Smoke and Fume Extractors

Portable Fume Exhauster removes fumes, odors, and smoke.
Smoke and Fume Extractors

Portable Fume Exhauster removes fumes, odors, and smoke.

Place-A-Vent Model PFE can remove/ventilate fumes produced by welding, brazing, soldering, laser cutting, and plasma cutting. Product comes in Â-½ hp model, PFE-350 and 1 hp version, PFE-750. Model PFE-350 has standard 4 x 8 in. hood and inlet/outlet dia of 4 in., while PFE-750 has standard 8 x 8 in. hood and inlet/outlet dia of 6 in. Features included are high pressure fan unit fabricated...

Read More »
Mobile Fume Extractor uses MERV 15-rated nanofiber filters.
Smoke and Fume Extractors

Mobile Fume Extractor uses MERV 15-rated nanofiber filters.

Designed specifically for welding applications, FILTAIR MWX-D features 875 cfm airflow at hood and captures up to 95% of small welding fume particulates. MERV 15 rating means filter is 90% effective at filtering 0.3-1 micron sized particles found in welding fume. Extraction arm, available in 7, 10, and 12 ft lengths, is supported externally, so air flows through unobstructed. Additional features...

Read More »
Fume Extractor removes smoke, fumes, and heat at source.
Smoke and Fume Extractors

Fume Extractor removes smoke, fumes, and heat at source.

Available in 4 models with fume extraction capacities from 400-1,150 cfm, Place-A-Vent is designed for removing and ventilating fumes produced by welding, brazing, soldering, laser cutting, plasma cutting, and similar operations. It employs negative pressure system that exhausts all fumes quickly to outside or into existing ductwork. Accessories include flexible gooseneck hood support arms and...

Read More »
Extraction Hood and Filter Bank provide weld fume control.
Smoke and Fume Extractors

Extraction Hood and Filter Bank provide weld fume control.

Modular Extraction Hood features semitransparent welding strips to prevent cross drafts and control airflow direction. Double-panel roof configuration acts as in-line baffle, deflection plate, and spark arrestor to protect ductwork. Incorporating dust hopper collector and MERV 16 rated filters, Statiflex® Filter Bank can contain 1 of 8 filter units, with filtration station ranging in sizes...

Read More »
Smoke and Fume Extractors

Fume Arms come in 1.5, 2.5, and 4.5 m lengths.

Comprising of standard Speedlock components to facilitate quick replacement or addition of parts and assembly, industrial fume arms include built-in valve to allow users to adjust airflow for any application. It also features duct throttle valve, reducing cone, standard and modular ducting Lock Rings, and some Flex ducting. All brackets are external for unimpeded airflow through fume arm. Suited...

Read More »
Fluid Simulation Reduces Extractor Hood Design Time
Smoke and Fume Extractors

Fluid Simulation Reduces Extractor Hood Design Time

(January 8, 2008) - Marenco AG used EFD.Lab engineering fluid dynamics software from Flomerics to design a new extractor hood for one of their clients. The combined design and analysis time required only half the time it would have required in comparison to traditional engineering methods. Placed over a cooking range, extractor hoods remove grease, smoke and odors from the kitchen. They rely on a...

Read More »
Fume Extraction System offers 99.5% filtration efficiency.
Smoke and Fume Extractors

Fume Extraction System offers 99.5% filtration efficiency.

Designed to capture particles and pollutants produced by soldering process, Weller Model WFE2ES is suited for solder baths, hot air soldering, micro soldering, and adhesive applications. Compact filter system consists of F5 class fine-dust filter and Puratex H12 HEPA filter with active carbon. Brushless, maintenance-free turbine provides effective removal of pollutants from air while offering low...

Read More »
Fume Extraction System offers zero dust generation.
Smoke and Fume Extractors

Fume Extraction System offers zero dust generation.

Equipped with brushless motor technology, Model BVX-200 Fume Extraction System eliminates wear out of motor parts and augments motor efficiency by mitigating brush friction. It features Remote Power Switch that is equivalent in size to computer mouse and is suited for manufacturers who store system under workbench. Low Air-Flow Alarm immediately alerts users to need to change filters, and reduces...

Read More »
Smoke and Fume Extractors

Control Containment System

Modular containment enclosures for control the safe dispensing of powders to meet COSSH and GPM requirements. HEPA filtered recirculated laminar airflow over the work area; with a balanced low level extract system located in the rear wall provides safety protection for the process and the user. The extraction fans are automatically controlled to ensure near constant airflow due to filter loading....

Read More »
OK International to Unveil New Technologies at Productronica 2007, Stand A3.542
Smoke and Fume Extractors

OK International to Unveil New Technologies at Productronica 2007, Stand A3.542

OK International has confirmed plans to unveil a raft of new technologies at this year's Productronica exhibition on Stand A3.542. Being held in Munich over November 13th - 16th, Productronica 2007 will see the production assembly specialist introduce visitors to its APR-5000-DZ Advanced Package Rework System, PCT-100 Focused Preheater, DX-250 and DX-350 Series of high performance digital...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers