Stepper Motor Controllers and Drives

PCI Card provides stepping/pulse-type servo motor control.
Stepper Motor Controllers and Drives

PCI Card provides stepping/pulse-type servo motor control.

Designed for general-purpose, extreme motion applications, 4-axis Model PCI-1240U features NOVA® MCX314-motion ASIC that builds in variety of motion control functions, such as 2/3-axis linear interpolation, 2-axis circular interpolation, and T/S-curve acceleration/deceleration rate. Card includes hand wheel and jog function, up to 4 MPPS output for each axis, 2 pulse output types, up to 1...

Read More »
Controller and Stepper Motor offer single/multiaxis handling.
Stepper Motor Controllers and Drives

Controller and Stepper Motor offer single/multiaxis handling.

EMMS-ST stepper motor offers holding torque from 0.5-9.3 Nm, with external gearbox options of 3:1 and 5:1. Configurable as open- and closed-loop, CMMS-ST controller integrates braking resistor and mains filer, SD/MMC memory card, and network interfaces for Profibus and DeviceNet. There are 63 configurable positions, 8 positioning profiles with sequencing capability, and positioning profile...

Read More »
Stepper Motor Controllers and Drives

Panel Mounting Stepper Drives eliminate dc supply.

Operating stepper motors in servo mode, StepNet(TM)AC Drives run directly on 115/240 Vac at 7 A peak current and include built-in motion control modes, such as indexing, PVT trajectory tracking, camming, and electronic gearing. Command, Encoder, and Communications interfaces allow user to apply single model to stand-alone and networked architectures and applications. Measuring 146 x 119 x 55 mm,...

Read More »
Microstepping Driver/Controller is RoHS-compliant.
Stepper Motor Controllers and Drives

Microstepping Driver/Controller is RoHS-compliant.

Capable of step resolutions ranging from 2x to 256x, Model R256-RO operates from +12 to 40 Vdc and phase current ranges from 0.1-2.0 A peak. It features fully programmable ramps and speeds, software selectable hold/move currents, 2 user configurable digital I/Os, 1 optical sensor for homing, and 1 switch closure to ground. With ability to store up to 16 different programs at once using built-in 4...

Read More »
Stepper Motor Controllers and Drives

Single Axis Motor Controller features integrated I/O.

Capable of controlling and driving 2- or 4-phase stepper motors, self-contained Centurion performs variety of automation related, motion control, inspection, dispensing, and production applications. It includes 8 digital inputs, 8 digital outputs, operator control panel, remote start and stop, and 32 K battery-backed memory that can store 10 programs and up to 5,000 motion commands. Supplied with...

Read More »
Stepper Motor Controllers and Drives

Microstepping Driver complies with RoHS standards.

Model R208 can provide up to 2.0 A of phase current to any bipolar step motor and change amount of holding current applied to motor. Along with option of setting micro stepping resolution from full step, half step, Â-¼ step, to 1/8 step, driver can utilize 12-24 Vdc power supply to produce constant sinusoidal current waveforms. It features optically isolated step, direction, and disable...

Read More »
Stepper Drives feature point-and-click graphical interface.
Stepper Motor Controllers and Drives

Stepper Drives feature point-and-click graphical interface.

ST10-Si Stepper Drives deliver 24-80 Vdc with output current of up to 10.0 A peak and protect against over-voltage, under-voltage, over-temperature, and external output shorts. They provide 8 digital inputs and 4 digital outputs. Si Programmer(TM) Windows-based software offers graphical point-and-click format that combines motion, I/O, and operator interface functionality. At start up, devices...

Read More »
Stepper Motor Controllers and Drives

Stepper Motor Controller works with bipolar/unipolar motors.

Offered in various packages, LS7290 is programmable for 6 step sizes from full to 1/32 step and offers max stepping rate over 30k/sec. IC works with 2-phase bipolar stepper motors, interfacing with external dual full bridge driver and 4-phase unipolar stepper motors, where PWM and phase control outputs interface with 4 AND gates driving 4 NMOS driver transistors. Inputs are available to control...

Read More »
Stepper Drive utilizes Q programming language.
Stepper Motor Controllers and Drives

Stepper Drive utilizes Q programming language.

With 24-80 Vdc input and output current to 10.0 A peak, Model ST10-Q delivers 8 digital inputs and 4 digital outputs. Q programming language enables users to create and edit stand-alone programs with options for downloading, storing, and executing multiple programs with single drive. Demand Signal Smoothing minimizes extraneous system resonances, while Torque Ripple Smoothing adjusts current...

Read More »

All Topics