Solid State Relays

Telecom Relay suits low power consumption designs.
Solid State Relays

Telecom Relay suits low power consumption designs.

With 16 pin DIP footprint, model AZ8222, 2-pole telecom relay has DC coils from 3-48 Vdc in 3 sensitivities: Standard (320 mW), Sensitive (200 mW), and Ultra-Sensitive (150 mW). Bifurcated cross-bar contacts and switching capacity of 60 W or 125 VA make product suited for use in low power consumption designs. Unit meets FCC Part 68 requirements for 1,000 Vrms dielectric strength and 1,500 V...

Read More »
Solid State Relays offer various ratings and control modes.
Solid State Relays

Solid State Relays offer various ratings and control modes.

SSR Series Power Controllers feature ruggedized construction, touch safe exterior, back-to-back SCR design, ambient ratings of 40Â-ºC, and DIN rail mounting. Products are rated for 25, 50, and 75 A at voltages up to 600 Vac and provide zero-fired single phase control with control signals of 4.5-32 Vdc, 24-265 Vac, or 24-190 Vdc. Other features include self-lifting terminals, LED status...

Read More »
Solid State Relays

Solid State Relay blocks voltages up to 800 V.

Model CPC1978J optically-coupled SSR has load current handling capability up to 10 A and offers low on resistance of 2.3 Ohms. It is packaged in i4-PAC(TM), which features silicon soft-soldered onto Direct Copper Bond substrate, providing 2,500 Vrms isolation from leads to backside of packages and enabling thermal resistance of 0.45 K/W from junction to heatsink. Applications include motor...

Read More »
Solid-State Relays reduce heat sink requirements.
Solid State Relays

Solid-State Relays reduce heat sink requirements.

Offered with integrated, removable finger-proof covers, CW24 and CW48 provide LED status indication and universal connectors. Available in steady-state current ratings of 10, 25, 50, 90, and 125 A rms, products have high surge ratings in silicon-controlled rectifier, AC-switch output configuration. Series CW48 and CW24 have respective blocking ratings of 1,200 and 600 Vpk and come in universal...

Read More »
Relay Assemblies interface with various control input signals.
Solid State Relays

Relay Assemblies interface with various control input signals.

Intelligent Control Solid State Relay Assemblies are rated for loads up to 100 A at 40°C. Assemblies consist of Solid State Relays attached to anodized aluminum heat sinks. DIP switch on each unit allows selection of control inputs. Cycle times of 200 msec, 1, 10, and 100 sec are available. Line voltage options include 24-280 Vdc, 48-530 Vac, and 48-530 Vdc. Units have transient overvoltage...

Read More »
Solid State Relay has output status LED.
Solid State Relays

Solid State Relay has output status LED.

DIN rail mounted SSN solid-state relay employs LED to show output status and is supplied with built-in heat sink. Able to be specified for 15 or 25 A max load current, product suits applications where close horizontal mounting is desired. Unit measures 3.9 in. high, has a depth of 3.9 in., and requires .85 in. of DIN rail space. It accepts DC input signals of 4.5-30 Vdc and is UL recognized and...

Read More »
Solid-State Relays provide start-stop, on-off switching.
Solid State Relays

Solid-State Relays provide start-stop, on-off switching.

Totally encapsulated, Series SSR is impervious to shock and vibration and can be mounted anywhere. Units amplify current handling capabilities on pressure, level, and flow sensors. Each features SPST, normally open switch operation. Models SSR-25 and SSR-210 operate from 24-260 Vac with max load of 5 A and 10 A, respectively. Model SSR-312 operates from from 100-130 Vac with max load of 5 A, and...

Read More »
Solid State Relays

Relays and Couplers suit appliance and HVAC markets.

Solid State Relay (SSR) and Phototriac Coupler components offer AC switching and control. Small power 8-pin DIP SSRs are offered in zero-cross and non-zero cross type. SSR components' drive current ranges from 60 mA to 16A. Rated 1.2 A, 8-pin DIP SSRs are also available. PC2 and PC3 lines of DIP-6 and expanded DIP-4 Phototriac Couplers include 200 V line with and without Zero cross functionality...

Read More »
Switch Modules have fully integrated controls.
Solid State Relays

Switch Modules have fully integrated controls.

Medium-Current PowerMod(TM) Solid-State switch modules include gate drive, power, over-current protection, pulse-width frequency error checking, and fault handling. Stackable from 11-66 KV, units provide over 99% switching efficiency, less than 500 ns switching times, pulse frequencies up to 100 KHz, and adjustable pulse widths from submicroseconds to DC, on pulse-to-pulse basis. Single...

Read More »
Solid State Relays

Solid State Relays have "intelligent" features.

OMEGA® SSRINT Series intelligent" Solid State Relays are optically isolated, have 1,200 V blocking voltage, 4,000 V isolation, zero voltage turn on, and built-in snubber. Fully integrated with heat sink and DIN rail mounting plate in space-saving design, relays automatically shut down in over-temperature conditions, and turn back on when returned to normal operating temperatures.

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics