Subassemblies

OSI Systems Receives $4 Million Order for Electronic Sub-Assemblies

HAWTHORNE, Calif. -- OSI Systems, Inc. (NASDAQ: OSIS), a vertically-integrated provider of specialized electronic products for critical applications in the Security and Healthcare industries, today announced that OSI Electronics, a business within its Optoelectronic and Manufacturing division, has received an order for approximately $4 million from ITT Corporation for electronic sub-assemblies....

Read More »
Wafer Lift Subassembly can carry a load of 12 lb.
Miscellaneous Lifts

Wafer Lift Subassembly can carry a load of 12 lb.

With 2.25 in. stroke and duty cycle time of 1 cycle/sec, Wafer Lift Subassembly helps toolmakers simplify their automation requirements. It utilizes servo drive and motor, size 15 Ball Rail® with precision 12 mm dia ball screw in T5 accuracy class. Unit comes tested and ready to install as single component and provides smooth, vibration-free motion and is rated for more than 7 million...

Read More »
Miscellaneous Processors

Hardware Platform Interface manages ACTA shelves.

Installed as integrated subsystem of ShMM-500R Shelf Manager, IntegralHPI(TM) enables Hardware Platform Interface (HPI) accessibility to fully loaded AdvancedTCA® (ATCA) shelf. It preserves binary interface for OpenHPI client applications, tightly integrating its operation with Shelf Manager. Leveraging Shelf Manager's redundancy architecture, product deliver HPI service that is...

Read More »
Data Links

Optical Sub-Assembly provides key component for LRM modules.

Designed to meet needs of 10 Gbps SFP+ and XFP 10Gbase-LRM modules, Fabry-Perot LC Transmit Optical Sub Assembly uses XMD-MSA compatible Flex as standard electrical interface and is available with LC optical receptacle, with SC as option for other form factors. Unit employs 1,310 nm Fabry-Perot laser diode designed for direct modulation and un-cooled operation over -5 to +85° temperature...

Read More »
Printer offers 100 mm/sec speed and 8 dot/mm resolution.

Printer offers 100 mm/sec speed and 8 dot/mm resolution.

RoHS-compatible, 2 in. FTP-627USL401 series thermal printer subassembly for mini-kiosk, self-service, and receipt-generating applications features easy load mechanism that facilitates paper roll replacement. It has 100 x 108 x 94 mm form factor and includes miniature interface board and integrated auto cutter with 500,000 cut operation. Printer supports alphanumeric, kana, 2-D barcodes, and...

Read More »
Signal Receivers

Transmit and Receive Pair optimize 10GBASE LRM performance.

Designed to optimize performance of 10GBASE LRM modules, 1310 TOSA and linear ROSA 10Gbps transmit and receive pair exhibit typ OMA sensitivity of -17 dBm. LRM ROSA includes 10Gbps InP PIN photo-detector, transimpedance amplifier, and LC or SC optical barrel. ROSA has differential output and remains linear over input power range defined in LRM standard. Product is optimized to work with...

Read More »
Multiplexers

Optical Subassembly is for use in 10GBASE-LX4 transceivers.

Small form factor receive optical sub-assembly, Quad LX4 ROSA multi-filter chip is a 4-channel CWDM optical component consisting of 4 optical filters deposited on single piece of fused silica and used to demultiplex the 10Gbps data into 4 separate 2.5 Gbps channels. Each channel is fitted with its own high-speed photo detector and transimpedance amplifier. Product is designed for use in X2/XPACK...

Read More »
Slot Systems and Connectors support ExpressCard technology.
Electrical Connectors

Slot Systems and Connectors support ExpressCard technology.

ExpressCard(TM) host connectors and slot systems support implementation of ExpressCard technology in mobile and desktop PCs. Top-mount universal slot systems with card push ejection are offered with slot standoffs from 0.0-2.2 mm. Supporting USB 2.0 and PCI Express(TM) serial interfaces, 26-position connector system is validated at PCI Express data rates of 2.5 and 5.0 Gbps. RoHS-compliant host...

Read More »
ATCA Node Blade is available with MontaVista Linux CGE.
Single Board Computers (SBC)

ATCA Node Blade is available with MontaVista Linux CGE.

Node Board ATC4130 offers MontaVista Linux Carrier Grade Edition (CGE) support, making it suited for telcom and data communications products that require high availability, fault management, and real-time performance. Featuring 2.4 GHz Xeon processor, PICMG 3.1-compliant, packet-switched processor blade uses E7501 server-class chipset with 400 MHz FSB and offers 2 on-board 10/100/1,000 Mbits/sec...

Read More »
Telecom Blade has 1 GHz processor and PICMG 2.16 interface.
Miscellaneous Controllers

Telecom Blade has 1 GHz processor and PICMG 2.16 interface.

Katana(TM)752i is equipped with PowerPC® 750GX processor and Marvell Discovery III system controller. Configurable cPSB blade features 2 PTMC sites, 4 Gigabit Ethernet channels, multi-level cache, and CTBus/H.110 interconnect that enables product to acquire and process both TDM and packet data. PTMC sites support 32-bit PCI data transfers at 33 or 66 MHz and feature dedicated CTBus and RMII...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics