Splicers

New Branson Ultrasonic Wire Splicer is Embedded with Patented Anti-Splice Technology
Splicers

New Branson Ultrasonic Wire Splicer is Embedded with Patented Anti-Splice Technology

Emerson’s Branson UWS40 Ultrasonic Wire Splicer consists of compact actuator, a controller/power supply, and a 22 in. capacitive touchscreen interface. Unit monitors and records data for each weld time and conducts statistical analysis to track weld performance trends. UWS40 monitors splice parameters such as time, power, pre-height and final height of each splice. Unit comes with in-line...

Read More »
Fiber Fusion Splicer offers X and Y views.
Splicers

Fiber Fusion Splicer offers X and Y views.

Fiber Fusion Splicer consists of 3-in-1 cutting for rubber-insulated wire and multi-functional 1+ N optical fiber fixtures. Unit comes with 400x magnification and supports auto and manual splicing modes. Product offers resistance against wind and dust and comes in a weather proof case. Splicer offers average splice time of 10 seconds and average tube-heat time of 30 seconds. This device provides...

Read More »
Butler Automatic to Highlight SP1 and SP3HSL Automatic Film Splicers at PACK EXPO 2017
Splicers

Butler Automatic to Highlight SP1 and SP3HSL Automatic Film Splicers at PACK EXPO 2017

Visit Booth #3916 to learn how film splicers increase overall equipment efficiency Middleborough, MA. Butler Automatic, the inventor and global leader of automatic splicing solutions, announces that it will showcase its SP1 and SP3HSL Automatic Film Splicers at PACK EXPO 2017, to be held September 25-27, 2017, at the Las Vegas Convention Center in Las Vegas, NV. Butler Automatic experts will be...

Read More »
Peristaltic Pump Vs. i-FILL® Technology
Sponsored

Peristaltic Pump Vs. i-FILL® Technology

Intellitech's advanced i-FILL® pumps are used by companies working in some of the world's most demanding sectors, delivering innovative, highly accurate and repeatable results, ensuring ultimate reliability and ease of use for all of our clients.

Read More »
800-PB-VF- 36 Splicer comes with web break detector.
Splicers

800-PB-VF- 36 Splicer comes with web break detector.

Allowing non-stop production for rolls up to 36 in. diameter and weighing up to 900 lb, 800-PB-VF- 36 Semi-Automatic Splicer features turret design for easy roll lifting directly from floor. Designed with splice table pivots, PLC control and tape dispenser, unit’s splice prep signal tells operator when to load new roll. Using festoon feedback to pneumatic braking system, product offers precise...

Read More »
Butler Automatic SP1 Automatic Film Splicer Reduces Downtime in Consumer Packaged Goods Packaging
Splicers

Butler Automatic SP1 Automatic Film Splicer Reduces Downtime in Consumer Packaged Goods Packaging

Splicer performs non-stop film changes in CPG packaging operations Middleborough, MA - Butler Automatic, the inventor and global leader of automatic splicing solutions, announces that its SP1 Series Automatic Film Splicer is ideally suited towards consumer packaged goods (CPG) packaging applications. The SP1 Automatic Film Splicer increases efficiency in packaging operations by eliminating the...

Read More »
Sonobond's Ultrasonic Technology Meets ABYC Standards for Electrical Systems in Marine Applications
Splicers

Sonobond's Ultrasonic Technology Meets ABYC Standards for Electrical Systems in Marine Applications

Unique Wedge-Reed System Durably Welds Tin-Coated Wires and Terminals While Preserving Protective Properties WEST CHESTER, Pennsylvania, March 28, 2017 – Marine motors present especially demanding conditions for electrical systems. Constantly exposed to high humidity, their performance relies on the protective properties of tin-coated copper wiring. “Only Sonobond Ultrasonics’ technology...

Read More »
Butler Automatic Film Splicers Increase Profitability and Reduce Lead Time for Reclosable Packaging
Splicers

Butler Automatic Film Splicers Increase Profitability and Reduce Lead Time for Reclosable Packaging

With automatic splicing, pre-applied zipper film is easy to incorporate into existing packaging lines Middleborough, MA– Butler Automatic, the inventor and global leader of automatic splicing solutions, announces that its film splicers such as the SP1 Automatic Splicer make pre-applied zipper film easy to incorporate into existing packaging lines. As a result, these splicers greatly increase...

Read More »
Mechanical Pin Splice
Splicers

Mechanical Pin Splice

“Ideal for quick timing belt installation” Not for Drive Belts Urethane Timing Belt Pitches • T5, T10, T20, AT5, AT10, AT20 • L, H, XH • HTD: 5M, 8M, 14M • STD: 5M, 8M, 14M Available Belt Widths Varies depending on the belt pitch. Please contact our sales department. Benefits • Easily installed by hands and pliers in seconds. • Increases profitability by reducing machine downtime...

Read More »

All Topics