Silicone

Silicone

NIP 22: WACKER Presents Highly Specialized Products and Solutions for Modern Printing Technology

Munich / Denver, September 17, 2006 - WACKER, the Munichbased chemical group, will be presenting its highly specialized solutions for modern electrophotography and inkjet technology at NIP22." Held in Denver, Colorado (USA), the tradeshow runs from September 17-22. The Group's focus will be on pyrogenic silicas as key electrophotographic toner and developer ingredients which enable toner flow and...

Read More »
Silicone Elastomer suits optical and display applications.
Silicone

Silicone Elastomer suits optical and display applications.

Featuring set-up time of 8-12 min at 75°F, room temperature cure MasterSil 415 one component silicone elastomer has dielectric strength of 500 V/mil and service temperature range of -185 to 400°F. Resistant to vibration, impact, and shock, it has Shore A hardness of 30, elongation of 400 at 75°F, and tensile strength of 325 psi. Compound can be applied on vertical surfaces...

Read More »
Silicone

Thermal Interface Material has low-viscosity formulation.

Developed to address contamination issues in dense electronic systems, EPM-2493 electronic packaging material (EPM) meets requirements of high-temperature and high-stress operating conditions in electronic packaging. This low-outgassing material is designed to work in environments with drastic temperature cycling that would otherwise result in encapsulant embrittling or outgassing.

Read More »
Instrument Displays

GE Showcases Wing-to-Wing Materials Solutions for Displays at SID 2006

Company's New Innovative Prismatic Film Boosts Brightness, Hides MoirÃ-©, and Delivers High-Temperature Performance for Today's Large LCD Screens SAN FRANCISCO - June 6, 2006 - At the Society for Information Display (SID) exhibition here at Moscone Center from Jun. 4-9, GE Plastics and GE Advanced Materials are showcasing their portfolio of proprietary breakthrough materials solutions for the...

Read More »
Thermal Management Solutions from Electrolube
Silicone

Thermal Management Solutions from Electrolube

Leading electro-chemicals manufacturer, Electrolube, offers advanced thermal management solutions to enhance reliability and life expectancy of devices and reduce failure rates. Electrolube provides a comprehensive range of products with high thermal conductivity for heat management in electronic systems. These products include silicone/silicone-free pastes (greases), adhesives, RTVs and epoxy...

Read More »
Silicone

GE's Performance-Based Silicones Portfolio Offers the Pharmaceutical Industry Innovative Solutions to Address Current & Future Trends

WILTON, CONN. - Mar. 20, 2006 - The pharmaceuticals industry is marked by regulatory requirements, changes in the medical industry, and competitive pressures. GE - Advanced Materials, Silicones addresses these issues by offering an expansive portfolio of high-performance silicone elastomer materials. GE's silicones portfolio targeted for use in pharmaceutical industry applications includes both...

Read More »
Silicone

Single-Component Silicone works in temperatures to 572°F.

Used for bonding, sealing, coating, and formed-in-place gaskets, MasterSil 800 provides users with self-leveling, free-flowing, low-viscosity material capable of filling minute crevices and voids. Non-corrosive silicone elastomer compound is room-temperature curable and adheres to metals, ceramics, woods, rubbers, and plastics without aid of primer. It has tack free time of ~20 min at ambient...

Read More »
Encapsulants

Silicones suit deep potting and sealing applications.

One-part Loctite® Nuva-Sil® Silicones cure tack-free in seconds to depth of 2 in. upon exposure to UV or high-power visible light. Translucent in appearance, products offer weather, temperature, and moisture resistance, and will not degrade or yellow on long-term exposure to light. All offer built-in fluorescence detection system that allows automatic quality inspection. These...

Read More »
RTV Silicones are suited for electrical applications.
Silicone

RTV Silicones are suited for electrical applications.

Solarite KM-2740 Series RTV (Room Temperature Vulcanizing) 2-component silicone grades include machine or manually mixed, standard and fast cure, as well as mastic, paste, or pourable. They have 1:1 mix ratio by volume or weight and are color-keyed for mix ratio verification. Electrical potting and casting silicones are UL-94V-0 approved, non-corrosive, and strippable. They produce void-free...

Read More »
RTV Silicones are suited for electrical applications.
Encapsulants

RTV Silicones are suited for electrical applications.

Solarite SI-200 Series Room Temperature Vulcanizing (RTV), 2-component, electrical potting and casting silicones are available in hardness ranges from 80A (semi-rigid) to 00 (gels). Gels are re-enterable and cure to elastic Shore 00 form with no surface residue. Products are UL-94V-0 approved, cure with high gloss, and produce void-free castings in potted electrical devices. Characteristics...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers