Splicers

Splicing Machine has compact, clamshell design.
Splicers

Splicing Machine has compact, clamshell design.

Engineered for non-stop packaging and converting, CS1214 Splicer has clamshell mechanism that opens 90° into horizontal plane to provide flat work table for prep work. Dual unwind shafts for supply rolls are located at bottom of machine, and 36 in. length allows placement in space-restricted areas. Able to accommodate 2 full 14 in. dia rolls, machine also employs Splice-at-any-speed System...

Read More »
Elevator Belt Splice is constructed of solid-duty aluminum.
Splicers

Elevator Belt Splice is constructed of solid-duty aluminum.

TITAN Ultimate Belt Splice is suited for thick elevator belts used in large export river terminals or 24-hr processing plants. Central aluminum vice-grip section is bracketed by 2 exterior aluminum clamps. Belt ends bend through 75 mm radius to 90° angle, employing clamp force and friction to secure load. To prevent wear due to pressure or friction generated during operation, central wedge...

Read More »
Electrical Connectors

ILSCO Achieves NEBS Level 3 Approval

ILSCO®, a manufacturer of industrial and specification grade compression and mechanical lugs is pleased to announce that ILSCO's line of SureCrimp® copper compression connectors and splices were tested by Telcordia and meets NEBS Level 3 Criteria. ILSCO offers the largest selection of copper compression connectors that meets NEBS Level 3 Criteria, accepts both building wire and flex...

Read More »
Splicers

Sonobond Announces Plans to Exhibit Two Ultrasonic Units at the Assembly & Automation Technology Expo, September 20-22, 2011.

The Dual Head SpliceRite(TM) Ultrasonic Wire Splicer and the SeamMaster(TM) High Profile Textile Bonder are leading examples of Sonobond's innovative technology. Both machines will be on display at Chicago's McCormick Place North, Booth #1147. WEST CHESTER, Pennsylvania - Melissa Alleman, Vice President of Sonobond Ultrasonics, announced today that the company will be exhibiting two examples of...

Read More »
Sonobond Announces Plans to Exhibit Two Ultrasonic Units at the Assembly & Automation Technology Expo, September 20-22, 2011.
Friction / Fusion Welders

Sonobond Announces Plans to Exhibit Two Ultrasonic Units at the Assembly & Automation Technology Expo, September 20-22, 2011.

The Dual Head SpliceRite(TM) Ultrasonic Wire Splicer and the SeamMaster(TM) High Profile Textile Bonder are leading examples of Sonobond's innovative technology. Both machines will be on display at Chicago's McCormick Place North, Booth #1147. WEST CHESTER, Pennsylvania, July 20, 2011-Melissa Alleman, Vice President of Sonobond Ultrasonics, announced today that the company will be exhibiting two...

Read More »
Copper Cable Splice Kit speeds installation of watertight connections.
Splicing Kits

Copper Cable Splice Kit speeds installation of watertight connections.

Meeting/exceeding ANCI C119.4 standards, Homac® Copper Flood-Seal® Compression Splice Kits do not require any heat guns, pull cords, cutting, or taping to install watertight seal. Pre-lubricated, sized, single-piece cover slides on and locks in place, facilitating copper-to-copper splice connections. Providing 4-step installation, kits are available in wire sizes No. 2, 1/0, 2/0, 3/0, 4/0,...

Read More »
Splicers

Vytran to Showcase Optical Fiber Processing Equipment at LASER World of PHOTONICS 2011

Attendees Can See Ongoing Vytran Product Demos at the New Munich Trade Fair Centre in Munich, Germany, from May 23-26, 2011 Morganville, New Jersey - Vytran, an innovative supplier of optical fiber splicing and processing solutions, will showcase its optical fiber processing equipment at LASER World of PHOTONICS 2011 from May 23-26, 2011, at the New Munich Trade Fair Centre in Munich, Germany....

Read More »
Splicers

Vytran to Demonstrate Array of Optical Fiber Processing Tools at OFC/NFOEC 2011

Morganville, New Jersey - Vytran, an innovative supplier of optical fiber splicing and processing solutions, will demonstrate an array of its optical fiber processing equipment at the Optical Fiber Communication Conference and Exposition/National Fiber Optic Engineers Conference 2011 (OFC/NFOEC) in Los Angeles, California, from March 8-10, 2011. The demos will include individual process tools and...

Read More »
Only Sonobond's Ultrasonic Dual Head SpliceRite(TM) Can Confidently Weld Large Wire Bundles - Even Those with Cross-Sectional Areas of Up to 100 sq. mm.-in Just One Pulse
Friction / Fusion Welders

Only Sonobond's Ultrasonic Dual Head SpliceRite(TM) Can Confidently Weld Large Wire Bundles - Even Those with Cross-Sectional Areas of Up to 100 sq. mm.-in Just One Pulse

Wire harness manufacturers rely on this Sonobond technology because no other ultrasonic metal welder equals its capacity. Even lightly tinned or oxidized wires can be accommodated. WEST CHESTER, Pennsylvania, February 17, 2011-Sonobond Ultrasonics continues to be the leader in ultrasonic welding technology for wire harness assembly. In discussing the popularity of Sonobond equipment for such...

Read More »
Friction / Fusion Welders

Ultrasonic Dual Head SpliceRite

Only Sonobond's Ultrasonic Dual Head SpliceRite(TM) Can Confidently Weld Large Wire Bundles-Even Those with Cross-Sectional Areas of Up to 100 sq. mm.-in Just One Pulse. Wire harness manufacturers rely on this Sonobond technology because no other ultrasonic metal welder equals its capacity. Even lightly tinned or oxidized wires can be accommodated. WEST CHESTER, Pennsylvania, -Sonobond...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers