New 220v Electrical Smart Splitter is UL Listed
Works with all plug-in electric vehicles, electric vehicle chargers, and 220-volt appliances. Residential solar companies, auto manufacturers, and EV charging companies can provide customers with home Level 2 charging access. Designed to provide fast, easy, and affordable home electric vehicle charging access.
Read More »
New GFCI Receptacle Testers to Test Circuit Wiring and Connected Electrical Devices
ET100 can pinpoint wiring faults in NEMA 5-15 receptacles used in residential and commercial sites. ET200 line splitter can be used with a clamp meter to measure current loads up to 15 A without splicing wires or other modifications that permanently alter a device’s power cord. Enables a clamp meter to capture direct current readings for typical current loads while an X10 position can be used...
Read More »
New TPE Jacketed Cables Resist Thermal Shocks and Weld Sparks
Cables are available in lengths from 0.3 m to 2.0 m with multiple connector types. Features silicone tube over molded into the head to prevent ingress. Splitters provide high-level protection of cables to I/O blocks mounted in a weld area.
Read More »
New Smart Power GNSS Signal Splitters Available with TNC or Type-N Connectors
TW162 and TW164 offers system redundancy and fail-over capability. Packaged in a robust, compact, lightweight and water-proof (IP67) corrosion-protected aluminum housing. Supports GNSS spectrum GPS/QZSS-L1/L2/L5, QZSS-L6, GLONASS-G1/G2/G3, galileo-E1/E5a/E5b/E6, BeiDou-B1/B2/B2a/B3 and L-band correction service frequency band.
Read More »
Ergonomics Is Good Economics
While you don't need an MD to know that ergonomic designs are good for physical health, you probably didn't realize that these designs can actually be good for your economic health too.
Read More »
New HDMI Splitters Extend Signals up to 30 ft.
Available in 2-port and 4-port models. Enable an HDMI signal to be distributed to multiple displays of different resolutions. Supports HDR resolutions up to 4096 x 2160 at 60 Hz for crystal-clear true 4K video.
Read More »
VadaTech Presents VPX981 Optical Amplifier/Splitter Module That Features Blind-Mate Optical Interconnect
Designed for use in 6U OpenVPX platforms that require signal distribution over fiber. Offers power matching outputs between ±1 dB and optical I/O over single mode 1551 nm fibers. Suitable for embedded computing, radar and electronic systems.
Read More »
New VOPEX 4K HDMI Splitter/Extender Supports DDC2B Protocol
NTI’s VOPEX-C64K18GB-4 4K 60Hz 4:4:4 HDMI Splitter/Extender consists of 4K HDMI HDBase-T broadcast unit and receiver for each remote 4K HDMI display. Unit distributes uncompressed HDMI video, multi-channel audio from one source to up to four displays and speakers. Splitter’s CAT5e/6/6a/7 cable provides resolutions of 4K x 2K 60Hz (100 ft), 4K x 2K 30Hz (165 ft) and 1080p (200 ft). Unit offers...
Read More »
New uBSP microBlox Signal Splitters are Suitable for Complex Applications
Acromag’s uBSP microBlox® Signal Duplicators/Splitters are used as carrier for signal conditioning modules to drive two scalable 4-20mA or 0-10V control outputs and auxiliary 5V third output from a single input. Units come with a USB port that allows user to customize I/O ranges and scaling. The splitters can be operated from 40 to 75°C temperature range with 6-32V DC power sources and meet...
Read More »
New SP330 Series Signal Splitter/Duplicators Feature Common USB Port for Set Up
SP330 Series Signal Splitter/Duplicators feature removable terminal blocks, metal spring-loaded DIN rail clip. Units are operated on 6-32V DC power sources in -40 to 75°C temperature range and are certified to UL Class 1 Div 2, ATEX Zone 2 and IECex standards. The splitters support ±20mA or 0-20mA DC inputs and 0-20A AC signals and the thermocouple units accepts J, K, T, R, S, E, B, N sensor...
Read More »
iBOS® Charger-Splitter™ Reduces Number of Charges Needed
iBOS® Charger-Splitter™ allows user to charge two batteries sequentially using a single charger when integrated with iBOS® battery room management system. The unit is used in mid- to large-sized battery rooms and reduces the cost of charging to the half.
Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.
Read More »
