitter to 60 femtosecond. Units feature 3.3 and 2.5 V operation, 1-10 outputs from mix of single-ended and differential outputs, and industrial temperature range of -40 to 85°C. Covering frequencies used by PHY, MAC, SERDES, and memory subsystems, ICs are suited for Gigabit Ethernet,...
Read More »Frequency Synthesizer features low jitter output.
Model SY89610L takes in selected frequency clocks between 19-694 MHz and outputs selected frequency with low jitter, typically 1 psec rms. Device input accepts ac- or dc-coupled differential signals such as LVDS, LVPECL, and CML, and incorporates LC Tank VCO and auto-tune circuit that optimizes signal performance. Available in 32-pin MLF® package, applications include SONET/SDH, 10GeB FEC,...
Read More »Dual Output Clock Generator suits high-speed equipment.
Utilizing low-noise VCO and PLL architecture, Model MAX3674 generates 5 ps RMS jitter output up to 1,360 MHz from low-frequency reference clock provided by on-board crystal oscillator or external LVCMOS clock. Unit provides 2 differential LVPECL outputs for same or different frequencies. IÂ-²C-compatible interface enables fine-tuning of output frequency for frequency-margining testing....
Read More »CeBIT Charmed by IVONA's Beautiful Voice
IVO Software - 11/03/2008 CeBIT Visitors Impressed By Text To Speech Potential The stand of IVO Software, the manufacturer of one of the best text to speech systems in the world, was among those attracting the largest numbers of visitors at this year's CeBIT. The opportunity to enter texts and listen to IVONA reading them out aroused the biggest interest. CeBIT is one of the most prestigious IT...
Read More »ST's MEMS and RF Devices Selected Top Products by EETimes
Geneva, January 04,2008 - An ultracompact MEMS accelerometer and a multi-band RF synthesizer from STMicroelectronics (NYSE: STM) were selected as top products in the quarterly EETimes and eeProductCenter Ultimate Products Survey. ST's LIS244AL low-g linear accelerometer was chosen as a Top Ten product in the Interconnect/Passives and Electromechanical category. ST's accelerometer won acclaim from...
Read More »Frequency Synthesizers come in 3U rack-mount chassis.
Available in both single and dual output versions, WaveCor 5.0 and WaveCor 10.0 synthesizers operate over frequency range of 300 MHz to 5.0 GHz and 300 MHz to 10.0 GHz, respectively. Units provide phase noise levels of -137 dBc/Hz at 10 kHz offset and typical spurious levels of -65 dBc. Switching speeds on both models are less than 200 nsec when tuning to any operating frequency.
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
