Stepper Motors

Non-Captive Linear Actuator occupies 0.8 in. space.
Stepper Motors

Non-Captive Linear Actuator occupies 0.8 in. space.

Suited for linear motion applications, Size 8 hybrid linear actuator features engineering thermoplastics in rotor drive nut and stainless steel Acme lead screw for quiet and maintenance-free operation. It is available in resolutions from 0.0015-0.04 mm per step and delivers thrusts of up to 10 lb. Design is suited for linear travel requirements and applications where lead screw is secured at both...

Read More »
Stepper Motors

Stepper Motors feature onboard drive electronics.

Series DSM includes NEMA frame sizes 17, 23, and 34, each with 1, 2, or 3 winding stacks. Torque ratings include 32, 60, 74.9, 90, 144, 239, 381, 575 or 1,061 oz-in. The 1.8° stepping motor can be configured for operation in any of 14 step sizes from Â-½-256 micro-steps per full step using Windows® utility and motor-to-PC set-up cable. Chosen setting is stored in non-volatile...

Read More »
Step Motor generates 2.5 oz-in. holding torque.
Stepper Motors

Step Motor generates 2.5 oz-in. holding torque.

Model DSM2030H-14060 sub-miniature 1.8° per step hybrid step motor measures 0.79 x 0.79 x 1.18 in. long. It generates bipolar driver current of 600 milliamps per phase, and square configuration allows larger rotor OD to be utilized, providing higher holding and running torque values. Unit phase resistance is 6.5 ohms per phase at 25°C ambient temperature. A 0.157 in. shaft is provided...

Read More »
Step Motors survive exposure to radiation environments.
Stepper Motors

Step Motors survive exposure to radiation environments.

Constructed with radiation-resistant materials, 1.8° step motors in RH Series are available in frame sizes 5, 11, 15, 17, 23, 34, and 42. They use high-temperature windings, are compatible with bi-polar drive systems, and have torque ranges of 0.2-26, 60-450, and 400-1,600 oz-in. Rated for total accumulated dose of 2 x 108 rads, radiation-hardened products are available in custom versions,...

Read More »
Microstep Motor has outside diameter of 4 mm.
Stepper Motors

Microstep Motor has outside diameter of 4 mm.

Designed for use in medical, optical, and fiber optic communications applications, LPD4 dual-phase, permanent magnet, micro-sized stepping motor has overall axial length of 8.3 mm. It can produce pull-out torque to 11 milli-oz-in. @ 1,875 rpm and holding torque to 23 milli-oz-in. Max unloaded pull-in speed for 3 Vdc motor is 6,000 rpm, and step angle is 22.5°.

Read More »
Step Motor is available with 5 mounting options.
Stepper Motors

Step Motor is available with 5 mounting options.

Size 14, 0.9°, modular step motor, 3509V, integrates windings encapsulated with thermally conductive, ceramic-based polymer. Measuring 0.82 in. thick and 1.44 in. squared, bipolar stepper weighs 0.27 lb and possesses holding torque values to 16 oz-in. Step accuracy is ±1.5 arc min at 1/64 microstepping, and mounting plate allows user to choose from multiple mounting options for Nema...

Read More »
Open-Loop Stepping System controls position and speed.
Stepper Motors

Open-Loop Stepping System controls position and speed.

SureStep(TM) includes 4 motors and one-size-fits-all step motor drive. With holding torques from 83-434 oz-in. in NEMA size 17, 23, or 34 frames, motors operate from 2.8 A/phase. Two-phase, bipolar motors have 200 full steps/revolution or 1.8°/full step. Drive features standard +5 Vdc optically-isolated logic inputs for interfacing with DirectLOGIC PLCs and other controllers/indexers. DIP...

Read More »
Custom Step Motors have 0.9° step angle.
Stepper Motors

Custom Step Motors have 0.9° step angle.

Available with 4 or 6 leads, NEMA 14 steppers for OEMs allow users to specify motor length, windings, and mountings in addition to type, color, and length of lead wires and connectors. Other options include choice of bearings and custom shafts (single or double, length, flats, pinions, keyways). Typical 4.5 V, 0.9° NEMA 14 stepper, measuring .87 in. deep, has holding torque of 5 oz-in. with...

Read More »
Stepper Motor features 0.9° step size.
Stepper Motors

Stepper Motor features 0.9° step size.

Available in lengths of 0.92, 1.10, 1.38, and 1.54 in., NEMA Size 17 High Accuracy Motor is capable of holding torques from 12-30 oz-in., depending on length. Emitted inertia is between 0.07-0.13 oz-inÂ-². Unipolar and bipolar windings are available to allow for torque and speed required to accommodate specific needs. Motor is suited for microstepping control in applications such as...

Read More »
Hybrid Stepper Motors suit fine-positioning applications.
Stepper Motors

Hybrid Stepper Motors suit fine-positioning applications.

MAE(TM) S Series is offered in standard NEMA23 frame size and 3 models with step resolutions of 1.8° in full-step mode. They feature precision-honed stators and ground rotors for tight air gap. Units are available with 4, 6, or 8 leads and single- or double-ended shaft extensions. Offered in lengths of 1.61, 2.17, and 3.09 in., motors achieve holding torques of 67, 139, or 231 oz-in. All...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers