Software

Optics & Photonics, Software, Test & Measuring Instruments, Vision Systems

Trimble Demonstrates Comprehensive Geospatial Workflows at INTERGEO 2015

Sep 21, 2015

Solutions with Optimal Accuracy and Greater Productivity for Geospatial Professionals STUTTGART, Germany - Trimble (NASDAQ: TRMB) announced today it will demonstrate its comprehensive portfolio of Geospatial solutions at INTERGEO 2015. Trimble's portfolio of aerial imaging, mass and point data capture, GIS mapping and terrestrial imaging tools enable surveying, engineering and mapping... Read More

Controls & Controllers, Material Handling & Storage, Software, Transportation Industry Products

Econolite to Feature a Comprehensive Line up of ITS Solutions at the 2015 ITS CA Annual Meeting

Sep 21, 2015

Anaheim, Calif. - Econolite today announced that it will showcase its latest in vehicle detection solutions, traffic cabinets and controllers, Centracs® ATMS and Connected Vehicle applications at the upcoming 2015 ITS California Annual Meeting being held September 21-23 at the LAX Hilton. Econolite will welcome attendees to its booth (#17), where company representatives will be on hand to... Read More

Software, Test & Measuring Instruments

TDM Unites Businessmen, Designers and Manufacturers

Sep 15, 2015

In response to Industry 4.0 TDM Systems demonstrates how productive Tool Data Management can help reduce cost within the planning and productions process. The focus of Industry 4.0 is to optimize manufacturing through an overall approach, a logical development in recent years. It is nothing more than the automation and networking of production systems. Such systems are able to provide information... Read More

Machinery & Machining Tools, Software

Cadence to Showcase Latest PCB Design Tools at PCB West 2015

Sep 14, 2015

Media Alert: Cadence to Showcase Latest PCB Design Tools at PCB West 2015 SAN JOSE, Calif. - Cadence Design Systems, Inc. (NASDAQ: CDNS) plans to feature its latest scalable OrCAD® and Allegro® technologies at PCB West 2015 in booth #406 from September 15-17, 2015, in Santa Clara, Calif. WHAT: Cadence® is scheduled to hold demonstrations and presentations in its booth highlighting new... Read More

Software, Test & Measuring Instruments

Portable M-PHY Protocol Analyzer supports UniPort/UFS.

Sep 04, 2015

Eclipse X34 monitors, captures, decodes, and analyzes protocol traffic from multiple interfaces: SSIC, MPCIe, and UniPort/UFS. Configurable analyzer, supporting GEAR1, GEAR2, and GEAR3 at high speeds and G0-G7 at low speed and low power, captures up to 4 lanes of data traffic (up to 8 when linked to another Eclipse X34). Trace-buffer options exist for up to 3 GB for single analyzer and... Read More

Software

Structural Analysis Software includes 3D CAD modeler.

Sep 03, 2015

Equipped with 3D CAD modeler and 64-bit multi-processor solvers, GT STRUDL® 2015 offers fully integrated, database-driven system for frame and finite element linear and nonlinear static and dynamic analysis as well as comprehensive steel and reinforced concrete design. CAD modeler enables users to create simple to highly complex structural models for analysis and design purposes and to display... Read More

Services, Software

Online 3D Model Library streamlines architectural workflow.

Sep 02, 2015

Offering built-in parameters, metadata, and additional intelligence, online Architect Library provides links to individual product files in 3D Revit® building information models (BIM) as well as compressed bulk files for Ultra Series and VistaLuxe Collection window and door families. BIM tools allow architects to view products from different perspectives while incorporating design... Read More

Material Handling & Storage, Software

TDM Systems Tool Crib Module Helps Reduce Machining Downtime

Sep 02, 2015

The TDM Tool Crib Module from TDM Systems, a manufacturer of tool and resource management software, organizes tools and production resources including those tools that are located off-site. The TDM Tool Crib Module can map each physical crib and adapt itself to the user. At the same time, it integrates easily in terms of Tool Lifecycle Management into higher level systems. The Module is flexible... Read More

Controls & Controllers, Software

Galaxy Control Systems Earns GSA FIPS 201 Approval

Sep 01, 2015

System Galaxy Now Listed on Approved Products List Walkersville, MD  - Following an extensive testing and evaluation process, System Galaxy from Galaxy Control Systems has earned Federal Information Processing Standard Publication 201 (FIPS 201) Certification and is now on the GSA Approved Products List (APL) in the PACS Infrastructure category. “U.S. Government agencies rely on the GSA... Read More

Software, Test & Measuring Instruments

Vi TECHNOLOGY to Exhibit the Latest Generation of SPI and Sigma Review Software at SMTAI

Sep 01, 2015

Saint-Egrève, France – Vi TECHNOLOGY, a leading provider of inspection solutions for PCB assembly, will exhibit in Booth #808 at SMTA International, scheduled to take place Sep. 29 - 30, 2015 at the Donald Stephens Convention Center in Rosemont, IL. Company representatives will demonstrate its complete SMT inspection solutions, including the PI series (SPI), K series (AOI) and Sigma Link... Read More

Fluid & Gas Flow Equipment, Laboratory and Research Supplies and Equipment, Software

Hospira Announces First Installation of Plum 360(TM) Infusion System with Hospira MedNet(TM)

Sep 01, 2015

Next-generation infusion system offers expanded drug library and EMR interoperability LAKE FOREST, Ill. – Hospira, Inc. (NYSE: HSP), the world's leading provider of injectable drugs and infusion technologies, today announced the first installation of the Plum 360™ infusion system with Hospira MedNet™, at Shannon Medical Center in San Angelo, Texas. The Plum 360 infusion system,... Read More

Software

Discover 2D/3D Interface Analysis Software from Akrometrix LLC at SMTAI

Aug 31, 2015

ATLANTA, GA– Akrometrix LLC, the leader in elevated temperature surface characterization, will exhibit in Booth #134 at SMTA International, scheduled to take place Sep. 29 - 30, 2015 at the Donald Stephens Convention Center in Rosemont, IL. Company representatives will demonstrate the Interface Analysis software that allows high level and in-depth review of the attachment interface between two... Read More

Safety & Security Equipment, Software

Emergency Response System offers web-based communications.

Aug 31, 2015

Included in Rapid Emergency Response System, Command & Control Incident Management System uses web-based communication portal to manage life-threatening events such as armed intruders and natural disasters. When activated, text/email/voice notifications are sent to pre-determined stakeholders and Command Group is established. Command Group accesses portal via internet-enabled device for secure... Read More

Software

Zebra Imaging Launches 3D Hologram Creator for Autodesk Revit

Aug 28, 2015

Easy Creation Process Brings Holographic Imaging to AEC Community AUSTIN, Texas — Zebra Imaging, a leader in 3D holographic visualization technology, announced today the immediate availability of a 3D Hologram Creator plugin for Autodesk Revit Building Information Modeling (BIM) software. Now all Revit users can quickly and easily create designs that can be printed as visually stunning 3D... Read More

Software

3D Systems Releases GibbsCAM 2015 Software for Production Machining

Aug 27, 2015

ROCK HILL, S.C. -   -- Incorporates dozens of innovative new features and powerful new Universal Kinematic Machine (UKM) engine   -- Key component of 3DS' digital design and fabrication solutions integrating traditional and advanced manufacturing ROCK HILL, S.C. - 3D Systems (NYSE:DDD) announced today that it has begun shipping the latest version of GibbsCAM®, its software for... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Electrical Equipment & Systems, Materials & Material Processing, Optics & Photonics, Software, Test & Measuring Instruments, Vision Systems

Range of FOR-A Video Production Solutions to Make Show Debut at IBC 2015

Aug 27, 2015

Booth highlights include the compact FT-ONE-S 4K camera, new version of the HVS-2000 vision mixer, and HVS-100 vision mixer with Brainstorm software via Thunderbolt2 interface Brugherio, Italy, – At the upcoming IBC Show, FOR-A will showcase a variety of video production solutions, including its new FT-ONE-S compact 4K high speed camera, the company’s popular line of vision mixers,... Read More

Services, Software

3D Digitizing a Salt Flat Racer for Speed Performance Adjustments during Speed Week

Aug 26, 2015

PROJECT:  3D scanning a salt flat racer to make performance improvements during speed week. CHALLENGE:  In order to improve performance, HELIMEC needed to get the car scanned onsite in Bonneville, Utah so that a computer model could be brought into CAD and put through CFD testing to decide on aerodynamic profile changes. SOLUTION:  With Scansite’s extensive experience, HELIMEC got the... Read More

Software, Test & Measuring Instruments

ATS Acquires Realtime SPC Measurement Software QS-Pro

Aug 26, 2015

ATS is proud to announce the acquisition of the realtime SPC measurement software package, QS-Pro (formerly known as Cadar), from DTS Digital Ltd. in the United Kingdom. This software solution is now being introduced under the new brand name of ATS SPC. ATS SPC is a comprehensive Statistical Process Control software measurement analysis application, in which results are displayed in real-time.... Read More

Software

CAD Software supports bearing design and rotor dynamics.

Aug 20, 2015

Used for design, redesign, and analysis of turbomachinery, AxSTREAM is available with AxSTREAM Bearings module, which allows users to design and analyze detailed models of bearings for different configurations by performing steady-state, transient, and map analysis. Module’s capabilities produce results used in rotor dynamics analysis. AxSTREAM RotorDynamics performs this analysis of firm and... Read More