Standoffs and Spacers

Trelleborg Set to Exhibit Industry Leading Solutions at ONS 2012
Spacers

Trelleborg Set to Exhibit Industry Leading Solutions at ONS 2012

Leading global manufacturer of polymer, syntactic foam and rubber-based solutions for the offshore industry, Trelleborg, will be showcasing a wide range of industry leading solutions specifically designed with the offshore energy market front of mind at ONS 2012, the biennial international energy event. As well as exhibiting a number of its already well established products at the show,...

Read More »
Spacers

Fully Automated Inspection System for Glass Micro-Parts: ~ 100% Inspection for Ultra-High Volumes

San Diego, California - Rayotek Scientific, Inc, in partnership with a national optical inspection instrument company, has successfully engineered a QA optical inspection system that can inspect glass micro-parts in very high volumes. The system is modularized to make it easily scalable, allowing for 100% cosmetic and dimensional inspection of billions of parts/year. This novel inspection system...

Read More »
Spacer Cable Systems enhance limited-space substations.
Spacers

Spacer Cable Systems enhance limited-space substations.

Intended for substation applications, Spacer Cable Systems consist of messenger cable that supports structure, polyethylene spacers to hold cable across spans, and covered conductor cable. Spacer cable reduces right-of-way requirements at substation exits, promotes efficient use of limited space in substations, and increases reliability on critical feeder circuits at substation exits. After being...

Read More »
Steel Fasteners can be used as nuts or standoffs in SMTapplications.
Standoffs

Steel Fasteners can be used as nuts or standoffs in SMTapplications.

Featuring hex-shaped barrel, ReelFast® microPEM(TM) Type SMTSO(TM) Fasteners install permanently on PCBs in same manner and at same time as other surface mount components prior to automated reflow solder process. Fasteners come in thread sizes as small as No. 0-80 with lengths as short as 0.62 in., and all can be installed in boards as thin as .020 in. Packaged on 13 in. recyclable reels,...

Read More »
Spacers

Richco, Inc. Releases PSE

Richco, Inc. is proud to announce the release of its new PCB push spacer, the PSE. The PSE allows for easy access to the underside of the PCB, with no through holes required. Its sturdy construction also supports heavily loaded PCBs. The PSE is available in two spacer lengths and is offered in two different materials: UL94 V2 and UL94 V0. The PSE is RoHS compliant. To review the PSE or other...

Read More »
WAC Lighting to Unveil New LED Lighting Designs at 2012 Lightfair International
Electronic Drivers

WAC Lighting to Unveil New LED Lighting Designs at 2012 Lightfair International

Las Vegas - Continuing to lead the industry with the state of the art solid-state lighting technology, WAC Lighting will unveil many new lighting designs at 2012 Lightfair International. WAC will exhibit its line at Booth 1614 in the Las Vegas Convention Center from May 9 through May 11. WAC's LED luminaires offer improved beauty, energy efficiency, sustainability, safety and performance. These...

Read More »
Spacers/Standoffs have rugged, insulating design.
Standoffs

Spacers/Standoffs have rugged, insulating design.

Made of studs and inserts molded in nylon body, Transipillars provide durable, insulated spacer system for board-to-board stacking or board-to-chassis mounting. Studs and inserts, made of galvanized steel and brass, are available in stud/stud, stud/insert, or insert/insert configurations with cylindrical or hexagonal body form. Pillar come in 13-64 mm lengths and can also be customized. Voltage...

Read More »
Clamp/Spacer ensures track parallelism.
Spacers

Clamp/Spacer ensures track parallelism.

Track Clamp provides defined track spacing to assure track parallelism. Set screws lock track in place, eliminating need for mounting holes, and design acts as stand-off to prevent build up as well as facilitate cleaning in contaminated or wash-down environments.

Read More »
Small, Secure Fasteners accelerate compact electronics assembly.
Standoffs

Small, Secure Fasteners accelerate compact electronics assembly.

Intended for spacing applications, PEM® Type MSO4(TM) self-clinching standoffs are manufactured from 400 Series stainless steel with threads as small as No. 00 and come in lengths as short as .080 in. PEM® Type MPP(TM) self-clinching micro pins, used for locating/positioning applications, are manufactured from age-hardened A286 stainless steel and designed with diameters as small as...

Read More »
Nylon Spacers and Washers are constructed to grip screw shanks.
Spacers

Nylon Spacers and Washers are constructed to grip screw shanks.

Featuring IDs that are configured to grip screw shank, nylon spacers and washers slide with minimal effort onto screws while ensuring secured retention via screw threads. Spacers accommodate No. 4, 6, 8, and 10 size screws in body lengths from .125-1 in. in increments of .125 in., while washers accommodate No. 2, 4, 6, 8, and 10, .250 and .375 in. screws with thickness of .032 or .062 in.

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers