Stepper Motor Controllers and Drives

Step Motor Driver/Controller features multi-axis control.
Stepper Motor Controllers and Drives

Step Motor Driver/Controller features multi-axis control.

R364 3-axis driver/controller provides output currents ranging from 0.2-1.5 A/phase peak, with step resolutions from full, Â-½, ¼, 1/8, 1/16, 1/32, and 1/64. Unit can be configured and controlled via ASCII interface over either RS232 protocol for single module control or RS485 for multiple module control. Users can store all motor parameters on board with simple ASCII command. R364...

Read More »
Microstepping Drives suit low noise applications.
Stepper Motor Controllers and Drives

Microstepping Drives suit low noise applications.

Micro Stepping Chopper Drives DCM8028 and DCM8055 use bipolar constant-current chopping technique and feature max input voltage of 80 Vdc. Suited for driving 2-phase step motors with max current ratings of 2.8 and 5.5 A per phase, drives offer mixed decay current control, automatic idle-current reduction, and micro step resolutions from Â-½ step to 1/256. They also offer 14 selectable micro...

Read More »
Stepper Motor Controllers and Drives

Integrated Stepper Motor/Drive saves on installation space.

Based on NEMA size 23 motor matched to integrated drive circuitry, SMD23 package eliminates need to research, specify, purchase, and install 2 separate components. Design facilitates field servicing and simplifies installation through elimination of stepper drive to motor cabling. PC programmable unit reduces potential for problems due to electrical noise, and self-regulating current flow...

Read More »
Micro-Stepper Drive comes in 2.5 x 1.60 in. package.
Stepper Motor Controllers and Drives

Micro-Stepper Drive comes in 2.5 x 1.60 in. package.

StepNet(TM) Micro module drives 2-phase size No. 15-23 stepper motors in CANopen networked, multi-axis systems and can operate as stand-alone motor drive. From PCB-mount package, product employs field-oriented control, electronic damping, and adjustable detent torque compensation. It can deliver 2 A continuous and 3 A peak current, operating from 20-75 Vdc, and uses Java software components to...

Read More »
Open-Loop Stepping System controls position and speed.
Stepper Motor Controllers and Drives

Open-Loop Stepping System controls position and speed.

SureStep(TM) includes 4 motors and one-size-fits-all step motor drive. With holding torques from 83-434 oz-in. in NEMA size 17, 23, or 34 frames, motors operate from 2.8 A/phase. Two-phase, bipolar motors have 200 full steps/revolution or 1.8°/full step. Drive features standard +5 Vdc optically-isolated logic inputs for interfacing with DirectLOGIC PLCs and other controllers/indexers. DIP...

Read More »
Stepper Motor Controller has 2 limit switches per axis.
Stepper Motor Controllers and Drives

Stepper Motor Controller has 2 limit switches per axis.

Available in single- and 3-axis configurations, Stepper Motor Controller Card for PCI bus controls and supports all parameters of bipolar stepper motor, including velocity, acceleration, deceleration, amount of steps, and direction. Card supports 3 synchronization modes and step division up to 1/8 steps. Two end switches and rotation switch that operates in 2 modes can be connected to controller.

Read More »
Stepper Motor Controller has USB interface.
Stepper Motor Controllers and Drives

Stepper Motor Controller has USB interface.

Multifunctional micro-step driver operates bipolar stepping motor by local/remote means. Local control and indication are implemented by 2 knobs and 3 LEDs, while remote control and monitoring are implemented via USB interface from PC. Controller incorporates PWM chopper-type sinusoidal driver, fully integrated mixed-signal System-on-a-Chip MCU, and USB controller on one board. Commands are...

Read More »
Nano Driver reaches 200,000 steps/revolution.
Stepper Motor Controllers and Drives

Nano Driver reaches 200,000 steps/revolution.

Two-phase NanoDrive(TM) SND100 allows engineers to deploy nano positioning steps with resolution selection dip-switch that provides up to 16 different resolution modes from 1/1 to 1/1000. Plug-and-play driver includes power LED, auto current down function, and auto current adjusting volume function for enabling different output currents to meet stepper motor requirements. Pulse Input switch...

Read More »
Step Motor/Driver offers optional built-in encoder.
Stepper Motor Controllers and Drives

Step Motor/Driver offers optional built-in encoder.

SilverPak 17 is a NEMA size 17, 2-phase, 1.8° bipolar step motor with integrated microstepping driver. It features selectable step resolution from full step, Â-½ step, ¼ step, to 1/8 microsteps. Step, direction, and disable inputs are optically isolated. Offered in body lengths of 2.69, 2.92, and 3.24 in., unit operates on 12-24 Vdc and provides up to 85 oz in. holding torque....

Read More »
Microstepping Drives offer servo-like performance.
Stepper Motor Controllers and Drives

Microstepping Drives offer servo-like performance.

Series P7000 Drives use multi-step positioning to convert full step indexing commands into smooth microstepping resolution. They provide Encoderless Stall Detection(TM), down to and including rest, without use of separate feedback device. Available for AC or DC operation, Series P7000 can power any 2-phase NEMA step motor. Current auto-tuning techniques make units suited for single or multi-axis...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers