Steel

Assemblies

Stainless Steel Strip & Coil

Source21 can supply your custom processed stainless steel in regular or exotic grades. They not only stock numerous grades of stainless steel coil and strip at their processing facilities nationwide, they offer high quality processing of your strip and coil so that your stainless steel arrives at your production facility in a timely and ready-to-use manner. Source21 stocks 300 series annealed and...

Read More »
Rolling Mills

Rolling of Strip and Coil

Source 21 uses modern rolling techniques to reduce the gauge (thickness) of stainless steel coil sheet to your specifications. Their rolling process produces high quality stainless steel with a consistent gauge to prevent weak spots or deformation. Additionally, they offer temper rolling of stainless steel coil and strip. When drawn or formed, many steels will exhibit unwanted strain lines....

Read More »
Steel

ATI 2003® Lean Duplex Alloy Selected for North Sea Project

First use for offshore topside structural components PITTSBURGH - Allegheny Technologies Incorporated (NYSE: ATI) announced today that ATI 2003® lean duplex stainless has been selected as the material of choice for a full array of offshore topside structural components. ATI 2003 lean duplex stainless was chosen over 316L stainless and coated carbon steel for topside secondary and outfitting...

Read More »
Steel

CPM® Powder Metal Tool Steel for Demanding Applications Is Available from Diehl Steel

CINCINNATI, OH - Diehl Steel stocks and sells a wide variety of grades of CPM powder metal tool steel designed for customer's most demanding applications. The CPM process produces more highly alloyed grades of steel which cannot be produced by conventional steelmaking. The process results in a very fine, more uniform carbide distribution and imparts improved toughness and grindability, superior...

Read More »
EDM Blanks are pre-hardened, squared, and ground.
Blanks

EDM Blanks are pre-hardened, squared, and ground.

Available in many popular tool steel grades including AISI A-2 and D-2 (RC 58-62), Ready-Block EDM Blanks are each precision machined to specific thickness, width, and length, within +.010/.020 in. tolerance. Blanks are then hardened and tempered to standard hardness. Starter hole is included at customer's request.

Read More »
Steel

Docol 1400 MZE - the Safest Ultra High Strength, Electro Galvanized Steel for the Automotive Industry

Sweden: To meet increasingly stricter demands from the automotive industry, the popularity of Ultra High Strength Docol MZE steels from SSAB, which feature an electro galvanized coating, have increased rapidly. Now, the next generation of these steels, Docol 1400 MZE, is providing automotive manufactures with a way to take safety, innovation and cost-efficiency to a new level. Docol MZE – Ultra...

Read More »
Steel

Strip Steel Grades include hot-rolled, cold-formed variants.

Part of steel family that includes strength levels from 220–1100 MPa, Domex 900/960 and Domex 1100, representing hot-rolled and cold-formed steel, help reduce weightÂ- while increasing strength and durability in such applications as parts for cranes, building structures, trailer chassis, agricultural and forestry machinery, and utility vehicles. High-strength strip steel...

Read More »
Bainbridge Expands Product Line as Exclusive U.S. Distributor
Boats (Marine)

Bainbridge Expands Product Line as Exclusive U.S. Distributor

CANTON, Massachusetts - Bainbridge International has extensively broadened their marine products line by securing the exclusive U.S. distribution rights of British based Allen Brothers Hardware. Allen's line includes the widest range of sailboat hardware that combines reliability, efficiency and strength, with exceptional value. They have worked with the world's leading designers and sailors to...

Read More »
New Threaded Rods from aMsp Available In Brass, Mild Steel, and Stainless Steel
Threaded Rods and Bars

New Threaded Rods from aMsp Available In Brass, Mild Steel, and Stainless Steel

New Hyde Park, NY -- All Metric Small Parts (aMsp), a leading provider of metric hardware components, has announced the availability of 20 off-the-shelf metric DIN 975 threaded rods. Identified as the MKAABMM... Series, these rods are available in Brass, Mild Steel, and Stainless Steel of the highest quality that conforms to DIN 975. They are priced by the meter (39.37 in.) and available upon...

Read More »
Steel

Diehl Steel Ships In-Stock A-2 Air Hardening Tool Steel within 24-48 Hours

CINCINNATI, OH - Diehl Steel A-2 air hardening tool steel offers good wear resistance and machinability, high compressive strength and very good non-deforming properties. The company typically ships in-stock items within 24-48 hours. Available in flats, hollowbar, rounds, squares, metric and standard forms, A-2 tool steel from Diehl also features deep hardening and high dimensional stability...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers