LED Integrated Standoffs enhance signage and displays.
Available in polished and matte chrome, aluminum LED Standoffs for Signage and Displays consume .4 W per unitÃ- and output 40 lm. Concept utilizes acrylic or Plexiglas sign holders to which standoffs have been affixed as medium to diffuse backlit illumination to mounted graphics, posters, and promotional messages. Six cool white (6,000K–6,500K) LEDs are integrated in between body of...
Read More »
Metric Male-Female Standoff
Micro Plastics is now offering a line of METRIC MALE/FEMALE STANDOFFS molded in a Nylon 6/6 material. Standoffs are resistant to vibration, abrasion and corrosion. They are electrically insulating, non-magnetic and have a high strength to weight ratio. These threaded Male/Female Standoffs are 6mm to 25mm long. They are offered in three thread sizes, M3 x 0.05, M3.5 x 0.6, and M4 x 0.7. Micro...
Read More »
Mounted Permanently in Thin Metal Sheets: PEM-® Concealed-Head Clinch Studs and Standoffs Promote Flush Assemblies
PEM-® concealed-head self-clinching studs and standoffs can be permanently mounted in steel or aluminum sheets as thin as .062 /1.6mm to provide strong and reliable threads for attachment applications. These fasteners further promote flush assemblies due to their concealed-head capability, which allows the side of the sheet opposite installation to remain smooth and unaffected by the fastening...
Read More »Self-Clinching Threaded Standoffs install close to edges.
Installed flush in steel or aluminum sheets as thin as .037 in. with centerline-to-edge distances of .126 in. min, PEMÃ-® Type DSOS standoffs offer method for stacking or spacing components in assembly. Stainless, RoHS-compliant products suit limited-space applications and feature reusable metal threads to provide secure attachment and enable component disassembly when required. They come in...
Read More »
Fastener Technical Resource Guide
This fastener technical resource guide will show you how to specify nuts, points, heads, washers and more.
Read More »PCB Spacers provide shock and vibration protection.
Along with flexible rubber center, standoffs in HSCBS Series feature flexible tension wings on ends that provide additional shock protection. They accommodate panel thicknesses from .031-.078 in. Natural-colored ends are molded in flame-retardant Nylon 6/6 UL94 V0 material, and center spacer is of black TPE material. Both materials are RoHS-Compliant, and part design facilitates installation by...
Read More »
Standoffs feature stackable design.
Available in No. #4, #6, and #8 screw sizes and lengths from 1/8-1 in., Stackable Snap-In Standoffs are molded in Nylon 6/6 material, and are also available in UL94-V0 Nylon. Units snap into board and maintain spacing when screw is removed. They are self-aligning and self-retaining to provide screw insulation in multi-level applications.
Read More »
Stand-Offs mount peripheral devices for automated processes.
Welded and Cast Stand-Offs are offered in carbon steel and aluminum for industrial applications, as well as in stainless steel for medical and semiconductor automation processes. Units feature parallelism accurate within .002 in. over 6 in. run. They come in standard sizes or in configurable sizes to 0.010 in. increments, with riser plates and custom hole patterns or surface treatments also...
Read More »
Male/Female Standoff is molded in nylon 6/6 material.
Included in company's line of circuit board hardware, Male/Female Standoff is molded in natural nylon 6/6 material with UL94V2 rating. Part is offered with 6-32 thread and has board space of 3/8 in.
Read More »Broaching Fasteners are suited for use in or with PCBs.
PEMÃ-® broaching fasteners meet component-to-board, board-to-board, and board-to-chassis production-fastening needs. They can be used with all types of PCBs as well as with acrylic and polycarbonate components. Fastener family installs permanently and includes broaching nuts with permanent threads; threaded or unthreaded standoffs; threaded studs; all-metal standoffs featuring spring action;...
Read More »
Electronic Hardware is made to NAS standards.
Consisting of standoffs, spacers, swage spacers, and male/female standoffs, electronic hardware is manufactured to U.S. National Aerospace Standards (NAS) and is available in various styles, sizes, materials, and finishes. Designers can also obtain NAS series 42, 43, 61, 1786, 1829, 1830, and 1831 components.
Read More »
Optimize Your Storage or Distribution Facility with Steel King Rack Solutions
Steel King racks are designed to meet seismic requirements in the most demanding conditions. Our durable storage products help your company save on maintenance costs. Check out our product video or download our Rack Planning eBook to learn more.
Read More »
