Stepper Motors

ASI Launches New Line of Motion Products
Stepper Motors

ASI Launches New Line of Motion Products

ASI, Inc is proud to announce the launch of a new line of motion products. The line includes high quality, low-cost DC step drives, step motors, and integrated stepper motor and drives. For convenience, ASI is offering DC step drives with 5 or 10-amp output and low-cost DC step drives with 2 or 3.5-amp output. To compliment these drives, ASI offers a line of stepper motors with NEMA frame sizes...

Read More »
Stepper Motors

Hybrid Stepper Motors provide microstep operation.

Available in NEMA 17, 23, and 34 frame sizes, MAE® HS Series provides step resolutions of 1.8° in full-step mode. Motor lengths range from 1.614-5.591 in. and holding torques from 71-1,416 oz-in. can be achieved, depending on model. All models incorporate precision-honed stators and ground rotors, as well as high-temperature grade neodymium iron-bore magnets and single- or...

Read More »
Stepper Drive and Motor Unit are fused into single device.
Stepper Motors

Stepper Drive and Motor Unit are fused into single device.

Featuring advanced current control, anti-resonance technology, torque ripple smoothing, and microstep emulation, STM Drive+Motor solution delivers optimized stepper performance suited for variety of automation applications. It is available in lengths of 92.4 and 114.4 mm with output torque of up to 125 and 245 oz-in., respectively. Unit has 3 digital inputs, one digital output, and analog output,...

Read More »
Stepper Motor Controller is IP20-rated.
Stepper Motors

Stepper Motor Controller is IP20-rated.

Designed for X20 controller and I/O system, X20 stepper motor controller features 4 inputs for end switches/encoders, and automatic motor detection when booting and stall detection that identifies overload situations or any unwanted blocking of motor. Stepper motor connections can resolve each full step into up to 256 microsteps. Offering integration with Automation Studio and Soft CNC, unit is...

Read More »
Stepper Motors

Step Motor is RoHS compliant.

Capable of up to 85 oz-in. of holding torque depending on stack size of motor, SilverPak 17D is 2 phase, 1.8° NEMA 17 motor with integrated microstepping driver. Available in 2.69, 2.92, and 3.24 in. body lengths, features include operating voltage range from 12-24 Vdc, phase current range from 0.25-2.0 A peak, step resolutions from full stepping to 16x microstepping, optically isolated...

Read More »
Hybrid Step Motor incorporates torque-optimizing magnets.
Stepper Motors

Hybrid Step Motor incorporates torque-optimizing magnets.

RoHS-compliant h3 Series incorporates enhancing magnets, inserted between each stator tooth, to optimize torque output across entire speed range. Supplied in aluminum housing for optimal heat dissipation, these 1.8° step motors feature Neodymium iron boron magnets as well as bearing retainer and o-ring. Larger bearings enable motor to handle higher side and radial loads. They are available...

Read More »
Stepper Motors

Stepping Motor/Driver uses Mechatrolink(TM) II protocol.

Five-Phase MLN50 Mechatrolink Stepper Motor and Driver Network series is 100/200 V AC Driver system that yields full programming command functions and offers communicational data rate up to 10 Mb/s and transmission range up to 50 m max. System measures 120 x 175 x 45 mm and can be empolyed in operational compliancy with patented Mechatrolink Network Controller Bus Communication Motion Link for...

Read More »
Controller and Stepper Motor offer single/multiaxis handling.
Stepper Motors

Controller and Stepper Motor offer single/multiaxis handling.

EMMS-ST stepper motor offers holding torque from 0.5-9.3 Nm, with external gearbox options of 3:1 and 5:1. Configurable as open- and closed-loop, CMMS-ST controller integrates braking resistor and mains filer, SD/MMC memory card, and network interfaces for Profibus and DeviceNet. There are 63 configurable positions, 8 positioning profiles with sequencing capability, and positioning profile...

Read More »
Linear Stepper Motor features 1 micron resolution.
Stepper Motors

Linear Stepper Motor features 1 micron resolution.

Capable of 5 lb continuous force, 5 lb Linear Stepper travels at 80 ips, can operate in any axis, and features 1 G acceleration. Two-phase, single-axis motor is capable of precise position, velocity, and acceleration control when integrated with microstepping drive and indexer; resolutions are .010 in. for full step and .00004 in. for one microstep. While suited for open loop positioning...

Read More »
Hybrid Stepper Motors offer fine positioning capability.
Stepper Motors

Hybrid Stepper Motors offer fine positioning capability.

Providing open-loop control, MAE® HN Series incorporates neodymium magnets, precision-honed stators and ground rotors, single- or double-ended shaft extensions, and 4, 6, or 8 leads. Size 34 steppers come in 3 models with lengths from 2.64-4.92 in., step resolutions of 1.8° in full-step mode, and holding torque from 397-1,076 oz-in. Manufactured according to EN 60034-1: 1995-02...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers