New Sockets Products

Unshielded USB 2.0 Couplers offer secure panel-mounting.

Able to be mounted on virtually any panel thickness, models ECF504B-UAA (A-A, black), ECF504B-UBA (B-A, black), ECF504-UAA (A-A, beige), and ECF504-UBA (B-A, beige) allow USB cables to be passed through panels and enclosures. Unshielded products use ECF style flange-mount design and also feature 30 -µin., gold-plated contacts that promote connection reliability with repeated mating cycles.

IC Socket accommodates 0.4 mm pitch, 56-pin QFN packages.

Designed for 7 x 7 mm package size, Model DG-QFN56B-01 operates at bandwidths up to 40 GHz with less than 1 dB of insertion loss. Socket is constructed with shoulder screw, swivel lid, and diamond particle interconnect contactor capable of 100,000 insertions. Mounted on target PCB with no soldering, device operates from -70 to +200-

Open Bottom PCB Receptacles feature organic fibre plugs.

Available in 14 sizes/styles with precision-machined brass housing, OFP-® Solder Barrier Receptacles are discrete sockets for through-hole soldering into printed circuit boards. Organic fibre plugs prevent solder, paste, or flux from contaminating internal contact during placing and soldering process. When device/mating lead is plugged into receptacle, OFP-® is knocked out, allowing mating lead...

Solderless LED Socket supports Nichia chip-on-board LEDs.

Providing mechanical and electrical connection of LED onto heat sink, Type NL2 Socket features poke-in wire termination method for 18-22 AWG solid, 18-20 AWG pre-bonded, and 18 AWG stranded wires. One-piece connector assembly has UV-resistant housing, molded polarity indicator, and cleared area designated for reflector mounting that accepts custom or commercially available optics. Applications...

Speciality Heat Exchangers 101: Considerations for Choosing the Right One for Your Application

Specialty heat exchangers play an important role in a wide variety of industrial applications, and it's crucial to select the correct device for your application. Check out this guide and learn how to choose the right heat exchanger.

BGA Socket connects all pins with 40 GHz bandwidth.

Used to socket 16 x 16 x 0.8 mm BGA packages on any application board, SM-BGA-9006 operates at bandwidths up to 40 GHz with less than 1 dB insertion loss. It dissipates few watts with compression screw and can be customized up to 100 W with modified fin design on top of screw and adding axial flow fan. Constructed with elastomer contactor, socket features shoulder screw and swivel lid that...

Hi-Temp CSP Sockets enable testing of any area-array device.

Accommodating use from -55 to +200-

Elastomer BGA Socket is intended for testing eMMC devices.

Designed for testing 0.5 mm pitch, 14 x 18 mm eMMC BGA device, SG-BGA-7219 connects all pins with 10 GHz bandwidth and operates with less than 1 dB insertion loss. Contact resistance is 20 mohm per I/O (typ), and mounting is accomplished via supplied hardware on target PCB without any soldering. Quick insertion method, using shoulder screws and swivel socket lid, accelerates IC change-out, while...

Impact Socket combines 3 socket sizes in one.

Designed for high line utility workers, Triple Square Impact Socket can be used with any impact wrench or rattle gun to install or tighten utility pole hardware. Tool has overall length of 7-¾ in. with 3 square socket openings measuring -¾ in. for -½ in. hardware, 1 in. for 5/8 in. hardware, and 1 1/8 in. for -¾ in. hardware. Featuring 13/16 in. hollow shaft, Triple Socket allows workers to...

BGA Socket accommodates 1 mm pitch, 1760 pin BGA IC's.

Designed for 42.5 x 42.5 mm package size, Model SG-BGA-6348 operates at bandwidths up to 8 GHz with less than 1 dB of insertion loss. Socket dissipates 35 W with active heat sinking and features contact resistance of 20 mW per pin, 0.01 pF capacitance to ground, and current capacity of 2 A per pin. Mounted on target PCB with no soldering, socket is constructed with screw mounting and has...

High Speed, High Density Demands Drive Evolution of Samtec's SEARAY(TM) Line

Samtec is continuing to evolve its line of SEARAY(TM) Open Pin Field Interconnects to support the demands of high speed applications requiring highly reliable, high pin count solutions. The latest additions to Samtec's SEARAY(TM) family are a Right Angle design ideal for perpendicular and high speed micro backplane applications and a Press-Fit design that combines the flexibility and convenience...

ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services

J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!