Stepper Motors

Motor/Controller Kit offers fully programmable functions.
Stepper Motors

Motor/Controller Kit offers fully programmable functions.

Simple Step 17 with Designer's Kit includes integrated motor, RS485-RS232 converter card, db-9 female connector cable, switch push button, Opto Sensor, 4-pin connector for converter card, extra wiring for I/O, and CD-ROM. Motor offers automatic execution of stored commands upon power up, fully programmable ramps and speeds, bipolar control, 2 digital I/O and 2 fixed input channels, and up to 85...

Read More »
Stepper Motor features fully integrated controller.
Stepper Motors

Stepper Motor features fully integrated controller.

Simple Step 17 can be set to execute preset string of commands upon power up, including nested loops and execution halt pending switch closure. User can link up to 16 step motors and store up to 16 programs. Simple Step is capable of stand alone operation with no connection to PC. Fully programmable features include up to 256 micro stepping resolution, bipolar control, 2 digital I/O and 2 fixed...

Read More »
Step Motors offer holding torques from 45-83 oz-in.
Stepper Motors

Step Motors offer holding torques from 45-83 oz-in.

Super Torque Size 17 (1.66 in.Â-²) hybrid step motor family is offered with 3 axial lengths. Shorter, 1.8° per step motor develops 45 oz-in. of holding torque in 1.34 in. long package, while longest model provides 83 oz-in. of holding torque in 1.89 in. long package. When used with half step driver bipolar model No. R208, step motor model 4118L achieves running torques of 56 oz-in. at...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Stepping Motor can hold torque up to 83 oz-in.
Stepper Motors

Stepping Motor can hold torque up to 83 oz-in.

Available in 1.34, 1.57, and 1.89 in. lengths, 1.8Â-º, NEMA size 17 Super Torque Step Motor is capable of holding torque from 30-83 oz-in., depending on length. Unipolar and bipolar windings are available to allow for torque and speed required to accommodate specific needs. Product is suited for use in applications where load capacities are critical to precision system operation.

Read More »
Step Motor offers holding torque to 30 oz-in.
Stepper Motors

Step Motor offers holding torque to 30 oz-in.

Available in 1.10, 1.38, and 1.54 in. lengths, 0.9Â-º NEMA size 17 High Accuracy motor is capable of holding torque ranges from 12-30 oz-in., depending on length of motor. Product has low inertia, between 0.07-0.13 oz-in.², and is available with unipolar and bipolar windings. Motor is suited for microstepping control and wherever accuracy is critical, as in automation, medical, and...

Read More »
Stepping Motors produce up to 133 oz-in. of torque.
Stepper Motors

Stepping Motors produce up to 133 oz-in. of torque.

PK Series P-type models, available in 1.54 and 2.32 in. stack length models, respectively produce 55.2 and 106.2 oz-in. of holding torque when driven with unipolar driver and 69.4 and 133 oz-in. when driven with bipolar driver. Hybrid, 2-phase stepping motors have rated input current of 0.85 A per phase, bipolar, and 1.2 A per phase, unipolar. Integral 6-pin plug-in connector receptacle is...

Read More »
Miniature Step Motors provide near vibration-free operation.
Stepper Motors

Miniature Step Motors provide near vibration-free operation.

Size 11, 2-phase, hybrid step motors include 3 models. Model 211-20-02 develops 16.6 oz-in. of holding torque in 1.99 in. long package. Models 211-13-02 and 211-18-02 are 1.25 and 1.75 in. long with holding torque values of 9.2 and 13.7 oz-in., respectively. Model 211-20-02 achieves torque and speed of 7.8 oz-in. at 10,000 half-steps per sec, or 8.6 W output with driver input of 24 Vdc and 1.3...

Read More »
Stepping Motor suits precision control applications.
Stepper Motors

Stepping Motor suits precision control applications.

Suited for applications that demand sensitive position control, 0.9° stepping motor operates quietly and achieves low resonance by using full or half step drive. Product offer bi-directional operation, ±5% non-cumulative position accuracy, and 260 oz-in. of holding torque. NEMA size 23 hybrid stepping motor, measuring 2.25 in.Â-², is available in multiple lengths with totally...

Read More »
Stepper Motors perform at 16 resolution modes.
Stepper Motors

Stepper Motors perform at 16 resolution modes.

INS20-PF Stepper Motor series works with company's INS 2-Phase NanoDrive(TM) and offers up to 200,000 steps-per-revolution for smoothness and resolution. Features include 187 Oz-in holding torque in Nema sizes 17 and 23 and all-metal bearing construction in 2-phase stepper motor package. Steppers feature current rating of 2 A, voltage of 2.78-5.46 V, and basic step angle of 1.8°.

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics