Solid State Relays

Solid State Relays

Solid State Electrical Switches operate at 15-90 psi.

Self-contained within sealed housing, Electrical Switches employ solid state pressure sensor and surface mount interface electronics. Switches have separate solid-state PNP (sourcing) and NPN (sinking) outputs, and are rated at 200 mA each. They are used with QuickSTOP collision sensors, which operate on air pressure to immediately send shutdown signal on impact.

Read More »
Solid State Relays

Solid State Relay targets security applications.

Employing optically coupled MOSFET technology, 60 V Model CPC1014N provides 1,500 Vrms of input/output isolation, 400 mA current handling, and 2 W of on-resistance. Normally open, 1-Form-A relay is housed in 4-pin SOP, and is especially suited for security systems complying with EN50130-4, passive infrared detectors, data signaling, and sensor circuitry applications.

Read More »
Relays are approved for Class 1, Division 2 hazardous areas.
Solid State Relays

Relays are approved for Class 1, Division 2 hazardous areas.

Featuring SPDT configuration with screw clamp termination, MICROSERIES Class 1 Division 2 relays come in 12 Vdc, 24 Vdc, 24 Vuc, 120 Vuc, and 230 Vuc versions. Each of 3 VUC versions accept AC and DC input signals for application flexibility. Also available, RC version features inductive kickback protection, via integrated RC circuit at input, to ensure safe switching threshold. All 6.1 mm wide,...

Read More »
GN Series Solid State Relay
Solid State Relays

GN Series Solid State Relay

09/01/08 Crouzet Solid State Relays, an operation of Custom Sensors & Technologies (CST), announces the improved GN series of solid state relays. Complying with the IEC IP20 touch safe regulation, the GN series now offer a clear plastic cover accepting larger size wire terminals suitable for up to #6 AWG wire and featuring an unrestricted view of wire installation. The overall height of the relay...

Read More »
Relay Output Module features USB/104 form-factor.
Solid State Relays

Relay Output Module features USB/104 form-factor.

Measuring 3.550 x 3.775 in., Model USB-IDIO-16 features 16 individually optically isolated inputs and 16 fully protected, solid-state FET outputs capable of switching from 5-34 Vdc at up to 2 A. Unit is compatible with USB 1.1 and USB 2.0 ports and offers hot-plug functionality for quick connect/disconnect. Suited for industrial environments, module includes jumper-selectable filtering per input...

Read More »
Solid State Relay is microprocessor controlled.
Solid State Relays

Solid State Relay is microprocessor controlled.

Featuring analog input and proportional output capabilities, RJ1P Series is capable of switching single phase 230, 480, or 600 Vac, up to 50 Aac loads with 5 different operating modes, when controlled by 0-10 Vdc or 4-20 mA signals. Rotary selector stitch is used for selecting preferred mode of operation, either phase angle, distributed full cycle, or 3 types of burst modes (1, 3, and 10 sec)....

Read More »
Solid-State Switch occupies one 3U PXI slot.
Solid State Relays

Solid-State Switch occupies one 3U PXI slot.

Consisting of 64 x 4 solid state switching matrix, Model 40-500 is capable of hot switching voltages up to 60 V. Unit can sustain inrush currents of 1.5 A for 100 ms and continuously carry 0.5 A on each cross-point switch. Y axis supports 3 A continuous current, allowing each Y axis to be connected to multiple X connections carrying high currents on each cross-point. Using 78-way D Type...

Read More »
Solid State Relays

Coaxial PIN Diode Switches handle broadband speed.

Offered as SPDT (P9402A/C), single-pole four-throw (P9404A/C), and transfer (P9400A/C) switch models with operating frequencies from 100 MHz to 8 or 18 GHz, coaxial solid-state switches suit R/D and manufacturing engineers designing manufacturing test systems or requiring fast switching solution to validate component performance. Each offers 380 ns switching speed and over 80 dB port-to-port...

Read More »
Digital Current Switches have solid or split core design.
Solid State Relays

Digital Current Switches have solid or split core design.

CSS and CSC Series self-powered switches utilize magnetic current sensing technology, are offered with 135 or 200 A output, and have switch load capacity of 1 A at 30 V ac/dc maximum. CSS has solid core with wide orifice for pass-through of conductor and is available in 3 models with setpoints as low as 0.25 A. Featuring split core and suited for retrofit applications, CSC series is offered in 5...

Read More »
Solid State Relays

Relay Modules are suited for railroad engineering.

Certified according to DIN EN 50155 VDE 0115 Part 200 railroad standard, 6 or 14 mm pluggable PLC RW relay modules operate over ambient temperature range of -40 to + 70°C, and have vibration and shock features. With 1 or 2 changeover contacts, coupling relay modules come equipped with spring cage connectors and can switch loads up to 250 Vac/10 A. Wear-free solid state relays in accordance...

Read More »

All Topics