Viscometers are offered with high-shear spindles.
Viscometers

Viscometers are offered with high-shear spindles.

CAP Cone and Plate Viscometers are offered with spindles that provide shear rates from 10 sec-1 to 13,300 sec-1. Designed to test sample volumes of less than 1 mL, CAP 1000+ and CAP 2000+ Viscometers offer temperature control from 5 to 235°C. Test applications include architectural and automotive paints and personal care products such as shampoos and conditioners.

Read More »
Grinding Spindles are offered in 100-170 mm diameters.
Machine Spindles

Grinding Spindles are offered in 100-170 mm diameters.

GNS cartridge grinding spindles are available with steel or ceramic bearings and can be air-oil or grease lubricated. Offerings include through-shaft cooling, HSK tool attachment, and speed sensors. Components feature case-hardening and tempering treatments that prevent wear and loss of precision. Appropriate for working with steel, aluminum, and other metals, products are available with speeds...

Read More »
Machine Spindles

Spindle accelerates to 6,000 rpm in less than 1 sec.

Direct-drive Series ASR provides angular positioning and velocity control for applications such as disk-drive testing, imaging applications, and precision wafer inspection. Balanced to ISO 1940 G 1.0 tolerances, design uses labyrinth-type sealing to minimize particle migration from spindle. Features include brushless servomotor; precision ABEC-7 angular-contact bearings; total radial error motion...

Read More »
Choosing the Right Material for Your Project
Sponsored

Choosing the Right Material for Your Project

When choosing an appropriate metal material, the range of options is so broad that selecting the correct material for your unique application can be challenging. Different metals have characteristics that can affect weldability, ductility, and formability. Our new eBook outlines the unique properties and applications of popular metals including: Stainless Steel Brass Aluminum Copper Titanium

Read More »
Spindle Assemblies suit various industrial applications.
Machine Spindles

Spindle Assemblies suit various industrial applications.

Ready-to-install Precision Miniature Spindle Assemblies provide precise running geometry and include stainless steel ABEC 5 or 7 bearings bonded in place under pre-load, lubricated with special grease for low noise and longevity. Multiple shaft configurations are available, offered in stainless steel with aluminum housings. Products are suited for industrial encoders, medical instrumentation, and...

Read More »
Machine Spindles

Upgrade Kit improves drilling machines.

Spindle Upgrade Kit allows Uniline Series single-station drilling machines run spindle speeds up to 150,000 rpm. It contains spindle covering full range from 20,000-150,000 rpm, all electronic components for integration of spindle, as well as software modifications to enable enhanced capabilities in controller.

Read More »
Spindles utilize motorized bearing technology.
Machine Spindles

Spindles utilize motorized bearing technology.

Aerostatic Colibri ZAL Series Spindles feature axial stiffness of 7 N/Â-µm, radial stiffness of 5 N/µm, speed of 80,000 rpm, and low run out of 0.2-0.5 µm. They can be used in vertical or horizontal positions. Compact 1050 W spindles produce up to 0.125 Nm of torque. They include Coals contactor for precise position of tool above work surface, and in-process water injection...

Read More »
Spindles improve scanning of semiconductor wafers.
Machine Spindles

Spindles improve scanning of semiconductor wafers.

Series BER utilizes Motorized Bearing Technology and offers speeds to 10,000 rpm, low runout from 0.2 to 0.5 Â-µm, clean room compatibility, integral encoder, through-the-shaft vacuum, and self-cooling. Balanced to G 0.4 standards, spindles have high stiffness of 7 N/µm axial and 10 N/µm radial. Units are 120 mm in diameter and 190 mm long. They provide power output of 550 W...

Read More »
Spindle features motorized bearing for high stiffness.
Machine Spindles

Spindle features motorized bearing for high stiffness.

Model BOH 80 2.1 D 60 brushless, aerostatic spindle incorporates Motorized Bearing Technology and is available with either collet for tools with 0.5 mm shaft or Dorn taper for extreme accuracy. Spindle offers high stiffness of 9 N/microns axial and 14 N/microns radial with speeds to 60,000 rpm. Unit is balanced to G 0.4 standards and is suitable for dicing semiconductor wafers.

Read More »
Machining Center offers high torque/high-speed spindle.
Machine Spindles

Machining Center offers high torque/high-speed spindle.

To hog cast iron and aluminum on same machine, CNC Jaguar(TM) horizontal machining center (HMC), with optional spindle, performs both high-speed and high-torque cutting without changing spindles. HMC utilizes 50% of spindle torque when cutting 6061-T6 aluminum with 2 mm depth-of-cut at 8000 rpm and 15840 mm/min feed. Conversely, it can cut cast iron at 463 rpm and 940 mm/min feed rate with 5 mm...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers