New Sleeves Products

Heat Reflective Products withstand temperatures to 1,200-

Designed for moderate to severe temperature heat barrier applications, Heat Reflective Products combine aluminized fiberglass or aluminized silicone jacketing used in conjunction with pressure-sensitive adhesive closure system, stainless steel snaps, high-temperature hook and loop, or TeflonÃ-® closure system. Available in sizes from 3.8 in. dia, products provide protection for both flat and...

Pin and Sleeve Devices conform to IEC 309 standards.

Watertight plugs, receptacles, connectors, inlets, and mechanical interlock devices provide safe electrical connections in commercial and light industrial environments subject to temperature extremes, vibration, impact, dirt, moisture, corrosive elements, and wash downs. Housings are flame retardant, impact-resistant and non-corrosive Valox and nylon material. Rated to 20, 30, 60, and 100 A,...

Expandable Sleeving bundles wires and protects hoses.

Made from braided polyester yarn, Expandable Sleeving slips over wire harness or tubing by bunching it together and then stretching it to bring it back down to size. Standard sleeving is 10 mil thick, while heavy wall version is 15 mil thick and provides extra protection against extreme abrasion. Available in 5 sizes and 4 colors, sleeving cuts with hot knife or scissors and is rated to 257Ã-

Bumper Post Sleeve has ashtray attachment.

Suitable for indoor or outdoor use, low-density polyethylene thermoplastic sleeve slides over existing guard posts. Smokers Can attachment is made from flame resistant resin and has internal snuffer that extinguishes cigarettes and conceals odors. Mounting hardware is included.

Things to Consider Before Designing Custom Packaging

This e-Book provides pre-design process considerations for custom corrugated packaging.

Spiral Bands provide consistent finishes.

Ranging in size from Ã-¼-8 in. diameter with lengths from Ã-½-11 in., Spiral Bands are made from aluminum oxide abrasive grain bonded with resins to cotton cloth backing material. They provide jointless sanding surface, ensuring consistent finishes on flat and contoured surfaces. Bands are mounted on rubber expanding wheels and can be used on hand-held power tools and drill presses....

Ejector Sleeves are custom machined and finished.

Custom Ejector Sleeves can be machined from H-13, A10, S-7, and M-2 tool steel, as well as 420 and 440 stainless steels, with 0.0002 in. accuracy on ID and OD and surface finishes to 2 RMS. Sizes range from 0.016 in. ID to 2 in. OD in lengths up to 14 in. long, with or without shoulders. Customized with EDM forms, vent grooves, ribs, and other special requirements, sleeves can be supplied with...

Braided Split Sleeving features semi-rigid construction.

Available in Ã-¼-1 in. diameter, Flexo F6 is split laterally and can open up to accommodate variety of bundling requirements. Sleeving will bend to tight radius without puckering or splitting open and will not impair or affect flexibility of harnesses or hoses when installed on machinery. Offering UV resistance, Flexo F6 is rated to 257Ã-

Decorative Sleeve slides over steel bollards.

Ideal Shield decorative sleeve slides over existing steel bollards, facilitating installation. Made from Ã-¼ in. thick polyethylene thermoplastic (LDPE), each sleeve weighs 15 lb and can be customized with colors, pillars, emblems, rings, or grooves. It fits 10 in. pipe, and inserts are available to fit 6 and 8 in. pipe.

Protective Sleeving helps prevent tripping accidents.

Protecto(TM) Expandable Safety Sleeving consists of abrasion-resistant, woven plastic cable covering, available in highly visible safety colors. It expands up to 3 times its size to fit over connectors and then fits snugly over cabling for protection. Available from 1/8 to 2Ã-½ in. ID, sleeving is supplied splice-free on spools up to 1,000 ft long or precut from 4 in. long. Materials include...

Bollard installs quickly, permanently.

ShieldÃ-® Planter Bollard, made from low-density polyethylene thermoplastic, fits over existing guard posts for permanent installation. It eliminates painting, while adding color and life to steel bollards. Top portion has bowl shape to use for plants, ashtray, or birdbath. Product is available in custom colors and heights to fit 6 and 8 in. pipe.

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.