Spray Guns

Spray Guns

Sioux Announces Acquisition of Three New Product Lines from Walters Manufacturing

Sioux Corporation is pleased to announce the acquisition of three product lines from Walters Manufacturing of Watsonville, California. The product lines are the Walters SteamGun(TM), Walters SafeSteam(TM), and Walters SteamPro(TM). Sioux will be the exclusive manufacturer for each line. Steam Guns: Walters Steam Guns(TM) are the finest steam and pressure wash guns on the market! These guns are...

Read More »
Airless Spray Gun handles extreme pressures up to 5,000 psi.
Spray Guns

Airless Spray Gun handles extreme pressures up to 5,000 psi.

Weighing 14 oz, Model XTR-5 can spray single-component, plural-component, and industrial high solids coatings. It includes EasyGlide(TM) swivel for hose and gun movement under high pressures, and Easy Out(TM) gun filter for minimized tip plugging. Variety of handle and trigger options are available to maximize operator comfort.

Read More »
Spray Guns

Binks and DeVilbiss Brands to Showcase Broad Range of Wood Finishing Equipment at the 2007 Association of Woodworking and Furnishings Suppliers Fair

June 2007, Glendale Heights, IL - ITW Industrial Finishing, manufacturers of Binks and DeVilbiss industrial spray finishing equipment, will be featuring a number of wood finishing spray guns, pumps, and outfits at the 2007 Association of Woodworking and Furnishings Suppliers Fair (AWFS), taking place Wednesday, July 18 through Saturday, July 21 at the Las Vegas Convention Center in Las Vegas,...

Read More »
Cartridge Guns are used for spray-on linings.
Spray Guns

Cartridge Guns are used for spray-on linings.

Designed to handle smaller applications, spot repairs, or hard to reach areas, RhinoPro(TM) Cartridge Gun 600 accepts dual 300 ml size cartridges, while RhinoPro(TM) Cartridge Gun 1500 accepts for dual 750 ml cartridges. Lightweight and portable guns require only small air compressor, and feature regulator, over-pressure safety system, automatic and manual return, and heavy-duty plunger body.

Read More »
Spray Guns

Devilibss to Showcase New Family of Compact Performance Spray Guns at AWFS

April, 2007, Glendale Heights - DeVilbiss will be demonstrating its new Compact Performance Series spray guns at the Association of Woodworking & Furnishings Supplier (AWFS) Fair at the Las Vegas Convention Center from July 18-21. The DeVilbiss family of Compact spray guns is built for energy savings, ergonomic comfort, and superior transfer efficiencies. Each spray gun is available in three...

Read More »
The New Rear Entry Trigger Gun AL7 Introduced by A.R. North America
Spray Guns

The New Rear Entry Trigger Gun AL7 Introduced by A.R. North America

The new Rear Entry Trigger Gun AL7 introduced by A.R. North America will handle up to 10 GPM and pressure up to 4000 PSI. It is available as the cold water version AL7 gun, which can handle water temperatures up to 140° F., and as the hot water AL7H, for up to 300° F. Rental Duty Trigger Guns with 3/8 F inlets, and Â-¼" F outlets. Contact Name: Kyle Notch Title: Marketing Manager...

Read More »
Spray Guns

Manual Spray Guns optimize transfer efficiency rates.

Designed using CFD technology to model passageways and air caps to reduce turbulence and enhance atomization process, Compact Performance Series Spray Guns are offered in suction, pressure, and gravity feed versions. Conventional, HVLP, and Trans-Tech Spray Models feature brass air caps and SS fluid tips and needles that are compatible with all industrial spray coatings. Forged aluminum alloy gun...

Read More »
Spray Guns

Binks to Showcase Depth of Guns, Pump Options at Upcoming IBEX 2006 Trade Show

October, 2006, Glendale Heights - Binks will be featuring its Air Assisted Airless LEL (Low Emissions Laminators) Gel-Coat and chopper equipment, and the Boss High Volume FRP Pump at the upcoming IBEX 2006 Show, being held at the Miami Beach Convention Center from November 1-3. IBEX is dedicated to the next generation of boatbuilding technologies. Show attendees will be able to learn about Binks...

Read More »
Electrostatic Spray Guns are designed for efficiency.
Spray Guns

Electrostatic Spray Guns are designed for efficiency.

Vector Systems optimize atomization and transfer efficiency through Vector gun design that redistributes pressure in air cap and adjusts balance between atomization and fan air. While reduced-weight design lends to operator comfort and reduces fatigue, weight distribution optimizes balance and ergonomics. Guns incorporate minimal parts for reduced likelihood of failure and maintenance. Oversized,...

Read More »
Automatic Spray Gun is suited for UV-coating applications.
Spray Guns

Automatic Spray Gun is suited for UV-coating applications.

Used in wood and metal industries, MAG AA UV Spray Gun employs carbide needle, leak-resistant carbide seat, and solvent-resistant O-rings. It supports atomization of various coating viscosities and features stainless fluid passages for water- and solvent-based materials. While wood industry applications include cabinets, flooring, milled products, and doors, metal industry applications include...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers