
Impact Hex Bit Sockets resist wear and corrosion.
Available individually or in sets, impact hex bit sockets come in 3/8 and Â-½ in. drive versions that cover 1/8-5/8 in. standard and 2-17 mm metric sizes. Each is made from 8650 steel and precision heat-treated. Black oxide finish lends to corrosion resistance, and bits are secured by setscrew in heavy-duty, screw-type holders. Available sets include 7-piece 3/8 in. drive set, 7-piece...
Read More »Multi-Tech Shows Embedded Products in Birmingham
MINNEAPOLIS, October 11// -- Featuring New Cost Effective Serial-to-Ethernet Module Embedded Systems Show, National Exhibit Center, Birmingham, Stand # 451 Multi-Tech® Systems, Inc., a leading data communications technology company, based in suburban Minneapolis, is showcasing its full line of embedded device networking solutions at this year's Embedded Systems show in Birmingham, United...
Read More »
M12 Connectors minimize surface area needed for mounting.
Featuring M12 rear thread, Series 713 Connectors can be mounted to panels up to 3 mm thick. Units are fixed from rear of panel with hexagonal nut. Male sockets with a-coding are offered in 4-, 5-, and 8-pin versions, while b-coded version is available with 4 pins. Solder-cup contacts allow wires of any length to be terminated.
Read More »
Test Socket suits devices from 28 to 40 mm².
Designed for manual testing of devices with pitches down to 0.40 mm, CSP test socket provides minimal signal loss for high bandwidth capability via signal path of 1.95 mm. Solderless, pressure-mount compression spring probes allow device to be easily mounted to and removed from test board. Measuring 77.47 x 63.50 x 32.28 mm, sockets have contact forces of 16 g per contact for 0.40 mm pitch and 25...
Read More »
Reducing Risk Through On-Demand Manufacturing
Check out this white paper to learn how putting manufacturing safeguards in place stimulates growth and reduces risk in your supply chain.
Read More »
Micro Card Interfaces require minimal board area.
Surface-mount, 0.025 in. pitch MEC6 Series features double row of phosphor bronze contacts to mate with standard double-sided .062 in. thick cards. Designed with vertical orientation, 7 sizes offer 10, 20, 30, 40, and 50 I/Os per side non-polarized and 50, 60, and 70 I/Os per side with keying feature to assure proper card insertion. Five right-angle styles are available with 10-40 I/Os...
Read More »
IC Sockets support dense pitch QFP devices.
With 10 GHz bandwidth, Model SG-QFE-7000 accommodates 128-pin, 14 mm, 0.4 mm pitch TI Power Pad ICs without performance loss. Unit dissipates up to several watts without extra heatsinking and can handle up to 100 W with custom heatsink. Contact resistance is typically 23 mW per pin. Constructed with low inductance elastomer, sockets feature temperature range of -35 to +85°C, pin inductance...
Read More »
Spline Sockets are made from aircraft quality steel.
Suitable for use on spline fasteners and 4, 6, and 12 point fasteners, spline sockets line includes 55 SKUs, in Â-¼, 3/8, ½, ¾, and 1 in. drive models. Geometric profile of socket's 12 teeth offers large contact area between tool and spline fastener that allows user to apply more torque without damaging tool or fastener head. Sockets loosen partially rounded hex fasteners and...
Read More »Piper Plastics Manufactures Microprocessor Test Sockets Using a Ceramic-Filled Victrex® Peek® Polymer
Greenville, SC (July 18, 2006) The Semiconductor industry's demand for smaller, tight tolerance IC packages that operate at higher frequencies is making it increasingly difficult for traditional materials previously used for test socket applications. New, high performance test socket components made from a ceramic-filled VICTREX® PEEK polymer are available from Piper Plastics Inc., a...
Read More »
Memory Sockets accept 16-bit/32-bit SO-DIMM assemblies.
Suited for communications equipment and peripheral devices, 144-position, 0.8 mm pitch Series 10062086 measures 5.2 mm tall and provides 3.3 mm separation between top surface of host board and installed module. Horizontal sockets employ mechanical voltage keying to differentiate between versions that accept 2.5 V DDR or 1.8 V DDR2 memory module assemblies. Compliant with JEDEC-defined 16b/32b...
Read More »
Power Tool Parts prevent assembly line damage to products.
Offered in 165 part types, Apex® u-Guard(TM) power tool sockets, extensions, and bit holders are encased in protective skin that prevents in-system damage such as chips, scratches, dents, and dings dealt to products during assembly. Each tool features free-spinning design that lets molded skin rotate independently of socket, bit, or extension spinning inside. This lets workers grip skin and...
Read More »
Eliminate Expensive Repairs with the Hot-Shot Pipe Thawing Machine
The new Hot Shot Pipe Thawing Machine delivers an innovative and highly effective approach to thawing frozen pipes. Easy to use and versatile, it is loaded with robust features that further suit it to many challenging environments. To learn all about it, see our video.
Read More »