New Strippers Products

Tool Kit facilitates installation of crimp style connectors.

Intended for use with Versatile linkÃ-® connectors, Installer's Tool Kit includes hand tool that can terminate fiber and strip jacket to proper length, as well as crimp tool that installs connector with consistent results every time. Blade on termination tool is mounted on gear assembly that rotates blade every time user cuts fiber for even wear. After 1,260 cuts, cutting assembly will stop...

Tooling System is designed for thick turret punch presses.

MXC(TM) tooling system consists of punches, strippers, and Slug FreeÃ-® dies for Ã-½ in. A, 1Ã-¼ in. B, 2 in. C, 3Ã-½ in. D, and 4Ã-¼ in. E thick turret stations. Manufactured of DuraSteel(TM), MXC Punches feature minute back taper with near polished punch flanks to reduce friction and heat build-up during punching cycle. MXC Strippers, manufactured of 4150 tool steel, are...

Electric Wire Stripper requires no blade changes.

Stripping wire sizes from 36-10 AWG, Cosmic 927R wire stripper features micrometer dial for choosing stripping diameter in 0.01 mm increments, and shows selection via digital display. Portable device operates on 100 Vac, 60 VA. Rotating 4 blade stripper allows selection of full or partial pull-off lengths from 1-25 mm. Stripping head rotation and twist (or non-twist) direction is changeable from...

Wire and Cable Stripper is for small gauge wire.

Cosmic 927R Micro-Cable Stripper strips conductors from 36-10 AWG, and features controls allowing stripping diameters to be set in 0.1 mm increments. Machine is capable of stripping lengths from 1-25 mm, with partial lengths of 1 mm possible. Device features 1.5 sec maximum cycle time, and is suited for use with TeflonÃ-® insulation, rubber, and various wire and cable insulations and jackets.

Thermal Solutions Guide: The Challenges for Heavy Equipment OEMs

In this guide, we consider some of the most common applications that require thermal solutions, such as vehicle exhausts, fuel tank shielding, and engine compartments, firewalls, & underbodies. As well as the options available to mitigate risk around combustion engines.

Eraser's HTS Series Handheld Thermal Wire Strippers

The HTS1 and HTS2 are Handheld Thermal Wire Strippers perfect for stripping extruded wires with solid or stranded conductors. The HTS1 strips wires from 1/2 OD to 43 AWG (12.7mm - .056mm). The HTS2 strips wires from 18 AWG to 43 AWG (1.02mm - .056mm). With the adjustable heat control the element temperatures can be set up to 1100Ã-

Electrical Hand Tools suit variety of wire types.

Made of high carbon, heat-treated steel, RIDGIDÃ-® electrical hand tools line comprises 10 models for cutting, stripping, and crimping stranded copper, copper, coaxial, and fiber optic cables. Tools feature RIDG-BACK(TM) cutting blade, return-spring, and cushion-grip handles for operator comfort. Paint-filled tool graphics provide quick and long-lasting identification of all tool functions,...

Eraser's Magnet Wire Stripping Pot Offers Clean Stripping of Magnet Wire

The Magnet Wire Stripping Pot strips film insulations from wires of all sizes and configurations. The wires are dipped into the stripping solution to quickly remove the insulation. This stripping method will not cause mechanical stress or abrasion to the conductor. The units are available in two models. The DSP1 has a basic temperature control. The DSP2 has a programmable temperature control for...

Wire Cutter/Stripper strips 6-12 AWG stranded wire.

Multifunctional, lightweight, large gauge Wire Stripper/Cutter (Cat. No. 11053) cleanly shears 6-32 and 8-32 screws and has serrated pliers nose for pulling, gripping, and twisting wire with minimal pressure. Curved handle design and double-dipped textured grips provide control and comfort. Made of heat-treated tool steel for durability with black oxide finish for corrosion resistance, tool...

Ultra-Fast Wire Stripping in Portable Unit

The Cosmic 30 benchtop unit from Komax is an all-electric machine that requires no blade changes to strip single wire sizes from AWG 32 to AWG 14. Partial pull-off or full pull-off lengths of 1.0mm to 25mm occur in 0.3 seconds. A micrometer dial chooses stripping diamter in 0.01mm increments and shows the selection via a large digital display. The four-blade design cleanly strips a wide range of...

Punch Stripper pierces/strips material up to 2.0 mm thick.

Die-spring actuated True-Strip(TM) fits directly on to industrial standard retainers with one screw and complies with all NAAMS specifications. Anti-loosening thread locking patch minimizes chance of loosening during operation. Available in 7 inch and metric ball-lock shank diameters, self-contained stripping device features flanged steel can that is precision machined and burnished from...

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.