BGA Package Converter speeds system board development.
Electronic Sockets

BGA Package Converter speeds system board development.

Model PC-BGA256B/BGA256E-B-01 is designed to receive 23 x 23 mm BGA, 16 x 16 array, 1.27 mm pitch on top and converts 1:1 pin mapping to 17 x 17 mm BGA, 16 x 16 array, 1 mm pitch on bottom, allowing new development system board to be tested with previous version of BGA device. Convertor can also be reversed by removing solder balls from 1 mm pitch side and adding them on 1.27 mm pitch side, and...

Read More »
Electronic Sockets

Elastomer Socket accommodates 0.5 mm pitch, 25-pin WCSP.

Designed for 2.75 x 2.75 mm package size, Model SG-BGA-7188 verifies function of IC in development system. Unit operates at bandwidths up to 10 GHz with less than 1 dB of insertion loss and contact resistance of 20 mW per I/O. Mounted using supplied hardware on target PCB with no soldering, socket incorporates quick insertion method using integrated compression plate. Temperature range is -35 to...

Read More »
Electronic Sockets

BGA Socket provides accessibility for thermal control.

Designed for 13.5 x 8 x 1.2 mm package, Model SG-BGA-7199 supports 0.65 mm pitch 176 ball BGA and operates at bandwidths up to 10 GHz with less than 1 dB insertion loss. Contact resistance is typically 20 mW per I/O. Socket incorporates quick insertion method and has mechanism for attaching thermal stream accessories. Operating from -35 to +100°C, device verifies function of IC in...

Read More »
QFN Socket survives temperatures from -55 to +155°C.
Electronic Sockets

QFN Socket survives temperatures from -55 to +155°C.

Addressing performance requirements for 0.4 mm pitch devices, SBT-QFN-4008 is designed to JEDEC STD.MO-220 and features contact design with outside spring and flat etched plungers. Contactor is stamped spring pin with 34 g actuation force per pin and cycle life of 100,000 insertions. Self inductance of contactor is 1 nH, insertion loss is less than 1 dB at 7 GHz, and capacitance is 0.4 pF....

Read More »
Stamped Spring Pin Socket enables UART testing to 5 Mbps @ 1.8 V.
Electrical Contactors

Stamped Spring Pin Socket enables UART testing to 5 Mbps @ 1.8 V.

Designed for testing 7 x 7 mm QFN packages with 0.5 mm pitch, 48 positions, and center ground pad, CBT-QFN-7002 addresses requirements for testing UART serial to parallel data converter. Contactor consists of stamped spring pin with 26 g actuation force per ball and cycle life of 500,000 insertions; self inductance is 0.88 nH, insertion loss is less than 1 dB at 15.7 GHz, and capacitance is 0.097...

Read More »
Lamp Sockets

Fluorescent Ceiling Lampholder features occupancy sensor.

Occupancy Sensor Fluorescent Ceiling Lampholder for closets and closed spaces has sensor that turns lights on/off automatically in response to movement in room. Four knockout holes on box, with self-contained sensor, provide 284° field of view, and green LED indicator light blinks when motion is detected. Device automatically turns off after 3 min of inactivity, and is designed to reduce...

Read More »
Semiconductor Test Socket has modular design.
Semiconductor Processing Equipment

Semiconductor Test Socket has modular design.

Y-RED volume test socket features top side removable insert and tool-free cover mounting to minimize changeover times when testing semiconductors. Unit includes spring probe with crown plunger tip for BGA, and conical plunger tip for LGA and QFN packages. Its 2-piece pin has contact resistance below 50 mW and is stable for up to 500,000 mating cycles. Available for standard temperature range of...

Read More »
Socket Sets integrate LEDs into glass pendants.
Lamp Sockets

Socket Sets integrate LEDs into glass pendants.

Constructed of aluminum with acrylic diffuser, LEDme(TM) Quick Connect(TM) Socket Sets are finished in brushed nickel, chrome, or dark bronze. Each socket set uses 5 W and delivers 230 lumens, with color temperature of 3,500 K. Pendants can be dimmed with electronic low voltage dimmer from 100% to 15% or better. LEDme(TM) Socket Set includes a canopy and 72 inches of braided wire.

Read More »
BGA Socket is designed for 0.4 mm pitch 221 pin BGA.
Electronic Sockets

BGA Socket is designed for 0.4 mm pitch 221 pin BGA.

Designed for 7.5 x 7.5 x 0.82 mm package size, SG-BGA-7163 helps test IC for monolithic integration of GSM Baseband, RF transceiver, mixed signal, power management and RAM in a single-chip. Socket operates at bandwidths up to 10 GHz with less than 1 dB of insertion loss and offers typical contact resistance of 20 mW per I/O. Mounted on PCB using supplied hardware without soldering, socket offers...

Read More »
Double Stacked BGA Socket simultaneously tests processor and memory.
Electronic Sockets

Double Stacked BGA Socket simultaneously tests processor and memory.

Facilitating simultaneous testing of processor and memory, CBT-BGA-7002 has stamped spring pin contactor with 26 g actuation force per ball and cycle life of 500,000 insertions. Self inductance of contactor is 0.88 nH, insertion loss is less than 1 dB at 15.7 GHz, and capacitance is 0.097 pF. Featuring floating guide for precise ball to pin alignment, socket is mounted using supplied hardware on...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers