Electronic Sockets

ZIF Socket is suited for 0.4 mm pitch BGA.

Accommodating 12 mm BGA body size IC packages with 28 x 28 array and 515 balls, Model SG-BGA-7096 can operate at bandwidths up to 10 GHz with less than 1 dB of insertion loss, and can dissipate up to 100 W with custom heat sink. Socket requires only space on board for 2 mounting screw areas and 2.5 mm clearance around chip. Unit features typical contact resistance of 23 mW per pin, 10.15 nH pin...

Read More »
Electronic Sockets

Socket accommodates 0.4 mm pitch BGA ICs.

Designed for 7 mm package, Model SG-BGA-7070 operates at bandwidths up to 10 GHz with less than 1 dB of insertion loss. Unit dissipates up to several watts without extra heat sinking and can handle up to 100 W with custom heat sink. Contact resistance is typically 23 mW per pin. Constructed with low inductance elastomer, SG-BGA-7070 features operating temperature of -35 to +85°C, pin...

Read More »
Panel Mount Connectors feature stainless steel body.
Tool Sockets

Panel Mount Connectors feature stainless steel body.

Available in male and female versions, 763 Series M12 Threaded Sockets are offered with variety of termination styles, including DIP solder contacts, flying leads, and solder-cup contacts. Protection rating of IP68 is achieved through use of panel sealing O-rings and potting compound, which fills termination area. Provided in 4, 5, and 8 pole versions, connectors can be front or rear mounted.

Read More »
Socket Sets provide optimal torque without fastener damage.
Tool Sockets

Socket Sets provide optimal torque without fastener damage.

Made from WrightAlloy® high-strength steel, 10-piece 12-point Â-¼ in. Socket Sets feature Wright Drive® design, which provides optimal torque while distributing stress evenly over large contact area and away from fastener corners. Both standard and deep socket versions include 3/16, 7/32, ¼, 9/32, 5/16, 11/32, 3/8, 7/16, ½, and 9/16 in. sockets on clip rail.

Read More »
Electronic Sockets

Strip-Line and Collet Sockets comply with RoHS standard.

Featuring bifurcated contacts, Series 0501 and 700 strip-line sockets are designed for mounting LCDs and other high-pin count or off-centered components. Optional spacer is available, enabling both series to be mounted on 0.300, 0.600, 0.900, 1.100, and 1.300 in. centers. Also available, Series 0518 collet sockets can be cut to specific number of pins desired to fit application. Adaptable...

Read More »
Lamp Sockets

Lampholders are available in accent and wall wash models.

Series 505 ceramic metal halide track lampholders for multiple Halo track systems provide an energy efficient alternative to halogen sources. Features include track aligned die-cast extruded aluminum ballast housing, lockable tilt and rotation, lampholder locking tab, matching integral on-off switch, and silicone beam adjustment knob. Accepts 20 W MR16, 39 W and 70 W PAR30, or T6 CMH lamps.

Read More »
Electronic Sockets

Socket is designed for 1.0 mm pitch BGA packages.

Able to dissipate up to several watts without extra heat sinking, SG-BGA-8000 socket is designed for 31 mm package size and operates at bandwidths up to 10 GHz with less than 1 dB of insertion loss. It handles up to 100 W with custom heat sink and offers typ contact resistance of 23 mW per pin. Applicable for BGA pitches from 0.8-1.27 mm, socket connects all pins and optional center power pad and...

Read More »
Tool Sockets

Socket Sets withstand heavy-duty applications.

Socket sets, packaged in blow-molded plastic storage case, suit professional mechanic and automotive aftermarket applications. Respectively listed, components of 6-point 44-piece Â-¼ in. drive set and 6- or 12-point 47-piece 3/8 in. drive set include 3/16-9/16 in. and ¼-7/8 in. (standard length fractional); ¼-9/16 in. and 3/8-7/8 in. (deep fractional); 4-15 mm and 6-19 mm...

Read More »
Tamper-Proof Socket Set suits automotive applications.
Tool Sockets

Tamper-Proof Socket Set suits automotive applications.

Constructed to withstand heavy-duty applications, 10-piece tamper-proof Torx socket set is made of heat-treated alloy steel and laser-engraved for identification purposes. Smaller sizes (T10, T15, T20, T25, T27 and T30) are available in Â-¼ in. drive, while T40, T45, T50, and T55 sizes are available in 3/8 in. drive. Stored in vinyl package, products are designed to meet automotive...

Read More »
Electrical Connectors

RF Sockets suit devices with pitches as low as 0.40 mm.

High-frequency center probe test sockets can be mounted to, and removed from, test board because of 4-point, solderless, pressure-mount compression spring probes. Sockets are offered in device packages up to 13 mmÂ-², 14-27 mm², 28-40 mm², and 41-55 mm². With -55 to +150°C operating temperature range, products are used in applications such as CSP, MicroBGA, DSP,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers