Simulators

RTD Simulator offers 8 individually programmable channels.
Simulators

RTD Simulator offers 8 individually programmable channels.

Allowing users to directly program resistances or simulated RTD temperatures, V420 simulates resistors, RTDs, thermistors, strain gages, and load cells, and remains accurate for DC, AC, or pulsed excitation. It simulates eight 2- or 4-wire resistive sensors and features fully isolated channels with up to 750 V common-mode range with overvoltage protection up to 50 V. Channels can be individually...

Read More »
Simulators

World First - Telestra 4 Level D Certification for JAA and FAA

May 1, 2009 Advanced Simulation Technology, inc. (ASTi, Herndon, VA) is pleased to announce that a Telestra 4 sound and communications system, fitted to a 737-800 simulator, was recently certified to meet Level D standards for both the JAA STD 1A amendment 3, and FAA Part 60. This simulator is the world's first certified to both standards on one device, and represents the state-of-the-art in full...

Read More »
Aeroflex IFF-45TS Avionics Test Set Receives AIMS Certification
Simulators

Aeroflex IFF-45TS Avionics Test Set Receives AIMS Certification

WICHITA, Kan. - April 30, 2009 - Aeroflex today announced its IFF-45TS avionics test set has received official certification from the U.S. Department of Defense (DoD) International AIMS Program Office. The IFF-45TS test set is now AIMS certified to perform testing and validation on identification, friend or foe (IFF) Mode 4 and 5 transponders and interrogators. In addition, the IFF-45TS will...

Read More »
Global Positioning Systems (GPS)

GPS Simulator aids in navigation device testing/development.

Able to record and replay real-world data, LabSat minimizes development time for GPS-enabled products by eliminating in-field testing. Using computer with USB 2.0 connection, it records raw signals from GPS antenna directly to HDD without any limitations on number of satellites tracked or recording length. When data is replayed, GPS engine under test will re-create all movement and satellite...

Read More »
Simulators

Solar Simulators provide spectral match for AM0 and AM1.5.

With temporal stability of ±0.15% and uniformity of ±2%, UNISIM metal halide-based solar simulators can provide 60-100 mm diameter target areas at AM0 or AM1.5 using interchangeable filter system, making them suited for solar cell research and testing. Designed to meet and surpass Class A standards, simulators provide zonal spectral control in 2 or 3 zones, allowing portions of...

Read More »
Precision Resistor Card is available in 3 configurations.
Simulators

Precision Resistor Card is available in 3 configurations.

PCI-based precision resistor card Model 50-297 comes in 3 standard configurations having resistance ranges of 1-230 W, 2 W to 13.5kW and 3W to 1.5 MW with 18, 9 and 6 channels respectively. Six channel version has setting resolution of 0.125W. All versions have software interfaces for popular programming environments based on simple resistance calls for each channel, allowing users to request...

Read More »
Simulators

Services provide classification/testing of solar products.

With Solar Simulator Classification service, multichannel OL 770, measuring between 380-1,100 nm, verifies testing instruments meet standards classifying solar simulators for PV testing. Utilizing Daystar DS-100C, which auto-scales to 600 V and has 10 and 100 A current ranges, I-V Curve tracing service measures functionality of modules/arrays. Tracer can normalize, plot, analyze, and print I-V...

Read More »
Simulators

Service verifies PCB signal integrity.

DesignWare® DDR PHY signal integrity service utilizes HSPICE® circuit simulator's signal integrity simulation and delivers integrity analysis as detailed report, which analyzes DDR3/2 memory subsystem timing budget of PCBs. Report identifies sources of system errors before prototypes of chip, package, and PCB are manufactured. Also, DesignWare DDR3/2 IP built-in data training circuits...

Read More »
Solar Simulators meet Class AAA performance requirements.
Simulators

Solar Simulators meet Class AAA performance requirements.

Oriel® Sol3A(TM) large-area, constant wave (CW) sources use xenon lamp and feature proprietary filter to meet Class A performance parameters - spectral match, non-uniformity of irradiance, and temporal instability of irradiance - without compromising 1 sun output power. Each version is certified to IEC 60904-9 2007 edition, JIS C 8912, and ASTM E 927-05 standards. Offered in 2 x 2, 4 x 4, 6...

Read More »
Miscellaneous Software

Honeywell Technology Helps Pilots Avoid Runway Overruns at Today's Increasingly Crowded Airports

Software Upgrade to Existing Honeywell Safety Equipment Available in 2009 Runway Excursions Represent 96% of Total Runway-related Accidents NBAA ORLANDO, Oct. 4, 2008 - Honeywell announced today that it has developed a software upgrade to its Runway Awareness and Advisory System that will alert pilots if their approach to an airport is not within a safe tolerance envelope of speed and glide path....

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers