Stepper Motor Controllers and Drives

Stepping Motor Drivers feature current rating over 2 A.
Stepper Motor Controllers and Drives

Stepping Motor Drivers feature current rating over 2 A.

Toshiba TB6560HQ/FG 2-phase Bipolar Stepping Motor Drivers offer 0.6 W (HQ)/0.75 W (FG) on-resistance through use of BiCD process with thermally dissipative package. Supporting 2-phase/1-2-phase/W1-2-phase/2W1-2-phase excitation modes and forward/reverse mode, units can drive 2-phase bipolar type stepping motors using only clock signal. Input voltage is compatible with 3.3 or 5 V, and motor power...

Read More »
Step Motor Systems offer basic step angle of 0.36°.
Stepper Motor Controllers and Drives

Step Motor Systems offer basic step angle of 0.36°.

RoHS-compliant Series CRK-M consists of 5-phase step motor and driver models, 8 with single shaft extension and 8 with double shaft extension. Basic step angle can be adjusted to achieve any 2-phase step motor step angles. Direct switchover from 2-phase microstep mode can be performed without having to change input pulses. Available frame sizes range from 1.10 in. with holding torque of 5.9...

Read More »
Easy-to-Use Programming Software for Stepper and Servo Drives Features Icon-Based Programming Environment
Stepper Motor Controllers and Drives

Easy-to-Use Programming Software for Stepper and Servo Drives Features Icon-Based Programming Environment

Intuitive instructions make it ideal for all levels of users and requires no software programming experience WATSONVILLE, CA - Applied Motion Products' Si Programmer(TM) Windows-based software version 2.5.14 is now available. Version 2.5.14 supports seven Si-compatible stepper drives, including the new STAC6 drive, as well as three Si-compatible servo drives. Si (Simple Indexer) Programmer...

Read More »
Step Motor incorporates microstepping drive and controller.
Stepper Motor Controllers and Drives

Step Motor incorporates microstepping drive and controller.

Offered in 3.41, 3.85, and 4.78 in. lengths, SilverPak 23C integrates NEMA 23 step motor, microstepping driver, and controller in single unit. Device operates from +12 to 40 Vdc and delivers 3 A peak output current, 294 oz-in. holding torque, and reaches speeds of 16.7 MHz. Features include programmable ramps and speeds; software selectable hold and move currents; up to 256x microstepping...

Read More »
Stepper Motor Controllers and Drives

Technosoft Drives Bring Intelligence to CANopen Networks

26.05.06 The new generation of Technosoft DSP intelligent drives IDM/IDS640 offer a powerful CANopen communication option for motion automation builders currently using the CANopen DSP 402 standard. Technosoft supports the popular CANopen protocol, which has emerged as the dominant CAN solution for motion control applications throughout the world. These intelligent drives embed motion control,...

Read More »
Motor and Driver Package includes smooth drive function.
Stepper Motor Controllers and Drives

Motor and Driver Package includes smooth drive function.

Combining 5-phase stepping motor with low-vibration microstepping driver, CRK Series is available in 0.79, 1.10, 1.65, and 2.36 in. frame sizes. In microstep operating mode, 2.56 x 1.77 x 0.98 in. driver provides 25 preset angle selections up to 250 microsteps per full step. Motors are offered with holding torques from 3.2-230 oz-in. Available with standard tapered hob, planetary, and harmonic...

Read More »
MDrive17Plus with Plus Generation Patented Technology
Stepper Motor Controllers and Drives

MDrive17Plus with Plus Generation Patented Technology

Now with 2nd generation patented technology, the MDrive17Plus Motion Control from IMS provides advanced current control delivering unsurpassed performance and smoothness in a fully integrated microstepping driver/motion controller/NEMA17 high-torque brushless motor design. By applying innovative techniques to control current flow through the motor, resonance is significantly dampened over the...

Read More »
Distributed Motion Control with Technosoft Universal Drive Solution
Stepper Motor Controllers and Drives

Distributed Motion Control with Technosoft Universal Drive Solution

Using MotionChip(TM) DSP Control Technology, Technosoft has developed a family of intelligent, universal drives, based on customer requirements: IDMx40 Intelligent Servo Drives, IDSx40 Intelligent Stepper Drives, IPS110 / IBL2403 Intelligent Minidrives, ISM4803 / ISCM4805 Intelligent Control Modules. These high-performance intelligent products represent a true universal drive solution covering...

Read More »
Stepper Motor Controllers and Drives

Stepper Drives operate within Q programming environment.

STAC6-Q Stepper Drives provide current output from 0.5-6.0 A with 90-135 Vac input, 50/60 Hz, and provide software selectable resolutions from 200-51,200 steps/rev at speeds up to 133 rps. Self-test and auto setup features measure and configure motor parameters, while anti-resonance technology eliminates midrange instability for high motor speeds. Q programming language offers options for...

Read More »
Stepper Motor Controllers and Drives

Integrated Motor/ Driver/Encoder operates at 15-48 Vdc.

SilverPak 23DE integrated NEMA 23, 1.8° bipolar step motor, microstepping driver, and encoder suits step motor applications needing high torque. Integrated motor/driver produces up to 294 oz-in. of holding torque. Available phase current ranges from 0.3-3 A peak. It has features such as Pole Damping Technology(TM), under-voltage and over-temperature protection, and 4 selectable damping...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics