Stepper Motors

NEMA34 Stepper Motors come in 95-156 mm long packages.
Stepper Motors

NEMA34 Stepper Motors come in 95-156 mm long packages.

Featuring RS485 and CANopen serial interface as well as programmable motion controller, MIS340/1/2 motors contains everything needed to solve control task as stand-alone unit or controlled via PLC/PC. Resolution of 819,200 step/revolution promotes smooth and silent running, and 8 I/O points can be configured to be digital input/output or analog input. Velocity and acceleration ratings are 0.01...

Read More »
NEMA34 Stepper Motors come in 95-156 mm long packages.
Stepper Motors

NEMA34 Stepper Motors come in 95-156 mm long packages.

Featuring RS485 and CANopen serial interface as well as programmable motion controller, MIS340/1/2 motors contains everything needed to solve control task as stand-alone unit or controlled via PLC/PC. Resolution of 819,200 step/revolution promotes smooth and silent running, and 8 I/O points can be configured to be digital input/output or analog input. Velocity and acceleration ratings are 0.01...

Read More »
8 mm Family of DC Motors, Gearheads, Encoders
Stepper Motors

8 mm Family of DC Motors, Gearheads, Encoders

With an outer diameter of only 8 mm, this new family of mini-drives provides maxi power. It is an impressive solution with a wide variety of combination possibilities using DC-Micromotors, with precision gearheads and micro-encoders. DC-Micromotors 0816 ... S The DC-Micromotors series 0816 ... S, available in 3, 6 and 8 Volt versions, have an exceptional power-to-volume ratio. The patented...

Read More »
8 mm Family of DC Motors, Gearheads, Encoders
Stepper Motors

8 mm Family of DC Motors, Gearheads, Encoders

With an outer diameter of only 8 mm, this new family of mini-drives provides maxi power. It is an impressive solution with a wide variety of combination possibilities using DC-Micromotors, with precision gearheads and micro-encoders. DC-Micromotors 0816 ... S The DC-Micromotors series 0816 ... S, available in 3, 6 and 8 Volt versions, have an exceptional power-to-volume ratio. The patented...

Read More »
Compact Stepping Motor has 20 mm frame size.
Stepper Motors

Compact Stepping Motor has 20 mm frame size.

Available with single or double shaft, PK 20mm is 1.8-º per step stepping motor with 20 mm (0.79 in.) frame size and 50 g (1.77 oz) mass. These characteristics suit limited-space applications, along with stack length of 30 mm and respective unipolar and bipolar torque ratings of 1.98 oz-in. (5 motor leads) and 2.8 oz-in. (4 motor leads).

Read More »
Compact Stepping Motor has 20 mm frame size.
Stepper Motors

Compact Stepping Motor has 20 mm frame size.

Available with single or double shaft, PK 20mm is 1.8Â-º per step stepping motor with 20 mm (0.79 in.) frame size and 50 g (1.77 oz) mass. These characteristics suit limited-space applications, along with stack length of 30 mm and respective unipolar and bipolar torque ratings of 1.98 oz-in. (5 motor leads) and 2.8 oz-in. (4 motor leads).

Read More »
Hybrid Stepper Motors offer fine positioning capability.
Stepper Motors

Hybrid Stepper Motors offer fine positioning capability.

Incorporating neodymium magnets, precision-honed stators, and ground rotors, MAE-® HN Series provides accurate open-loop control suitable for positioning applications. Standard Size 34 models are available in 3 versions with lengths from 2.64-4.92 in. and step resolutions of 200 steps/rev in full step mode. Holding torques from 397-1,076 oz-in. can be achieved, depending on model. Available with...

Read More »
Hybrid Stepper Motors offer fine positioning capability.
Stepper Motors

Hybrid Stepper Motors offer fine positioning capability.

Incorporating neodymium magnets, precision-honed stators, and ground rotors, MAEÂ-® HN Series provides accurate open-loop control suitable for positioning applications. Standard Size 34 models are available in 3 versions with lengths from 2.64-4.92 in. and step resolutions of 200 steps/rev in full step mode. Holding torques from 397-1,076 oz-in. can be achieved, depending on model. Available...

Read More »
NEMA AC Motors come in 42, 48, and 56 frame sizes.
Stepper Motors

NEMA AC Motors come in 42, 48, and 56 frame sizes.

Available in 3-phase and single-phase TEFC and open drip-proof types, NEMA48 and NEMA56 motors are designed with 1.00, 1.15, or 1.25 service factors, depending on rating and frame size, for overload conditions. Units have double shielded bearings and are offered with rolled steel, cast iron, or aluminum housings. With input voltage of 115-120 Vac, NEMA42 motors deliver output power from 118-360 W...

Read More »
NEMA AC Motors come in 42, 48, and 56 frame sizes.
Stepper Motors

NEMA AC Motors come in 42, 48, and 56 frame sizes.

Available in 3-phase and single-phase TEFC and open drip-proof types, NEMA48 and NEMA56 motors are designed with 1.00, 1.15, or 1.25 service factors, depending on rating and frame size, for overload conditions. Units have double shielded bearings and are offered with rolled steel, cast iron, or aluminum housings. With input voltage of 115-120 Vac, NEMA42 motors deliver output power from 118-360 W...

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics