Luminite Product Corp Acquires Patent for Load-N-Lok
Bradford, Pennsylvania - Luminite Products Corp, a laser-engraved flexographic sleeve and cylinder supplier, announces acquisition of the patent for their mandrel-free air sleeve system ,Ã- Load-N-Lok (patent #8,307,764). The Load-N-Lok system allows the press operator improved efficiency by reducing start-up waste, improved press times, and multiple print repositionings.Ã- Now...
Read More »
Sleeve Applicator works with heat-free shrink labeling.
Available in several models and engineered for containers ranging from 500 ml to 2.5 gal, STA-Series applies standard and high-elasticity, non-heat, PE stretch sleeves onÃ- various containers sizes and shapes at speeds to 60 cpm. Applicator accommodates containers up to 13 in. high and up to 5 in. dia and is compatible with round, square, and oval packages as well as various materials. It...
Read More »
Hydraulic Hose Sleeve features ultra-tight, 6-weave construction.
Guardian(TM) hose sleeve protects equipment operators from potential injuries that could result from hose failures. Featuring polyamide 6-weave construction, sleeve restrains hose bursts at pressures up to 16,000 psi, deflects 1 mm pinhole leaks at 4,000 psi, and supports up to 250,000 abrasion cycles. It is compatible with most chemicals associated with fluid-conveyance applications and meets...
Read More »
Polyester Wire and Cable Sleeves are abrasion resistant.
Offered in flame-retardant and non-flame retardant versions in multiple sizes, RoHS-compliant Raychem Versaflex polyester sleeves are suited for cable bundling and protection of wire harnesses and hoses in industrial, commercial, and rail industries. Sleeves conform to irregularly shaped products or substrates without need to heat-shrink, and braided design allows for expansion and contraction of...
Read More »
Plastic Knobs
Knobs - Customizable Solutions To learn more about the different types of Knob solutions available, and which ones to select for your specific application, download this guide now.
Read More »PEEK Drawn Fiber offers abrasion and corrosion resistance.
Available in strands ranging from .003-.040 in., PEEK Drawn Fiber comes in natural, black, red, green, yellow, blue, orange, and violet to meet specific industry requirements for braiding identification. Woven braiding creates sleeve that can be placed over existing wire assemblies to guard against chaffing. Able to perform in temperatures up to 480Ã-
Read More »Sleeve is suited for spark lighters.
Striker Sleeve provides a way to consolidate and locate tools necessary to ignite torch and maintain torch tip, and offers protection for workers. Striker Sleeve blocks open frame of spark lighters reducing chance of it getting hung up and eliminating one more fall hazard. Able to fit on either single or triple flint spark lighters, it can be configured for welders, plumbers, and all trades...
Read More »
Welding Sleeves exceed Hazard Risk Category 4 standards.
Featuring 3-layer design that encapsulates armor material to provide protection, X-Treme welding sleeves are suited for harsh applications such as carbon-arc, sub-arc, spray-arc, and heavy-arc welding, as well as pipe and heavy TIG welding and MIG welding. They are made of fire retardant fabric that contains oxidized polyacrylonitrile fiber with Aramid strengthening agent, and does not char or...
Read More »Coated Sleeving minimizes aeroengine fire risk.
Used on glass braided shielding for aeroengine applications, PTFE-based TurconÃ-® Coating provides resistance to shearing and extreme heat. Aircraft fuel lines and steel clips can be sleeved in TurconÃ-®-treated glass braiding to minimize surface friction. Product is also suited for protecting cables installed in areas at risk of shearing, including cabling next to helicopter rotor...
Read More »
Sleeves and Bushings offer concentricity without adjustment.
Split square hole sleeve Series A 7C19 is suited for producing tooling such as milling cutters or boring bars without broaching equipment, while split square hole bushing Series A 7C18 fits any mating size collet or 3-jawed chuck. Sleeves are cold-rolled steel C1117 and range in length from -¾-5 in. Bushings are 4140 steel and hardened to Re 40-45. Broached square holes, which range from...
Read More »
Hex Hole Sleeves can replace spliced shafts and bushings.
Available in 8 different lengths from -¾-3-¼ in., carbon steel Series A 7C20 can be used as sliding couplings, extensions for socket drives, bearing carriers, and as sliding bearings. Broached hex holes maintain tolerance of -±.001 in. and range in width across flats from .128-.628 in. Sleeves can serve as replacement in applications requiring spliced shafts and bushings, where precision...
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »